Lee Precisiom197557141
Lee Precision .360 Buckhammer Pacesetter Full Length Sizing 3-Die Set$35.24
Availability: In Stock
The Lee Precision 6.8 Western Pacesetter Full Length Sizing 3-Die Set is purpose-built for reloaders working up ammunition for the 6.8 Western cartridge. This three-die configuration gives you the core tools needed to resize, seat, and finish your rounds to factory specifications—making it a practical choice for hunters and precision shooters getting started with 6.8 Western reloading.
The set includes a full length sizing die to bring fired brass back to spec, an Easy Adjust Dead Length bullet seating die for repeatable, consistent seating depth, and a factory crimp die to apply a final protective crimp. Lee's straightforward design philosophy means you're getting functional tooling without unnecessary complexity—everything bolts into your press and works. The kit also comes with a universal shell holder and detailed instructions to walk you through the setup and process.
One thing to keep in mind: there is no established load data available yet for the 6.8 Western, so you'll need to source reliable load data from trusted reloading manuals or organizations before you begin. A powder dipper is not included in this set, so you'll be measuring charges with a scale. If you're already equipped with basic reloading gear and a press, this die set is the foundation for turning out clean, repeatable ammunition in this modern cartridge.
| Cartridge | 6.8 Western |
| Die Count | 3 Dies |
| Die Type | Full Length Sizing, Seating, Crimp |
| Brand | Lee Precision |
| Shell Holder | Universal Shell Holder Included |
| Powder Dipper | Not Included |
The set contains three dies: a full length sizing die, an Easy Adjust Dead Length bullet seating die, and a factory crimp die. A universal shell holder is also included.
You'll need a reloading press, a way to measure powder charges (scale or balance), and access to reliable load data for the 6.8 Western. Note that established load data for this cartridge was not available at the time of this product's release.
No. There is no established load data available for the 6.8 Western at this time. You must source load data from published reloading manuals or reputable reloading organizations before beginning.
No, a powder dipper is not included. You'll need to measure powder charges using a reloading scale or balance beam.
SKU: 197557238 • Weight: 1.16oz
Availability: In Stock
The Lee Precision 6.8 Western Pacesetter Full Length Sizing 3-Die Set is purpose-built for reloaders working up ammunition for the 6.8 Western cartridge. This three-die configuration gives you the core tools needed to resize, seat, and finish your rounds to factory specifications—making it a practical choice for hunters and precision shooters getting started with 6.8 Western reloading.
The set includes a full length sizing die to bring fired brass back to spec, an Easy Adjust Dead Length bullet seating die for repeatable, consistent seating depth, and a factory crimp die to apply a final protective crimp. Lee's straightforward design philosophy means you're getting functional tooling without unnecessary complexity—everything bolts into your press and works. The kit also comes with a universal shell holder and detailed instructions to walk you through the setup and process.
One thing to keep in mind: there is no established load data available yet for the 6.8 Western, so you'll need to source reliable load data from trusted reloading manuals or organizations before you begin. A powder dipper is not included in this set, so you'll be measuring charges with a scale. If you're already equipped with basic reloading gear and a press, this die set is the foundation for turning out clean, repeatable ammunition in this modern cartridge.
| Cartridge | 6.8 Western |
| Die Count | 3 Dies |
| Die Type | Full Length Sizing, Seating, Crimp |
| Brand | Lee Precision |
| Shell Holder | Universal Shell Holder Included |
| Powder Dipper | Not Included |
The set contains three dies: a full length sizing die, an Easy Adjust Dead Length bullet seating die, and a factory crimp die. A universal shell holder is also included.
You'll need a reloading press, a way to measure powder charges (scale or balance), and access to reliable load data for the 6.8 Western. Note that established load data for this cartridge was not available at the time of this product's release.
No. There is no established load data available for the 6.8 Western at this time. You must source load data from published reloading manuals or reputable reloading organizations before beginning.
No, a powder dipper is not included. You'll need to measure powder charges using a reloading scale or balance beam.
SKU: 197557238 • Weight: 1.16oz