AeroPrecision167527215
M4E1 223 Wylde Assembled Upper Rcvr M4 18''Bbl Rifle Blk$581.36
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The Aero Precision M4E1-T 223 Wylde assembled upper receiver delivers a complete, ready-to-run AR platform upper built around a PROOF Barrel and Aero's refined Minimal Optical Deflection (MOD) 4 Handguard. This is a plug-and-play option for hunters, precision shooters, and build enthusiasts who want a quality 18-inch upper without the hassle of sourcing and assembling individual components. The M4E1-T upper arrives fully assembled with gas block and tube installed—just pair it with a compatible lower receiver, bolt carrier group, and charging handle to go shooting.
The 18-inch .223 Wylde PROOF Barrel sits at the heart of this upper. Wylde chambers accept both .223 Remington and 5.56 NATO ammunition, giving you flexibility at the range or in the field. The 1-8 twist rate handles a broad spectrum of bullet weights, and the rifle-length gas system provides reliable operation across standard and mid-load ammunition. The barrel comes pre-installed with a low-profile gas block and standard A2 flash hider (5/8-24 muzzle threads), so you're set for duty right out of the box.
The MOD 4 Handguard is a 15-inch M-LOK interface mounted atop a full-length top picatinny rail, letting you mount optics, lights, or other accessories exactly where you want them. Three quick-disconnect sling sockets—positioned at 3, 6, and 9 o'clock—use steel liners to handle repeated QD swivel use without wear. The M4E1-T upper receiver itself features an enhanced forging that mimics a billet profile, M4 feedramps for reliable chambering, and laser-engraved T-marks for reference and alignment. The threaded design, .250 takedown pin holes, installed port door, and forward assist round out a purpose-built receiver that slots seamlessly into any mil-spec AR15 lower. Made in the USA.
Note: This upper does not include a bolt carrier group or charging handle; source those separately to complete your build.
| Chambering | .223 Wylde |
| Barrel Length | 18 inches |
| Barrel Twist | 1-8 |
| Gas System | Rifle-length |
| Gas Block Journal | .750 inch |
| Muzzle Threads | 5/8-24 |
| Handguard | MOD 4, 15 inches, M-LOK |
| Handguard Top Rail | Full-length picatinny |
| Handguard Inner Diameter | 1.2 inches |
| Handguard Outer Diameter | 1.5 inches |
| QD Sling Sockets | Three (3, 6, 9 o'clock), steel-lined |
| Upper Receiver Takedown Pin Holes | .250 inch |
| Feedramps | M4 |
| Finish | Black |
| Made in | USA |
This assembled upper receiver does not include a bolt carrier group or charging handle. You'll need to source those separately, along with a compatible lower receiver and magazine, to have a complete, functional AR.
Yes. The .223 Wylde chamber safely fires both .223 Remington and 5.56 NATO ammunition, giving you flexibility in ammo selection at the range or in the field.
Yes, the MOD 4 Handguard is compatible with low-profile gas blocks. This upper comes pre-installed with a low-profile gas block, so you're ready to go.
The MOD 4 Handguard features a full-length top picatinny rail for mounting optics and tactical accessories directly on top. The 7-sided M-LOK slots around the sides and bottom allow you to attach a wide variety of aftermarket accessories—rails, bipod adapters, hand stops, and more—to customize the handguard to your exact needs.
SKU: 167529669 • Weight: 5oz
Availability: In Stock
Current Stock: Out of stock
The Aero Precision M4E1-T 223 Wylde assembled upper receiver delivers a complete, ready-to-run AR platform upper built around a PROOF Barrel and Aero's refined Minimal Optical Deflection (MOD) 4 Handguard. This is a plug-and-play option for hunters, precision shooters, and build enthusiasts who want a quality 18-inch upper without the hassle of sourcing and assembling individual components. The M4E1-T upper arrives fully assembled with gas block and tube installed—just pair it with a compatible lower receiver, bolt carrier group, and charging handle to go shooting.
The 18-inch .223 Wylde PROOF Barrel sits at the heart of this upper. Wylde chambers accept both .223 Remington and 5.56 NATO ammunition, giving you flexibility at the range or in the field. The 1-8 twist rate handles a broad spectrum of bullet weights, and the rifle-length gas system provides reliable operation across standard and mid-load ammunition. The barrel comes pre-installed with a low-profile gas block and standard A2 flash hider (5/8-24 muzzle threads), so you're set for duty right out of the box.
The MOD 4 Handguard is a 15-inch M-LOK interface mounted atop a full-length top picatinny rail, letting you mount optics, lights, or other accessories exactly where you want them. Three quick-disconnect sling sockets—positioned at 3, 6, and 9 o'clock—use steel liners to handle repeated QD swivel use without wear. The M4E1-T upper receiver itself features an enhanced forging that mimics a billet profile, M4 feedramps for reliable chambering, and laser-engraved T-marks for reference and alignment. The threaded design, .250 takedown pin holes, installed port door, and forward assist round out a purpose-built receiver that slots seamlessly into any mil-spec AR15 lower. Made in the USA.
Note: This upper does not include a bolt carrier group or charging handle; source those separately to complete your build.
| Chambering | .223 Wylde |
| Barrel Length | 18 inches |
| Barrel Twist | 1-8 |
| Gas System | Rifle-length |
| Gas Block Journal | .750 inch |
| Muzzle Threads | 5/8-24 |
| Handguard | MOD 4, 15 inches, M-LOK |
| Handguard Top Rail | Full-length picatinny |
| Handguard Inner Diameter | 1.2 inches |
| Handguard Outer Diameter | 1.5 inches |
| QD Sling Sockets | Three (3, 6, 9 o'clock), steel-lined |
| Upper Receiver Takedown Pin Holes | .250 inch |
| Feedramps | M4 |
| Finish | Black |
| Made in | USA |
This assembled upper receiver does not include a bolt carrier group or charging handle. You'll need to source those separately, along with a compatible lower receiver and magazine, to have a complete, functional AR.
Yes. The .223 Wylde chamber safely fires both .223 Remington and 5.56 NATO ammunition, giving you flexibility in ammo selection at the range or in the field.
Yes, the MOD 4 Handguard is compatible with low-profile gas blocks. This upper comes pre-installed with a low-profile gas block, so you're ready to go.
The MOD 4 Handguard features a full-length top picatinny rail for mounting optics and tactical accessories directly on top. The 7-sided M-LOK slots around the sides and bottom allow you to attach a wide variety of aftermarket accessories—rails, bipod adapters, hand stops, and more—to customize the handguard to your exact needs.
SKU: 167529669 • Weight: 5oz