Lee Precisiom115857261
Lee Precision 91492 Factory Crimp Die 6.5 PRC$11.61
Availability: In Stock
The Lee Precision Factory Crimp Die for 7mm PRC is a specialized reloading die that takes bullet seating beyond the standard press operation. Unlike conventional seating dies that simply push the bullet into the case, this crimp die applies a firm, consistent squeeze to the case mouth, locking the bullet in place with precision. If you're serious about 7mm PRC handloads—whether you're shooting long range, hunting, or working up competition loads—a factory crimp die can be a game-changer for consistency and accuracy.
The core advantage of a factory crimp die is repeatability. A firm crimp ensures that bullet seating pressure builds to a consistent level before the projectile moves, which stabilizes your pressure curve and reduces velocity shot-to-shot variation. That matters when you're chasing tight groups. Lee's design uses a collet that squeezes the case mouth into the bullet's crimp groove—or even works effectively on bullets without a dedicated crimp groove, which speaks to its versatility.
Installation is straightforward if you already have a reloading press: the die threads into any 7/8"-14 reloading press, the industry standard for full-length rifle dies. Keep in mind that a shellholder is not included, so you'll need the correct one for 7mm PRC if you don't have it on hand. This is a single-stage operation tool, meaning it's designed to do one job very well—apply that crimp—as part of your reload sequence, not as an all-in-one solution.
Lee Precision has built a solid reputation among reloaders who prioritize function and value. If consistency, accuracy, and tight velocity control are priorities in your 7mm PRC loads, a factory crimp die is worth considering as part of your die set.
| Cartridge | 7mm PRC |
| Die Type | Factory Crimp Die |
| Thread Size | 7/8"-14 |
| Shellholder Included | No |
| Brand | Lee Precision |
| Model | 92006 |
The Lee Factory Crimp Die threads into any reloading press with a standard 7/8"-14 die hole, which covers virtually all full-length rifle reloading presses on the market.
No. You'll need to purchase or have on hand the correct shellholder for 7mm PRC separately.
No. While the die is designed to crimp into a bullet's crimp groove when one is present, Lee's testing shows the die works effectively even with bullets that have no dedicated crimp groove.
The factory crimp die is typically used as the final step after bullet seating, to lock the bullet firmly in place. You would normally seat the bullet first with a standard seating die, then run the cartridge through the factory crimp die.
SKU: 115800441 • Width: 1.7in • Height: 1.5in • Depth: 4.9in • Weight: 0.29oz
Availability: In Stock
The Lee Precision Factory Crimp Die for 7mm PRC is a specialized reloading die that takes bullet seating beyond the standard press operation. Unlike conventional seating dies that simply push the bullet into the case, this crimp die applies a firm, consistent squeeze to the case mouth, locking the bullet in place with precision. If you're serious about 7mm PRC handloads—whether you're shooting long range, hunting, or working up competition loads—a factory crimp die can be a game-changer for consistency and accuracy.
The core advantage of a factory crimp die is repeatability. A firm crimp ensures that bullet seating pressure builds to a consistent level before the projectile moves, which stabilizes your pressure curve and reduces velocity shot-to-shot variation. That matters when you're chasing tight groups. Lee's design uses a collet that squeezes the case mouth into the bullet's crimp groove—or even works effectively on bullets without a dedicated crimp groove, which speaks to its versatility.
Installation is straightforward if you already have a reloading press: the die threads into any 7/8"-14 reloading press, the industry standard for full-length rifle dies. Keep in mind that a shellholder is not included, so you'll need the correct one for 7mm PRC if you don't have it on hand. This is a single-stage operation tool, meaning it's designed to do one job very well—apply that crimp—as part of your reload sequence, not as an all-in-one solution.
Lee Precision has built a solid reputation among reloaders who prioritize function and value. If consistency, accuracy, and tight velocity control are priorities in your 7mm PRC loads, a factory crimp die is worth considering as part of your die set.
| Cartridge | 7mm PRC |
| Die Type | Factory Crimp Die |
| Thread Size | 7/8"-14 |
| Shellholder Included | No |
| Brand | Lee Precision |
| Model | 92006 |
The Lee Factory Crimp Die threads into any reloading press with a standard 7/8"-14 die hole, which covers virtually all full-length rifle reloading presses on the market.
No. You'll need to purchase or have on hand the correct shellholder for 7mm PRC separately.
No. While the die is designed to crimp into a bullet's crimp groove when one is present, Lee's testing shows the die works effectively even with bullets that have no dedicated crimp groove.
The factory crimp die is typically used as the final step after bullet seating, to lock the bullet firmly in place. You would normally seat the bullet first with a standard seating die, then run the cartridge through the factory crimp die.
SKU: 115800441 • Width: 1.7in • Height: 1.5in • Depth: 4.9in • Weight: 0.29oz