Lyman167522856
Lyman Devastator Hp Pistol Bullet Mould .44 Cal.$98.86
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The Lyman Devastator HP 9mm pistol bullet mould is purpose-built for reloaders who cast their own ammunition. This .356-diameter, 124-grain hollow-point mould cuts your casting time in half compared to traditional iron moulds, letting you produce reliable 9mm projectiles faster and more efficiently. Whether you're feeding a competition pistol, zeroing a new carry gun, or simply keeping your reloading bench supplied, a quality casting mould is the foundation of consistent, cost-effective ammo production.
Built from solid leaded steel and machined to a smooth surface, this mould is engineered to hold up to years of regular casting. The heat-treated construction and hardened steel alignment pins keep everything in spec shot after shot, while the precision-ground sprue plate—secured with tempered steel screws and spring washers—ensures minimal sprue trimming and waste. You're not buying a tool that quits after a few hundred casts; you're investing in equipment that handloaders rely on.
Lyman's design philosophy shows in the details. The reduced break-in period means you'll be up to full production much sooner than with comparable iron moulds, and the solid steel sprue plate contributes to consistent bullet weight and quality. Note that handles are sold separately, so plan accordingly when you're getting your casting station set up. If you're serious about keeping your 9mm pipeline full without buying factory ammunition, this mould is a smart addition to your reloading setup.
| Caliber | 9mm |
| Bullet Diameter | .356" |
| Bullet Weight | 124 grains |
| Bullet Style | Hollow Point (HP) |
| Mould Material | Solid leaded steel |
| Sprue Plate | Solid steel, ground flat |
Yes. Mould handles are sold separately, so you'll need to purchase one to begin casting. This is standard for Lyman casting moulds.
This leaded steel mould breaks in faster than iron—cutting the conditioning period roughly in half—and the heat-treated construction extends service life. You'll reach consistent casting results sooner and with less hassle.
Yes. The heat-treated leaded steel, hardened alignment pins, and solid sprue plate are all designed for durability and consistent output over years of regular use, making it well-suited to ongoing production.
The Devastator HP design produces a hollow-point cavity appropriate for 9mm pistol ammunition. Exact cavity dimensions and performance characteristics are determined by the mould's geometry.
SKU: 167524634 • Width: 2in • Height: 2in • Depth: 4.2in • Weight: 0.6125oz
Availability: In Stock
Current Stock: Out of stock
The Lyman Devastator HP 9mm pistol bullet mould is purpose-built for reloaders who cast their own ammunition. This .356-diameter, 124-grain hollow-point mould cuts your casting time in half compared to traditional iron moulds, letting you produce reliable 9mm projectiles faster and more efficiently. Whether you're feeding a competition pistol, zeroing a new carry gun, or simply keeping your reloading bench supplied, a quality casting mould is the foundation of consistent, cost-effective ammo production.
Built from solid leaded steel and machined to a smooth surface, this mould is engineered to hold up to years of regular casting. The heat-treated construction and hardened steel alignment pins keep everything in spec shot after shot, while the precision-ground sprue plate—secured with tempered steel screws and spring washers—ensures minimal sprue trimming and waste. You're not buying a tool that quits after a few hundred casts; you're investing in equipment that handloaders rely on.
Lyman's design philosophy shows in the details. The reduced break-in period means you'll be up to full production much sooner than with comparable iron moulds, and the solid steel sprue plate contributes to consistent bullet weight and quality. Note that handles are sold separately, so plan accordingly when you're getting your casting station set up. If you're serious about keeping your 9mm pipeline full without buying factory ammunition, this mould is a smart addition to your reloading setup.
| Caliber | 9mm |
| Bullet Diameter | .356" |
| Bullet Weight | 124 grains |
| Bullet Style | Hollow Point (HP) |
| Mould Material | Solid leaded steel |
| Sprue Plate | Solid steel, ground flat |
Yes. Mould handles are sold separately, so you'll need to purchase one to begin casting. This is standard for Lyman casting moulds.
This leaded steel mould breaks in faster than iron—cutting the conditioning period roughly in half—and the heat-treated construction extends service life. You'll reach consistent casting results sooner and with less hassle.
Yes. The heat-treated leaded steel, hardened alignment pins, and solid sprue plate are all designed for durability and consistent output over years of regular use, making it well-suited to ongoing production.
The Devastator HP design produces a hollow-point cavity appropriate for 9mm pistol ammunition. Exact cavity dimensions and performance characteristics are determined by the mould's geometry.
SKU: 167524634 • Width: 2in • Height: 2in • Depth: 4.2in • Weight: 0.6125oz