$13.40
Availability: In Stock
The Magpul PMAG M3 magazine for AR-15 platforms is a modern polymer magazine built to handle the demands of hunting, range work, and tactical use. Available in 10 or 20-round capacity, the M3 combines next-generation material science with proven field design to deliver reliable feeding across a wide range of AR-pattern rifles. Whether you're hunting in compliance-restricted states that require limited capacity, running prone drills on the range, or building a dependable magazine rotation, the PMAG M3 is engineered to perform without fuss.
Magpul redesigned the M3 with durability and real-world handling in mind. The body is impact and crush-resistant—it won't chip or crack from the bumps and drops that come with actual use. Inside, a long-life stainless steel spring and four-way anti-tilt follower keep rounds feeding smoothly and predictably through the magazine's constant-curve internal geometry. An over-travel insertion stop on the spine prevents damage from hard seating. The flared floorplate makes field disassembly and handling easier, and it's slim enough to work in most magazine pouches without unnecessary bulk.
Control matters when you're reloading under pressure or simply managing gear. The M3's aggressive front and rear texture and ribbed gripping surface provide positive handling in all conditions—wet, muddy, or gloved hands. The magazine achieves wide compatibility with STANAG 4179-pattern platforms including AR-15, M4, M16, SCAR, HK416, and others, so it's a smart choice if you run multiple rifle systems. Each magazine ships complete and ready to load.
| Caliber | 5.56x45mm NATO / .223 Remington |
| Capacity | 10 or 20 rounds |
| Platform Compatibility | AR-15, M4, M16, SA-80, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and other STANAG 4179 platforms |
| Color | ODG (Olive Drab Green) with gray anti-tilt follower |
| Material | Impact and crush-resistant polymer with stainless steel spring |
| Weight | 3 oz |
| Length | 3.6 inches |
| Contents | 1 complete magazine in sealed plastic bag |
The M3 is compatible with any STANAG 4179-pattern rifle, which includes AR-15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and many others. Its modified internal dimensions provide wider compatibility with both Colt-spec and non-Colt-spec platforms.
Yes. The 10-round capacity is purpose-built for compliance-restricted states and hunting applications where magazine capacity limits apply. It feeds just as reliably as the 20-round version and fits the same rifles.
Each PMAG M3 arrives as one complete, ready-to-use magazine sealed in a plastic bag. Note that a dust cover is not included.
The four-way anti-tilt follower is self-lubricating and works with the constant-curve internal geometry to ensure rounds stack and feed smoothly and predictably, reducing stoppages and simplifying disassembly for cleaning or maintenance.
SKU: 115796780 • Width: 3.75in • Height: 1.1in • Depth: 3.7in • Weight: 0.25oz
Availability: In Stock
The Magpul PMAG M3 magazine for AR-15 platforms is a modern polymer magazine built to handle the demands of hunting, range work, and tactical use. Available in 10 or 20-round capacity, the M3 combines next-generation material science with proven field design to deliver reliable feeding across a wide range of AR-pattern rifles. Whether you're hunting in compliance-restricted states that require limited capacity, running prone drills on the range, or building a dependable magazine rotation, the PMAG M3 is engineered to perform without fuss.
Magpul redesigned the M3 with durability and real-world handling in mind. The body is impact and crush-resistant—it won't chip or crack from the bumps and drops that come with actual use. Inside, a long-life stainless steel spring and four-way anti-tilt follower keep rounds feeding smoothly and predictably through the magazine's constant-curve internal geometry. An over-travel insertion stop on the spine prevents damage from hard seating. The flared floorplate makes field disassembly and handling easier, and it's slim enough to work in most magazine pouches without unnecessary bulk.
Control matters when you're reloading under pressure or simply managing gear. The M3's aggressive front and rear texture and ribbed gripping surface provide positive handling in all conditions—wet, muddy, or gloved hands. The magazine achieves wide compatibility with STANAG 4179-pattern platforms including AR-15, M4, M16, SCAR, HK416, and others, so it's a smart choice if you run multiple rifle systems. Each magazine ships complete and ready to load.
| Caliber | 5.56x45mm NATO / .223 Remington |
| Capacity | 10 or 20 rounds |
| Platform Compatibility | AR-15, M4, M16, SA-80, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and other STANAG 4179 platforms |
| Color | ODG (Olive Drab Green) with gray anti-tilt follower |
| Material | Impact and crush-resistant polymer with stainless steel spring |
| Weight | 3 oz |
| Length | 3.6 inches |
| Contents | 1 complete magazine in sealed plastic bag |
The M3 is compatible with any STANAG 4179-pattern rifle, which includes AR-15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and many others. Its modified internal dimensions provide wider compatibility with both Colt-spec and non-Colt-spec platforms.
Yes. The 10-round capacity is purpose-built for compliance-restricted states and hunting applications where magazine capacity limits apply. It feeds just as reliably as the 20-round version and fits the same rifles.
Each PMAG M3 arrives as one complete, ready-to-use magazine sealed in a plastic bag. Note that a dust cover is not included.
The four-way anti-tilt follower is self-lubricating and works with the constant-curve internal geometry to ensure rounds stack and feed smoothly and predictably, reducing stoppages and simplifying disassembly for cleaning or maintenance.
SKU: 115796780 • Width: 3.75in • Height: 1.1in • Depth: 3.7in • Weight: 0.25oz