Wilson Combat115698160
Wilson Combat Extended Oversize Bolt Catch AR-15 Matte Finish$33.95
Loading...
Loading...
Loading...
Availability: In Stock
The Magpul BAD Lever Extended Bolt Catch for AR-15 addresses a fundamental workflow frustration: reaching the bolt catch while staying in your firing position. This extended paddle mounts to your existing bolt release and gives your trigger finger access to lock the bolt back without breaking your grip or shifting your hand. It's a straightforward upgrade that shaves seconds off reloads and malfunction drills on standard mil-spec AR-15 and M16 receivers.
Built from billet 6061-T6 aluminum with a hard-anodized matte finish, the BAD Lever is durable and designed to resist snagging on gear or tight-fitting cases. The textured surface provides reliable manipulation in shooting gloves or with a wet hand, and it's thin enough that it won't intrude on your trigger guard or comfort. Because it attaches with a single screw to your standard bolt catch paddle, there's no gunsmithing required—swap it in with the included Torx wrench and you're running faster reloads immediately.
The lever works for both left and right-handed shooters and doesn't lock you into a new technique. If you prefer the traditional bolt catch manipulation described in the manual of arms, you can still do that. The design simply adds an option when speed matters. Made in the USA and finished to MIL-A-8625F specifications, it's built for the shooters who run their rifles hard and expect their upgrades to keep pace.
| Brand | Magpul |
| Product | BAD Lever Extended Bolt Catch |
| Finish | Mil-Spec Anodized Aluminum Matte |
| Material | Billet 6061-T6 Aluminum |
| Anodizing Standard | MIL-A-8625F Type III Class 2 Hard Anodize |
| Mounting Hardware | Torx Screw with Nyloc Blue Patch, Torx Wrench Included |
| Compatibility | Standard Mil-Spec AR-15/M16 Receivers |
| Handedness | Ambidextrous |
| Country of Origin | USA |
Yes, if your rifle has a standard mil-spec forged receiver and bolt catch. The BAD Lever mounts directly to your existing bolt catch paddle without any gunsmithing or permanent modification. Installation takes just a few minutes with the included Torx wrench.
Absolutely. The BAD Lever is ambidextrous and functions for both left and right-handed shooters. Left-handers can manipulate the bolt catch with their firing hand just as easily as right-handed shooters.
No. The extended paddle adds a faster option when you're in your firing position, but you can still use the bolt catch the traditional way if you prefer. The thin profile and textured design maintain full access to trigger function and allow manual of arms manipulation.
The BAD Lever comes with all mounting hardware—the single Torx screw with Nyloc patch and a Torx wrench for installation. Everything you need to mount it is in the box.
SKU: 115672163 • Width: 4.1in • Height: 1.2in • Depth: 6.7in • Weight: 0.06oz
Availability: In Stock
The Magpul BAD Lever Extended Bolt Catch for AR-15 addresses a fundamental workflow frustration: reaching the bolt catch while staying in your firing position. This extended paddle mounts to your existing bolt release and gives your trigger finger access to lock the bolt back without breaking your grip or shifting your hand. It's a straightforward upgrade that shaves seconds off reloads and malfunction drills on standard mil-spec AR-15 and M16 receivers.
Built from billet 6061-T6 aluminum with a hard-anodized matte finish, the BAD Lever is durable and designed to resist snagging on gear or tight-fitting cases. The textured surface provides reliable manipulation in shooting gloves or with a wet hand, and it's thin enough that it won't intrude on your trigger guard or comfort. Because it attaches with a single screw to your standard bolt catch paddle, there's no gunsmithing required—swap it in with the included Torx wrench and you're running faster reloads immediately.
The lever works for both left and right-handed shooters and doesn't lock you into a new technique. If you prefer the traditional bolt catch manipulation described in the manual of arms, you can still do that. The design simply adds an option when speed matters. Made in the USA and finished to MIL-A-8625F specifications, it's built for the shooters who run their rifles hard and expect their upgrades to keep pace.
| Brand | Magpul |
| Product | BAD Lever Extended Bolt Catch |
| Finish | Mil-Spec Anodized Aluminum Matte |
| Material | Billet 6061-T6 Aluminum |
| Anodizing Standard | MIL-A-8625F Type III Class 2 Hard Anodize |
| Mounting Hardware | Torx Screw with Nyloc Blue Patch, Torx Wrench Included |
| Compatibility | Standard Mil-Spec AR-15/M16 Receivers |
| Handedness | Ambidextrous |
| Country of Origin | USA |
Yes, if your rifle has a standard mil-spec forged receiver and bolt catch. The BAD Lever mounts directly to your existing bolt catch paddle without any gunsmithing or permanent modification. Installation takes just a few minutes with the included Torx wrench.
Absolutely. The BAD Lever is ambidextrous and functions for both left and right-handed shooters. Left-handers can manipulate the bolt catch with their firing hand just as easily as right-handed shooters.
No. The extended paddle adds a faster option when you're in your firing position, but you can still use the bolt catch the traditional way if you prefer. The thin profile and textured design maintain full access to trigger function and allow manual of arms manipulation.
The BAD Lever comes with all mounting hardware—the single Torx screw with Nyloc patch and a Torx wrench for installation. Everything you need to mount it is in the box.
SKU: 115672163 • Width: 4.1in • Height: 1.2in • Depth: 6.7in • Weight: 0.06oz