Lee Precisiom115658289
Lee Precision 91167 Factory Crimp Die 450 Bushmaster$11.61
Availability: In Stock
The Lee Precision Factory Crimp Die for 30-06 Springfield is a reloading die built to solve one of handloading's most overlooked accuracy problems: inconsistent bullet seating. While many reloaders focus on powder charge and primer selection, this crimp die addresses a variable that directly affects how uniformly pressure builds in your chamber—and that translates to tighter groups and more predictable velocities downrange.
What makes the Factory Crimp Die different from a standard seating die is its collet design, which grips the case mouth and applies a firm, uniform crimp to the bullet. This matters because a solid crimp keeps the bullet from moving under the pressure spike that occurs when firing begins. That stability lets pressure build more consistently shot-to-shot, which means less velocity variation and better accuracy. Even bullets without a dedicated crimp groove will show improvement, which tells you this die is addressing a real mechanical issue, not a marketing angle.
The die is designed to work in any standard 7/8"-14 reloading press, so if you're already set up with common equipment, integration is straightforward. It's a no-nonsense tool for serious handloaders who've noticed that their ammo accuracy plateaus at a certain level and want to push past it. Note that a shellholder is not included, so confirm you have the right one for your 30-06 Springfield cases.
| Caliber | 30-06 Springfield |
| Type | Factory Crimp Die |
| Press Compatibility | 7/8"-14 thread (standard reloading press) |
| Model Number | 90824 |
| Shellholder | Not included |
The Factory Crimp Die has a 7/8"-14 thread and fits all standard reloading presses that use this industry-standard connection. Check your press documentation to confirm compatibility.
A shellholder is not included with the die and is sold separately. You'll need the correct shellholder for 30-06 Springfield cases to use this die in your press.
Yes. The collet-style crimp is effective even on bullets without a dedicated crimp groove, which is one advantage of this design over traditional crimping methods.
A firm crimp keeps the bullet from moving under initial pressure, which allows pressure to build more uniformly in the chamber. This consistency reduces velocity variation from round to round, resulting in tighter groups.
SKU: 115775202 • Width: 3.2in • Height: 1.4in • Depth: 3.3in • Weight: 0.25oz
Availability: In Stock
The Lee Precision Factory Crimp Die for 30-06 Springfield is a reloading die built to solve one of handloading's most overlooked accuracy problems: inconsistent bullet seating. While many reloaders focus on powder charge and primer selection, this crimp die addresses a variable that directly affects how uniformly pressure builds in your chamber—and that translates to tighter groups and more predictable velocities downrange.
What makes the Factory Crimp Die different from a standard seating die is its collet design, which grips the case mouth and applies a firm, uniform crimp to the bullet. This matters because a solid crimp keeps the bullet from moving under the pressure spike that occurs when firing begins. That stability lets pressure build more consistently shot-to-shot, which means less velocity variation and better accuracy. Even bullets without a dedicated crimp groove will show improvement, which tells you this die is addressing a real mechanical issue, not a marketing angle.
The die is designed to work in any standard 7/8"-14 reloading press, so if you're already set up with common equipment, integration is straightforward. It's a no-nonsense tool for serious handloaders who've noticed that their ammo accuracy plateaus at a certain level and want to push past it. Note that a shellholder is not included, so confirm you have the right one for your 30-06 Springfield cases.
| Caliber | 30-06 Springfield |
| Type | Factory Crimp Die |
| Press Compatibility | 7/8"-14 thread (standard reloading press) |
| Model Number | 90824 |
| Shellholder | Not included |
The Factory Crimp Die has a 7/8"-14 thread and fits all standard reloading presses that use this industry-standard connection. Check your press documentation to confirm compatibility.
A shellholder is not included with the die and is sold separately. You'll need the correct shellholder for 30-06 Springfield cases to use this die in your press.
Yes. The collet-style crimp is effective even on bullets without a dedicated crimp groove, which is one advantage of this design over traditional crimping methods.
A firm crimp keeps the bullet from moving under initial pressure, which allows pressure to build more uniformly in the chamber. This consistency reduces velocity variation from round to round, resulting in tighter groups.
SKU: 115775202 • Width: 3.2in • Height: 1.4in • Depth: 3.3in • Weight: 0.25oz