Lee Precisiom121687129
Lee Double Cavity Mold .450-200gr W/handles$32.69
Availability: In Stock
The Lee Double Cavity Bullet Mold for 6.5 Creedmoor is a workhorse casting tool for handloaders who want to keep production moving without sacrificing quality. This two-cavity mold casts 140-grain bullets in the rimfire profile, letting you pour two rounds per cycle—a real time-saver when you're casting volume. If you're stepping into bullet casting or expanding an existing operation, a double-cavity mold strikes the sweet spot between speed and the precision you need for consistent, shootable ammunition.
Lee's aluminum mold blocks are engineered for the job: CNC-machined cavities deliver the roundness and dimensional consistency that separate hand-cast projectiles from mediocre ones. You're not fighting mold variation or chasing runouts—the cavities are machined tight so every bullet comes out true. Aluminum conducts heat efficiently too, which means faster cooling cycles and more pours per hour when you're really cranking.
This package ships with handles and sprue plates included, so you can start casting the same day it arrives. The two-cavity design keeps you at the bench doing what matters—casting good bullets—rather than spending the session reaming out a single-cavity block. For 6.5 Creedmoor handloaders who shoot enough to justify casting but aren't necessarily running a commercial operation, this is a solid, no-nonsense choice.
| Brand | Lee Precision |
| Product Type | Double Cavity Bullet Mold |
| Caliber/Bullet Diameter | .266" |
| Bullet Weight | 140 grains |
| Bullet Profile | Rimfire |
| Cavity Count | 2 |
| Material | Aluminum |
| Included Accessories | Handles, sprue plates |
The mold ships with handles and sprue plates already attached, so you can begin casting immediately without ordering additional parts.
A double-cavity design lets you cast two bullets per cycle, roughly doubling your production speed compared to a single-cavity mold. It's ideal for handloaders who shoot enough volume to justify casting but want to keep setup and pouring time manageable.
CNC machining ensures your mold cavities are precisely shaped and sized, which means every bullet cast is rounder and more consistent in diameter. This consistency translates to better accuracy and fewer sorting or rework steps in your reloading process.
This mold is designed for .266" bullets, which is the specification listed for this product. Always verify bore and groove dimensions for your specific rifle before ordering ammunition or casting projectiles.
SKU: 197557157 • Weight: 0.97oz
Availability: In Stock
The Lee Double Cavity Bullet Mold for 6.5 Creedmoor is a workhorse casting tool for handloaders who want to keep production moving without sacrificing quality. This two-cavity mold casts 140-grain bullets in the rimfire profile, letting you pour two rounds per cycle—a real time-saver when you're casting volume. If you're stepping into bullet casting or expanding an existing operation, a double-cavity mold strikes the sweet spot between speed and the precision you need for consistent, shootable ammunition.
Lee's aluminum mold blocks are engineered for the job: CNC-machined cavities deliver the roundness and dimensional consistency that separate hand-cast projectiles from mediocre ones. You're not fighting mold variation or chasing runouts—the cavities are machined tight so every bullet comes out true. Aluminum conducts heat efficiently too, which means faster cooling cycles and more pours per hour when you're really cranking.
This package ships with handles and sprue plates included, so you can start casting the same day it arrives. The two-cavity design keeps you at the bench doing what matters—casting good bullets—rather than spending the session reaming out a single-cavity block. For 6.5 Creedmoor handloaders who shoot enough to justify casting but aren't necessarily running a commercial operation, this is a solid, no-nonsense choice.
| Brand | Lee Precision |
| Product Type | Double Cavity Bullet Mold |
| Caliber/Bullet Diameter | .266" |
| Bullet Weight | 140 grains |
| Bullet Profile | Rimfire |
| Cavity Count | 2 |
| Material | Aluminum |
| Included Accessories | Handles, sprue plates |
The mold ships with handles and sprue plates already attached, so you can begin casting immediately without ordering additional parts.
A double-cavity design lets you cast two bullets per cycle, roughly doubling your production speed compared to a single-cavity mold. It's ideal for handloaders who shoot enough volume to justify casting but want to keep setup and pouring time manageable.
CNC machining ensures your mold cavities are precisely shaped and sized, which means every bullet cast is rounder and more consistent in diameter. This consistency translates to better accuracy and fewer sorting or rework steps in your reloading process.
This mold is designed for .266" bullets, which is the specification listed for this product. Always verify bore and groove dimensions for your specific rifle before ordering ammunition or casting projectiles.
SKU: 197557157 • Weight: 0.97oz