Leupold200188886
Leupold BackCountry Remington 700 30mm 2-pc Med (8-40 Adaptable)$80.00
Availability: In Stock
Current Stock: Out of stock
The Leupold BackCountry Remington 700 30mm 2-piece high ring mount is engineered for hunters and long-range shooters building a lightweight, durable scope setup on Remington 700 long-action receivers. Built from 7075-T6 aluminum—the same material trusted in aircraft structures—these adaptable rings deliver exceptional strength without the heft that slows you down in the field. Whether you're glassing from a ridge or working a remote drainage, every ounce matters, and at just 3.3 ounces, BackCountry mounts let your rifle stay nimble.
These two-piece rings accept any riflescope with a 30mm maintube and come equipped with both 8-40 and 6-48 fastening options, giving you flexibility to match your receiver's existing recoil lug and top-receiver screw holes. High-profile construction gives you the clearance needed for larger objective lenses and co-mounted red dots without obstruction. Set-and-forget reliability is built in: the engineering tolerances and torque specs are dialed in by Leupold, so once you dial it in at the bench, you can trust it to hold zero through the season.
If you're upgrading an existing Remington 700 or assembling a new build, these mounts bridge the gap between economy hardware and overkill premium setups. They're proof that lightweight doesn't mean compromise—just smart materials and proven design working together.
| Material | 7075-T6 Aluminum |
| Ring Diameter | 30mm |
| Ring Height | High (1.1 inches) |
| Weight | 3.3 oz |
| Receiver Screw Torque | 22 in-lbs |
| Ring Top Screw Torque | 28 in-lbs |
| Included Fasteners | 8-40 and 6-48 screws |
| Receiver Compatibility | Remington 700 long-action |
| Cant | None |
Yes, these BackCountry mounts are designed specifically for Remington 700 long-action receivers. They come with both 8-40 and 6-48 screws, so you can adapt to your rifle's existing receiver holes.
These rings accept 30mm maintube riflescopes. If your scope is 1-inch tube diameter, you'll need different rings.
The pair weighs just 3.3 ounces, making them one of the lightest mounting solutions Leupold makes without sacrificing strength.
Tighten base/receiver screws to 22 in-lbs and ring top screws to 28 in-lbs. Following these specs ensures consistent performance and helps avoid scope shift from over- or under-torquing.
SKU: 200188868
Availability: In Stock
Current Stock: Out of stock
The Leupold BackCountry Remington 700 30mm 2-piece high ring mount is engineered for hunters and long-range shooters building a lightweight, durable scope setup on Remington 700 long-action receivers. Built from 7075-T6 aluminum—the same material trusted in aircraft structures—these adaptable rings deliver exceptional strength without the heft that slows you down in the field. Whether you're glassing from a ridge or working a remote drainage, every ounce matters, and at just 3.3 ounces, BackCountry mounts let your rifle stay nimble.
These two-piece rings accept any riflescope with a 30mm maintube and come equipped with both 8-40 and 6-48 fastening options, giving you flexibility to match your receiver's existing recoil lug and top-receiver screw holes. High-profile construction gives you the clearance needed for larger objective lenses and co-mounted red dots without obstruction. Set-and-forget reliability is built in: the engineering tolerances and torque specs are dialed in by Leupold, so once you dial it in at the bench, you can trust it to hold zero through the season.
If you're upgrading an existing Remington 700 or assembling a new build, these mounts bridge the gap between economy hardware and overkill premium setups. They're proof that lightweight doesn't mean compromise—just smart materials and proven design working together.
| Material | 7075-T6 Aluminum |
| Ring Diameter | 30mm |
| Ring Height | High (1.1 inches) |
| Weight | 3.3 oz |
| Receiver Screw Torque | 22 in-lbs |
| Ring Top Screw Torque | 28 in-lbs |
| Included Fasteners | 8-40 and 6-48 screws |
| Receiver Compatibility | Remington 700 long-action |
| Cant | None |
Yes, these BackCountry mounts are designed specifically for Remington 700 long-action receivers. They come with both 8-40 and 6-48 screws, so you can adapt to your rifle's existing receiver holes.
These rings accept 30mm maintube riflescopes. If your scope is 1-inch tube diameter, you'll need different rings.
The pair weighs just 3.3 ounces, making them one of the lightest mounting solutions Leupold makes without sacrificing strength.
Tighten base/receiver screws to 22 in-lbs and ring top screws to 28 in-lbs. Following these specs ensures consistent performance and helps avoid scope shift from over- or under-torquing.
SKU: 200188868