Availability: In Stock
The Magpul MAG933-FDE aluminum bipod with M-LOK attachment is a lightweight, no-nonsense shooting rest built for AR-platform rifles and other modern sporting guns. If you spend time behind a rifle at the range, in a blind, or during field competitions, a solid bipod transforms your stability and follow-up shot capability—and this Magpul delivers that without the bulk. At just 11 ounces, it won't weigh down your setup, yet it's rigid enough to handle the forward pressure you'll load into it during prone or supported shooting positions.
The MAG933-FDE pivots on genuine versatility. Height adjusts from 6.8 to 10.3 inches across seven half-inch-spaced locking detents, so you can dial in your shooting position quickly whether you're prone, kneeling, or using an improvised rest. The bipod offers 50 degrees of tilt and 40 degrees of pan—controlled by a tool-free, glove-friendly knurled knob between the legs—and an exclusive feature lets you lock pan at zero while maintaining full tilt. That means fast sight-picture corrections without fumbling. When folded, the housing sits tight under the barrel at just under 2.3 inches deep and 3.3 inches wide, keeping your profile low and your rifle snag-free. One-handed deployment and adjustment are the norm here; spring-tensioned legs snap down and lock in place without fuss.
Built from mil-spec hard-anodized 6061 T-6 aluminum with stainless steel and reinforced polymer, this bipod is engineered for years of hard use. The staggered rubber feet grip most shooting surfaces and come out cleanly with a roll pin punch if you want to swap for alternatives. Magpul designed this to accept most Atlas-pattern replaceable feet (except Atlas 5-H), so you can tailor the feet to your environment. Made in the U.S.A., the precision tolerances and anodized finish keep squeaks and rattles out of your shooting equation.
| Attachment Type | M-LOK |
| Materials | Mil-spec hard-anodized 6061 T-6 aluminum, steel, injection-molded polymer |
| Height Range | 6.8" to 10.3" |
| Tilt | 50° |
| Pan | 40° |
| Weight | 11 oz. |
| Folded Dimensions | 2.3" deep × 3.3" wide |
| Finish | Flat Dark Earth (FDE) |
| Locking Detents | Seven half-inch spaced |
The Magpul MAG933-FDE uses M-LOK attachment, so it mounts on any rifle or handguard with M-LOK slots. That covers most modern AR-platform rifles with M-LOK-compatible rails, including many factory and aftermarket handguards.
Yes. The bipod feet come out with a roll pin punch, and the legs accept most Atlas-pattern replaceable feet. This lets you swap feet to suit your shooting surface—concrete, grass, sand, or whatever your range demands. Magpul notes compatibility with most Atlas patterns except the Atlas 5-H style.
Folded, the MAG933-FDE measures 2.3 inches deep by 3.3 inches wide and sits neatly under the barrel. Spring-tensioned legs stow forward, keeping your rifle streamlined until you need the bipod, then snap down and lock with one hand.
Yes. Magpul built the MAG933-FDE from mil-spec hard-anodized 6061 T-6 aluminum with stainless steel and reinforced polymer components. It's designed to handle forward pressure without fear of failure or warping, and the precision tolerances and anodized surfaces keep it running quietly and smoothly for years.
SKU: 115657188 • Width: 3.9in • Height: 3in • Depth: 9.5in • Weight: 0.94oz
Availability: In Stock
The Magpul MAG933-FDE aluminum bipod with M-LOK attachment is a lightweight, no-nonsense shooting rest built for AR-platform rifles and other modern sporting guns. If you spend time behind a rifle at the range, in a blind, or during field competitions, a solid bipod transforms your stability and follow-up shot capability—and this Magpul delivers that without the bulk. At just 11 ounces, it won't weigh down your setup, yet it's rigid enough to handle the forward pressure you'll load into it during prone or supported shooting positions.
The MAG933-FDE pivots on genuine versatility. Height adjusts from 6.8 to 10.3 inches across seven half-inch-spaced locking detents, so you can dial in your shooting position quickly whether you're prone, kneeling, or using an improvised rest. The bipod offers 50 degrees of tilt and 40 degrees of pan—controlled by a tool-free, glove-friendly knurled knob between the legs—and an exclusive feature lets you lock pan at zero while maintaining full tilt. That means fast sight-picture corrections without fumbling. When folded, the housing sits tight under the barrel at just under 2.3 inches deep and 3.3 inches wide, keeping your profile low and your rifle snag-free. One-handed deployment and adjustment are the norm here; spring-tensioned legs snap down and lock in place without fuss.
Built from mil-spec hard-anodized 6061 T-6 aluminum with stainless steel and reinforced polymer, this bipod is engineered for years of hard use. The staggered rubber feet grip most shooting surfaces and come out cleanly with a roll pin punch if you want to swap for alternatives. Magpul designed this to accept most Atlas-pattern replaceable feet (except Atlas 5-H), so you can tailor the feet to your environment. Made in the U.S.A., the precision tolerances and anodized finish keep squeaks and rattles out of your shooting equation.
| Attachment Type | M-LOK |
| Materials | Mil-spec hard-anodized 6061 T-6 aluminum, steel, injection-molded polymer |
| Height Range | 6.8" to 10.3" |
| Tilt | 50° |
| Pan | 40° |
| Weight | 11 oz. |
| Folded Dimensions | 2.3" deep × 3.3" wide |
| Finish | Flat Dark Earth (FDE) |
| Locking Detents | Seven half-inch spaced |
The Magpul MAG933-FDE uses M-LOK attachment, so it mounts on any rifle or handguard with M-LOK slots. That covers most modern AR-platform rifles with M-LOK-compatible rails, including many factory and aftermarket handguards.
Yes. The bipod feet come out with a roll pin punch, and the legs accept most Atlas-pattern replaceable feet. This lets you swap feet to suit your shooting surface—concrete, grass, sand, or whatever your range demands. Magpul notes compatibility with most Atlas patterns except the Atlas 5-H style.
Folded, the MAG933-FDE measures 2.3 inches deep by 3.3 inches wide and sits neatly under the barrel. Spring-tensioned legs stow forward, keeping your rifle streamlined until you need the bipod, then snap down and lock with one hand.
Yes. Magpul built the MAG933-FDE from mil-spec hard-anodized 6061 T-6 aluminum with stainless steel and reinforced polymer components. It's designed to handle forward pressure without fear of failure or warping, and the precision tolerances and anodized surfaces keep it running quietly and smoothly for years.
SKU: 115657188 • Width: 3.9in • Height: 3in • Depth: 9.5in • Weight: 0.94oz