Lee Precisiom115799095
Lee 90947 Pro 4-20 Electric Melter 1 All 110 Volt|4 Under Pot in. $93.74
Availability: In Stock
The Lee Pro 4-20 is a high-capacity bullet casting pot built for serious handloaders who cast their own projectiles in volume. This 220V melter holds approximately 20 pounds of lead, giving you the capacity to cast a full session without frequent refills. The generous 3¾-inch clearance under the spout accommodates standard bullet molds and most sinker molds, and the included adjustable mold guide lets you position any mold quickly and accurately for consistent pours.
The Pro 4-20's second-generation design combines Lee's patented high-efficiency heating with a dependable remote-sensing thermostat housed in a dust-tight enclosure. The 700-watt tubular heating element melts lead fast and recovers quickly between pours. Temperature control ranges from 450 to 900 degrees Fahrenheit, giving you the flexibility to find the sweet spot for your specific bullets—650 degrees is a solid starting point for most casting work.
Practical features make casting sessions smoother: a micro-adjustable flow control valve that adjusts with a screwdriver twist, and a front-mounted, replaceable valve spout that reseats instantly without tools. Low-maintenance design means less downtime and more time at the mold.
| Brand | Lee Precision |
| Product | Pro 4-20 Bullet Casting Pot with Adjustable Mold Guide |
| Voltage | 220V |
| Lead Capacity | Approximately 20 pounds |
| Heating Element | 700-watt tubular |
| Temperature Range | 450–900°F |
| Spout Clearance | 3¾ inches |
| Thermostat Type | Remote-sensing |
| Valve Type | Micro-adjustable flow control, replaceable spout |
The 3¾-inch clearance under the spout accepts all standard bullet molds and most sinker molds from any manufacturer. The adjustable mold guide helps you position any compatible mold quickly and accurately.
The pot reaches 450–900°F. Cast at the lowest temperature that produces good bullet fill-out. 650°F is a recommended starting point for most casting work.
The 700-watt tubular heating element melts lead quickly and recovers fast between pours, though exact melt time depends on starting lead temperature and ambient conditions.
Yes, the adjustable mold guide is included with the Pro 4-20 to help you position molds accurately and consistently.
SKU: 167524490 • Width: 9.4in • Height: 7in • Depth: 10.4in • Weight: 4.4oz
Availability: In Stock
The Lee Pro 4-20 is a high-capacity bullet casting pot built for serious handloaders who cast their own projectiles in volume. This 220V melter holds approximately 20 pounds of lead, giving you the capacity to cast a full session without frequent refills. The generous 3¾-inch clearance under the spout accommodates standard bullet molds and most sinker molds, and the included adjustable mold guide lets you position any mold quickly and accurately for consistent pours.
The Pro 4-20's second-generation design combines Lee's patented high-efficiency heating with a dependable remote-sensing thermostat housed in a dust-tight enclosure. The 700-watt tubular heating element melts lead fast and recovers quickly between pours. Temperature control ranges from 450 to 900 degrees Fahrenheit, giving you the flexibility to find the sweet spot for your specific bullets—650 degrees is a solid starting point for most casting work.
Practical features make casting sessions smoother: a micro-adjustable flow control valve that adjusts with a screwdriver twist, and a front-mounted, replaceable valve spout that reseats instantly without tools. Low-maintenance design means less downtime and more time at the mold.
| Brand | Lee Precision |
| Product | Pro 4-20 Bullet Casting Pot with Adjustable Mold Guide |
| Voltage | 220V |
| Lead Capacity | Approximately 20 pounds |
| Heating Element | 700-watt tubular |
| Temperature Range | 450–900°F |
| Spout Clearance | 3¾ inches |
| Thermostat Type | Remote-sensing |
| Valve Type | Micro-adjustable flow control, replaceable spout |
The 3¾-inch clearance under the spout accepts all standard bullet molds and most sinker molds from any manufacturer. The adjustable mold guide helps you position any compatible mold quickly and accurately.
The pot reaches 450–900°F. Cast at the lowest temperature that produces good bullet fill-out. 650°F is a recommended starting point for most casting work.
The 700-watt tubular heating element melts lead quickly and recovers fast between pours, though exact melt time depends on starting lead temperature and ambient conditions.
Yes, the adjustable mold guide is included with the Pro 4-20 to help you position molds accurately and consistently.
SKU: 167524490 • Width: 9.4in • Height: 7in • Depth: 10.4in • Weight: 4.4oz