Magpul200189073
Magpul Mag557-Mcb Pmag 30 Ar/M4 Gen M3 5.56X45$13.73
Availability: In Stock
The Magpul Mag557-Odg PMAG 30 AR/M4 Gen M3 is a 30-round 5.56x45 NATO polymer magazine built for AR15 and M4 platforms, but engineered with the flexibility to work reliably across most modern rifle systems that follow STANAG 4179 specifications. If you run an AR-15, HK 416, FN SCAR, or a dozen other tactical or hunting rifles, this magazine delivers the same dependable feed reliability that has made PMAG the standard in professional and civilian arsenals. The Gen M3 generation represents a real step forward in durability and user experience—tougher materials, smarter geometry, and thoughtful details that matter when you're at the range, in the field, or testing your gear under stress.
What sets the Gen M3 apart is the attention to the mechanics that keep magazines running. The constant-curve internal design ensures smooth, reliable feeding with minimal wear on your ammunition. The four-way anti-tilt follower and long-life stainless steel spring handle thousands of cycles without degradation, so your older mags and new ones behave identically. The redesigned bolt catch notch gives better clearance on compatible rifles, while the over-travel stop on the spine prevents the magazine from seating too deep—small fixes that eliminate common frustrations.
Magpul's practical touches show up everywhere. The flared, easy-disassembly floorplate makes field cleaning and magazine handling intuitive, and it's slimmer than earlier designs so it fits comfortably in tight double and triple mag pouches. Low-profile ribs and aggressive front-and-rear texturing give you a secure grip in wet or cold conditions. The paint-pen dot matrix on the bottom lets you mark loads and ammunition types for quick identification when seconds count. Manufactured in the USA to exceed military performance standards, this is a magazine that earns its reputation through simplicity and proven performance.
| Caliber | 5.56x45mm NATO / .223 Remington |
| Capacity | 30 rounds |
| Platform Compatibility | AR15, M4, M16, SA-80, SCAR MK16/16S, HK 416, MR556, M27 IAR, IWI Tavor, and other STANAG 4179-compliant platforms |
| Weight | 5 oz. |
| Maximum Length | 7.5 in. |
| Material | Impact and crush-resistant polymer |
| Spring | Long-life stainless steel (USGI-spec) |
| Color | Olive Drab Green (Odg) |
| Manufacture | USA |
Yes. The Magpul PMAG 30 Gen M3 is designed specifically for AR15 and M4 platforms, and also works reliably with most other rifles using STANAG 4179 specifications, including SA-80, HK 416, FN SCAR MK16/16S, M27 IAR, IWI Tavor, and many others.
Yes. The slim floorplate is designed to fit snugly in standard double and triple magazine pouches without binding or requiring modification.
Absolutely. The flared floorplate disassembles with no tools required, making field cleaning and maintenance straightforward. The simple design means no springs or small parts get lost during the process.
The Gen M3 uses new material technology and manufacturing processes for enhanced strength and durability. Key upgrades include a redesigned bolt catch notch with improved clearance, an over-travel stop to prevent over-insertion, and a slimmer floorplate for better pouch compatibility. The internal geometry and spring reliability remain proven and combat-tested.
SKU: 200189106
Availability: In Stock
The Magpul Mag557-Odg PMAG 30 AR/M4 Gen M3 is a 30-round 5.56x45 NATO polymer magazine built for AR15 and M4 platforms, but engineered with the flexibility to work reliably across most modern rifle systems that follow STANAG 4179 specifications. If you run an AR-15, HK 416, FN SCAR, or a dozen other tactical or hunting rifles, this magazine delivers the same dependable feed reliability that has made PMAG the standard in professional and civilian arsenals. The Gen M3 generation represents a real step forward in durability and user experience—tougher materials, smarter geometry, and thoughtful details that matter when you're at the range, in the field, or testing your gear under stress.
What sets the Gen M3 apart is the attention to the mechanics that keep magazines running. The constant-curve internal design ensures smooth, reliable feeding with minimal wear on your ammunition. The four-way anti-tilt follower and long-life stainless steel spring handle thousands of cycles without degradation, so your older mags and new ones behave identically. The redesigned bolt catch notch gives better clearance on compatible rifles, while the over-travel stop on the spine prevents the magazine from seating too deep—small fixes that eliminate common frustrations.
Magpul's practical touches show up everywhere. The flared, easy-disassembly floorplate makes field cleaning and magazine handling intuitive, and it's slimmer than earlier designs so it fits comfortably in tight double and triple mag pouches. Low-profile ribs and aggressive front-and-rear texturing give you a secure grip in wet or cold conditions. The paint-pen dot matrix on the bottom lets you mark loads and ammunition types for quick identification when seconds count. Manufactured in the USA to exceed military performance standards, this is a magazine that earns its reputation through simplicity and proven performance.
| Caliber | 5.56x45mm NATO / .223 Remington |
| Capacity | 30 rounds |
| Platform Compatibility | AR15, M4, M16, SA-80, SCAR MK16/16S, HK 416, MR556, M27 IAR, IWI Tavor, and other STANAG 4179-compliant platforms |
| Weight | 5 oz. |
| Maximum Length | 7.5 in. |
| Material | Impact and crush-resistant polymer |
| Spring | Long-life stainless steel (USGI-spec) |
| Color | Olive Drab Green (Odg) |
| Manufacture | USA |
Yes. The Magpul PMAG 30 Gen M3 is designed specifically for AR15 and M4 platforms, and also works reliably with most other rifles using STANAG 4179 specifications, including SA-80, HK 416, FN SCAR MK16/16S, M27 IAR, IWI Tavor, and many others.
Yes. The slim floorplate is designed to fit snugly in standard double and triple magazine pouches without binding or requiring modification.
Absolutely. The flared floorplate disassembles with no tools required, making field cleaning and maintenance straightforward. The simple design means no springs or small parts get lost during the process.
The Gen M3 uses new material technology and manufacturing processes for enhanced strength and durability. Key upgrades include a redesigned bolt catch notch with improved clearance, an over-travel stop to prevent over-insertion, and a slimmer floorplate for better pouch compatibility. The internal geometry and spring reliability remain proven and combat-tested.
SKU: 200189106