Availability: In Stock
The Magpul MS3 Gen2 Adjustable Rifle Sling is a one-two point sling built for shooters who need real flexibility in the field. Unlike a fixed one-point or traditional two-point sling, the MS3 lets you switch between configurations on the fly—keep it tight at your side for movement and room clearing, then transition to two-point for stability when shooting from position. That versatility, combined with single-hand adjustments and solid hardware, makes it a workhorse for tactical training, patrol, and serious hunting where you might need to adapt your setup fast.
The Gen2 iteration refines what made the original MS3 so popular: a new low-profile slider keeps bulk minimal while letting you dial tension without fumbling, and the webbing length has been increased to accommodate different body sizes and gear loads. You get 1.25-inch nylon webbing that's tough and snag-free, with NIR treatment to lower infrared signature if that matters to your mission. The hardware—hardened steel Paraclips with cross-bolt locks and QPQ-treated levers—is built to last. Made in the USA and Berry Amendment compliant, so if you're buying for duty or contract work, the paperwork is already squared away.
Setup is straightforward: the rear Paraclip works with Magpul ASAP mounts, QD swivels, and snap-hook loops (3/8-inch inner diameter minimum); the front is equally flexible, compatible with Magpul RSA, M-LOK, MSA, and standard quick-detach or loop attachments. The symmetrical Paraclip design means fast transitions and emergency quick-release if things go sideways. Whether you're running a carbine on three-gun, hunting elk over open country, or training hard, the MS3 Gen2 earns its place as a sling that doesn't force you into one way of fighting.
| Overall Length | 48–60 inches with approximately 5 inches of adjustment |
| Slider Adjustment Range | 10 inches |
| Webbing Width | 1.25 inches |
| Material | Heavy-duty nylon webbing with hardened steel and polymer hardware |
| Color | Black |
| Hardware | Steel Paraclip levers with cross-bolt lock bar, QPQ salt bath nitride finish |
| Origin | Made in USA |
One-point mode uses the rear Paraclip only, keeping the sling tight to your side for maximum maneuverability during movement or in tight spaces. Two-point mode, using both front and rear attachment points, distributes the rifle's weight more evenly across your chest and shoulders, providing better stability when shooting from position. The MS3 lets you switch between them without removing the sling.
The rear Paraclip works with Magpul ASAP mounts, Magpul SGA Receiver Sling Mounts, QD swivels, and snap-hook style loops with a minimum 3/8-inch inner diameter. The front is compatible with Magpul RSA, M-LOK Paraclip Sling Mounts, MSA, shotgun Forward Sling Mounts, standard QD swivels, and snap-hook loops (9/16-inch or larger recommended for full range of motion).
Yes. Each Paraclip has a cross-bolt lock bar that allows you to optionally lock the lever closed for extra security, giving you flexibility between rapid deployment and locked-down carry.
Yes. The webbing length has been increased in the Gen2 to provide a comfortable fit across a range of body types and armor configurations, including plate carriers and load-bearing equipment.
SKU: 115728273 • Width: 4.5in • Height: 1.9in • Depth: 17.6in • Weight: 0.56oz
Availability: In Stock
The Magpul MS3 Gen2 Adjustable Rifle Sling is a one-two point sling built for shooters who need real flexibility in the field. Unlike a fixed one-point or traditional two-point sling, the MS3 lets you switch between configurations on the fly—keep it tight at your side for movement and room clearing, then transition to two-point for stability when shooting from position. That versatility, combined with single-hand adjustments and solid hardware, makes it a workhorse for tactical training, patrol, and serious hunting where you might need to adapt your setup fast.
The Gen2 iteration refines what made the original MS3 so popular: a new low-profile slider keeps bulk minimal while letting you dial tension without fumbling, and the webbing length has been increased to accommodate different body sizes and gear loads. You get 1.25-inch nylon webbing that's tough and snag-free, with NIR treatment to lower infrared signature if that matters to your mission. The hardware—hardened steel Paraclips with cross-bolt locks and QPQ-treated levers—is built to last. Made in the USA and Berry Amendment compliant, so if you're buying for duty or contract work, the paperwork is already squared away.
Setup is straightforward: the rear Paraclip works with Magpul ASAP mounts, QD swivels, and snap-hook loops (3/8-inch inner diameter minimum); the front is equally flexible, compatible with Magpul RSA, M-LOK, MSA, and standard quick-detach or loop attachments. The symmetrical Paraclip design means fast transitions and emergency quick-release if things go sideways. Whether you're running a carbine on three-gun, hunting elk over open country, or training hard, the MS3 Gen2 earns its place as a sling that doesn't force you into one way of fighting.
| Overall Length | 48–60 inches with approximately 5 inches of adjustment |
| Slider Adjustment Range | 10 inches |
| Webbing Width | 1.25 inches |
| Material | Heavy-duty nylon webbing with hardened steel and polymer hardware |
| Color | Black |
| Hardware | Steel Paraclip levers with cross-bolt lock bar, QPQ salt bath nitride finish |
| Origin | Made in USA |
One-point mode uses the rear Paraclip only, keeping the sling tight to your side for maximum maneuverability during movement or in tight spaces. Two-point mode, using both front and rear attachment points, distributes the rifle's weight more evenly across your chest and shoulders, providing better stability when shooting from position. The MS3 lets you switch between them without removing the sling.
The rear Paraclip works with Magpul ASAP mounts, Magpul SGA Receiver Sling Mounts, QD swivels, and snap-hook style loops with a minimum 3/8-inch inner diameter. The front is compatible with Magpul RSA, M-LOK Paraclip Sling Mounts, MSA, shotgun Forward Sling Mounts, standard QD swivels, and snap-hook loops (9/16-inch or larger recommended for full range of motion).
Yes. Each Paraclip has a cross-bolt lock bar that allows you to optionally lock the lever closed for extra security, giving you flexibility between rapid deployment and locked-down carry.
Yes. The webbing length has been increased in the Gen2 to provide a comfortable fit across a range of body types and armor configurations, including plate carriers and load-bearing equipment.
SKU: 115728273 • Width: 4.5in • Height: 1.9in • Depth: 17.6in • Weight: 0.56oz