Luth-Ar115647479
Luth-AR MBA-1 Rifle Buttstock Flat Dark Earth$131.55$136.25
Availability: In Stock
The Luth-AR MBA-3 Carbine Adjustable Buttstock in Flat Dark Earth is a lightweight, highly adjustable replacement stock engineered for shooters who demand a custom fit on their AR carbine platform. Built from reinforced glass-filled nylon and tipping the scales at just 18.5 ounces—roughly half the weight of comparable stocks—the MBA-3 delivers premium adjustability without the bulk. Whether you're running a .223 or .308 AR carbine, this stock adapts to mil-spec or commercial buffer tubes (using 4 of the standard 6 positions) and lets you dial in your hold naturally.
The real value here is the 3-axis adjustable butt plate assembly, which gives you control that factory stocks simply don't offer. Adjust length of pull horizontally, fine-tune vertical pitch to match your shoulder's natural curve, and add up to a quarter-inch of lateral cast for lefty or righty shooters. The MBA-3 also adds an extra 1 inch of cheek rest height compared to Luth-AR's original buttstock, a feature that makes a real difference when running modern optics or night vision. A flat-bottom index set screw locks your stock in place and eliminates the rattle that plagues standard collapsible designs—no more fumbling with loose hardware.
This FDE model ships with a hard butt plate matched to the Flat Dark Earth finish; a black soft rubber recoil pad is available separately if you prefer. The bottom rear of the stock includes a Picatinny rail for mounting cheek risers, mag carriers, or other accessories. Installation is straightforward and takes minutes. Note that the MBA-3 is optimized for standard and magnum rifle cartridges—it's not rated for large-bore applications like .338 Lapua or .50 BMG.
| Brand | Luth-AR LLC |
| Product | MBA-3 Carbine Adjustable Buttstock |
| Color | Flat Dark Earth |
| Material | Glass-filled nylon |
| Weight | 18.5 ounces |
| Tube Compatibility | Mil-spec and commercial buffer tubes (6-position) |
| Caliber Compatibility | .223, .308, and AR carbine platforms |
| Positions Used | 4 of 6 available buffer tube positions |
| Adjustment Axes | 3-axis butt plate (horizontal, vertical, lateral) |
| Length of Pull Extension | 1 1/16 inches |
| Cheek Rest Height Advantage | Additional 1 inch vs. original MBA-1 |
| Lateral Cast Range | Up to 1/4 inch left or right |
| Recoil Pad | FDE hard butt plate (included) |
| Picatinny Rail | Yes, bottom rear of stock body |
| Set Screw | Flat-bottom index (10-24) to prevent rattle |
The MBA-3 is designed for mil-spec or commercial buffer tubes and uses 4 of the standard 6 available positions. It will not fit A2 standard buffer tubes; for those you'll need Luth-AR's MBA-1 or MBA-2 rifle stocks. Note that some aftermarket commercial buffer tubes larger than 1.172 inches in diameter may not be compatible.
The MBA-3 is rated for .223 and .308 AR carbine-style rifles and most other standard or magnum rifle cartridges. It is not designed for large-bore calibers such as .338 Lapua or .50 BMG; Luth-AR recommends their MBA-1 or MBA-2 rifle stocks for those applications.
Yes. While the vertical struts are fixed (making the cheek piece non-reversible unlike the MBA-1), the cheek piece itself is designed with padding that works for both left- and right-handed shooters. The 3-axis butt plate can also be adjusted with lateral cast for either hand.
The FDE model includes a hard butt plate finished in Flat Dark Earth. The black version comes with a medium soft rubber recoil pad (Duro 85 rating). A black soft rubber recoil pad is available separately for the FDE model if preferred.
SKU: 115647981 • Width: 5.8in • Height: 2.25in • Depth: 11.9in • Weight: 1.5oz
Availability: In Stock
The Luth-AR MBA-3 Carbine Adjustable Buttstock in Flat Dark Earth is a lightweight, highly adjustable replacement stock engineered for shooters who demand a custom fit on their AR carbine platform. Built from reinforced glass-filled nylon and tipping the scales at just 18.5 ounces—roughly half the weight of comparable stocks—the MBA-3 delivers premium adjustability without the bulk. Whether you're running a .223 or .308 AR carbine, this stock adapts to mil-spec or commercial buffer tubes (using 4 of the standard 6 positions) and lets you dial in your hold naturally.
The real value here is the 3-axis adjustable butt plate assembly, which gives you control that factory stocks simply don't offer. Adjust length of pull horizontally, fine-tune vertical pitch to match your shoulder's natural curve, and add up to a quarter-inch of lateral cast for lefty or righty shooters. The MBA-3 also adds an extra 1 inch of cheek rest height compared to Luth-AR's original buttstock, a feature that makes a real difference when running modern optics or night vision. A flat-bottom index set screw locks your stock in place and eliminates the rattle that plagues standard collapsible designs—no more fumbling with loose hardware.
This FDE model ships with a hard butt plate matched to the Flat Dark Earth finish; a black soft rubber recoil pad is available separately if you prefer. The bottom rear of the stock includes a Picatinny rail for mounting cheek risers, mag carriers, or other accessories. Installation is straightforward and takes minutes. Note that the MBA-3 is optimized for standard and magnum rifle cartridges—it's not rated for large-bore applications like .338 Lapua or .50 BMG.
| Brand | Luth-AR LLC |
| Product | MBA-3 Carbine Adjustable Buttstock |
| Color | Flat Dark Earth |
| Material | Glass-filled nylon |
| Weight | 18.5 ounces |
| Tube Compatibility | Mil-spec and commercial buffer tubes (6-position) |
| Caliber Compatibility | .223, .308, and AR carbine platforms |
| Positions Used | 4 of 6 available buffer tube positions |
| Adjustment Axes | 3-axis butt plate (horizontal, vertical, lateral) |
| Length of Pull Extension | 1 1/16 inches |
| Cheek Rest Height Advantage | Additional 1 inch vs. original MBA-1 |
| Lateral Cast Range | Up to 1/4 inch left or right |
| Recoil Pad | FDE hard butt plate (included) |
| Picatinny Rail | Yes, bottom rear of stock body |
| Set Screw | Flat-bottom index (10-24) to prevent rattle |
The MBA-3 is designed for mil-spec or commercial buffer tubes and uses 4 of the standard 6 available positions. It will not fit A2 standard buffer tubes; for those you'll need Luth-AR's MBA-1 or MBA-2 rifle stocks. Note that some aftermarket commercial buffer tubes larger than 1.172 inches in diameter may not be compatible.
The MBA-3 is rated for .223 and .308 AR carbine-style rifles and most other standard or magnum rifle cartridges. It is not designed for large-bore calibers such as .338 Lapua or .50 BMG; Luth-AR recommends their MBA-1 or MBA-2 rifle stocks for those applications.
Yes. While the vertical struts are fixed (making the cheek piece non-reversible unlike the MBA-1), the cheek piece itself is designed with padding that works for both left- and right-handed shooters. The 3-axis butt plate can also be adjusted with lateral cast for either hand.
The FDE model includes a hard butt plate finished in Flat Dark Earth. The black version comes with a medium soft rubber recoil pad (Duro 85 rating). A black soft rubber recoil pad is available separately for the FDE model if preferred.
SKU: 115647981 • Width: 5.8in • Height: 2.25in • Depth: 11.9in • Weight: 1.5oz