Loading...
Loading...
Loading...
Availability: In Stock
The Magpul PMAG GEN M3 30rd magazine in Coyote Tan is a purpose-built 5.56/.223 polymer magazine for AR-15, M4, M16, and compatible platforms. If you run an AR and want reliable, easy-to-see ammo count without fumbling in a mag pouch, the GEN M3 delivers the rugged dependability Magpul is known for. Built with next-generation impact and crush-resistant polymer, a stainless steel spring rated for long service life, and an anti-tilt follower that keeps rounds feeding smoothly under real-world conditions—this is the magazine serious shooters load into their guns.
The dual-side MagLevel windows let you visually confirm your round count at a glance. A high-visibility indicator coil on the spring and numerical markers on the body make it quick to verify you're loaded—no guessing. The redesigned floorplate is slimmer than earlier versions, so it fits tight in double and triple pouches without binding. Over-travel and bolt-catch geometry refinements ensure the magazine seats and functions correctly on a wide range of platforms, including HK 416, FN SCAR MK 16/16S, SA-80, and other STANAG 4179–spec rifles. For field ID and gear organization, paint pen dot matrices molded into the bottom panel let you mark mags however you like.
This is tool-free disassembly for fast cleaning, aggressive front and rear texture for positive control in any environment, and a design optimized for the abuse that comes with real use. Made in the USA. Note: dust cover not included.
| Caliber | 5.56x45mm NATO / .223 Remington |
| Capacity | 30 rounds |
| Platform | AR-15, M4, M16, and STANAG 4179–compatible rifles |
| Follower Type | Anti-tilt, self-lubricating |
| Spring | Long-life USGI-spec stainless steel |
| Material | Impact and crush-resistant polymer |
| Color | Coyote Tan |
| Maximum Length | 7.5 inches |
| Weight | 5 oz |
| Country of Origin | USA |
Yes. While optimized for Colt-spec AR-15, M4, and M16 platforms, the GEN M3's modified internal and external geometry provides wide compatibility with most STANAG 4179 rifles, including HK 416, MR556, M27 IAR, FN SCAR MK 16/16S, IWI Tavor, British SA-80, and others. Specific firearms may vary, so confirm compatibility with your platform's documentation.
The GEN M3 features next-generation polymer materials, refined geometry for broader platform compatibility, improved over-travel and bolt-catch notch design, a slimmer floorplate optimized for tight mag pouches, and the MagLevel windowed system for rapid round-count verification. All improvements work within the same proven anti-tilt follower and stainless steel spring architecture.
Yes. The GEN M3 is designed for tool-free disassembly, making it simple to field-strip for cleaning and maintenance.
No. This magazine does not include a dust cover—you'll need to source that separately if desired.
SKU: 115723592 • Width: 2.6in • Height: 1.3in • Depth: 7.5in • Weight: 0.38oz
Availability: In Stock
The Magpul PMAG GEN M3 30rd magazine in Coyote Tan is a purpose-built 5.56/.223 polymer magazine for AR-15, M4, M16, and compatible platforms. If you run an AR and want reliable, easy-to-see ammo count without fumbling in a mag pouch, the GEN M3 delivers the rugged dependability Magpul is known for. Built with next-generation impact and crush-resistant polymer, a stainless steel spring rated for long service life, and an anti-tilt follower that keeps rounds feeding smoothly under real-world conditions—this is the magazine serious shooters load into their guns.
The dual-side MagLevel windows let you visually confirm your round count at a glance. A high-visibility indicator coil on the spring and numerical markers on the body make it quick to verify you're loaded—no guessing. The redesigned floorplate is slimmer than earlier versions, so it fits tight in double and triple pouches without binding. Over-travel and bolt-catch geometry refinements ensure the magazine seats and functions correctly on a wide range of platforms, including HK 416, FN SCAR MK 16/16S, SA-80, and other STANAG 4179–spec rifles. For field ID and gear organization, paint pen dot matrices molded into the bottom panel let you mark mags however you like.
This is tool-free disassembly for fast cleaning, aggressive front and rear texture for positive control in any environment, and a design optimized for the abuse that comes with real use. Made in the USA. Note: dust cover not included.
| Caliber | 5.56x45mm NATO / .223 Remington |
| Capacity | 30 rounds |
| Platform | AR-15, M4, M16, and STANAG 4179–compatible rifles |
| Follower Type | Anti-tilt, self-lubricating |
| Spring | Long-life USGI-spec stainless steel |
| Material | Impact and crush-resistant polymer |
| Color | Coyote Tan |
| Maximum Length | 7.5 inches |
| Weight | 5 oz |
| Country of Origin | USA |
Yes. While optimized for Colt-spec AR-15, M4, and M16 platforms, the GEN M3's modified internal and external geometry provides wide compatibility with most STANAG 4179 rifles, including HK 416, MR556, M27 IAR, FN SCAR MK 16/16S, IWI Tavor, British SA-80, and others. Specific firearms may vary, so confirm compatibility with your platform's documentation.
The GEN M3 features next-generation polymer materials, refined geometry for broader platform compatibility, improved over-travel and bolt-catch notch design, a slimmer floorplate optimized for tight mag pouches, and the MagLevel windowed system for rapid round-count verification. All improvements work within the same proven anti-tilt follower and stainless steel spring architecture.
Yes. The GEN M3 is designed for tool-free disassembly, making it simple to field-strip for cleaning and maintenance.
No. This magazine does not include a dust cover—you'll need to source that separately if desired.
SKU: 115723592 • Width: 2.6in • Height: 1.3in • Depth: 7.5in • Weight: 0.38oz