AeroPrecision167526904
M5 (.308) Atlas S-One 12.7'' Handguard M-Lok For Ar-308 Fde$214.99
Availability: In Stock
Current Stock: Out of stock
The Aero Precision M5 Atlas R-One 12.7'' handguard is a lightweight, purpose-built rail system for AR-308 platforms that prioritizes weight savings without sacrificing strength or modularity. Machined from 6061-T6 aluminum and topped with a full-length Picatinny rail, this M-Lok handguard delivers the slim profile and mounting flexibility serious .308 shooters demand, whether you're building a long-range rifle, a lightweight hunting setup, or a precision match gun.
The standout feature here is Aero Precision's proprietary ATLAS (Aero Taper Lock Attachment System), which uses mirrored tapered locking nuts and a turnbuckle screw to distribute clamping pressure evenly across a custom-engineered barrel nut. That engineering detail matters: the ATLAS design avoids the handguard distortion that can occur during installation with conventional mounting systems. A ratcheting detent locks everything in place and confirms proper seating. Bottom line—installation is straightforward, your barrel nut stays true, and your optics won't shift.
At 8.79 ounces (plus 4.72 oz of included hardware), the R-One keeps your rifle balanced and nimble, especially valuable if you're building a hunting rifle or a carbine you'll carry all day. The handguard incorporates quick-disconnect sling sockets at the 3, 6, and 9 o'clock positions, full M-Lok slot coverage for accessories, and a 1.3'' inside diameter that plays well with low-profile gas blocks. All hardware comes in the box—just bring your own armorer's wrench.
Compatibility note: this handguard is designed for standard AR-308 upper receivers and barrels but is not compatible with M5E1 enhanced or billet upper receivers due to indexing tabs. It's built to pair with Aero Precision's M5E1 threaded uppers for the best fit.
| Brand | Aero Precision |
| Product Line | Atlas R-One |
| Platform | AR-308 / M5 |
| Caliber | .308 Winchester |
| Length | 12.7 inches |
| Material | 6061-T6 Aluminum |
| Mounting System | ATLAS (Aero Taper Lock Attachment System) |
| Rail Configuration | Full-length top Picatinny + M-Lok |
| Handguard Weight | 8.79 oz |
| Hardware Weight | 4.72 oz |
| Inside Diameter | 1.3 inches |
| Outside Diameter | 1.5 inches |
| Sling Attachment | QD sockets at 3, 6, and 9 o'clock |
| Finish | Flat Dark Earth (FDE) |
The Atlas R-One is designed for standard AR-308 upper receivers and barrels. However, it is not compatible with M5E1 enhanced upper receivers or billet uppers due to indexing tabs. Aero Precision recommends pairing this handguard with M5E1 threaded upper receivers for optimal fit and performance.
All mounting hardware is included with the handguard. Installation requires a standard armorer's wrench, which is not provided. The ATLAS mounting system uses mirrored tapered locking nuts and a turnbuckle screw for secure, even clamping pressure.
The 12.7-inch handguard weighs 8.79 ounces. The included mounting hardware adds 4.72 ounces. This makes the complete system very lightweight, ideal for hunting rifles and carbines where weight matters.
The Atlas R-One is compatible with low-profile gas blocks, with an inside diameter of 1.3 inches and an outside diameter of 1.5 inches. Confirm your gas block fits within these dimensions before purchase.
SKU: 167527723 • Weight: 2oz
Availability: In Stock
Current Stock: Out of stock
The Aero Precision M5 Atlas R-One 12.7'' handguard is a lightweight, purpose-built rail system for AR-308 platforms that prioritizes weight savings without sacrificing strength or modularity. Machined from 6061-T6 aluminum and topped with a full-length Picatinny rail, this M-Lok handguard delivers the slim profile and mounting flexibility serious .308 shooters demand, whether you're building a long-range rifle, a lightweight hunting setup, or a precision match gun.
The standout feature here is Aero Precision's proprietary ATLAS (Aero Taper Lock Attachment System), which uses mirrored tapered locking nuts and a turnbuckle screw to distribute clamping pressure evenly across a custom-engineered barrel nut. That engineering detail matters: the ATLAS design avoids the handguard distortion that can occur during installation with conventional mounting systems. A ratcheting detent locks everything in place and confirms proper seating. Bottom line—installation is straightforward, your barrel nut stays true, and your optics won't shift.
At 8.79 ounces (plus 4.72 oz of included hardware), the R-One keeps your rifle balanced and nimble, especially valuable if you're building a hunting rifle or a carbine you'll carry all day. The handguard incorporates quick-disconnect sling sockets at the 3, 6, and 9 o'clock positions, full M-Lok slot coverage for accessories, and a 1.3'' inside diameter that plays well with low-profile gas blocks. All hardware comes in the box—just bring your own armorer's wrench.
Compatibility note: this handguard is designed for standard AR-308 upper receivers and barrels but is not compatible with M5E1 enhanced or billet upper receivers due to indexing tabs. It's built to pair with Aero Precision's M5E1 threaded uppers for the best fit.
| Brand | Aero Precision |
| Product Line | Atlas R-One |
| Platform | AR-308 / M5 |
| Caliber | .308 Winchester |
| Length | 12.7 inches |
| Material | 6061-T6 Aluminum |
| Mounting System | ATLAS (Aero Taper Lock Attachment System) |
| Rail Configuration | Full-length top Picatinny + M-Lok |
| Handguard Weight | 8.79 oz |
| Hardware Weight | 4.72 oz |
| Inside Diameter | 1.3 inches |
| Outside Diameter | 1.5 inches |
| Sling Attachment | QD sockets at 3, 6, and 9 o'clock |
| Finish | Flat Dark Earth (FDE) |
The Atlas R-One is designed for standard AR-308 upper receivers and barrels. However, it is not compatible with M5E1 enhanced upper receivers or billet uppers due to indexing tabs. Aero Precision recommends pairing this handguard with M5E1 threaded upper receivers for optimal fit and performance.
All mounting hardware is included with the handguard. Installation requires a standard armorer's wrench, which is not provided. The ATLAS mounting system uses mirrored tapered locking nuts and a turnbuckle screw for secure, even clamping pressure.
The 12.7-inch handguard weighs 8.79 ounces. The included mounting hardware adds 4.72 ounces. This makes the complete system very lightweight, ideal for hunting rifles and carbines where weight matters.
The Atlas R-One is compatible with low-profile gas blocks, with an inside diameter of 1.3 inches and an outside diameter of 1.5 inches. Confirm your gas block fits within these dimensions before purchase.
SKU: 167527723 • Weight: 2oz