Lee Precisiom167521790
Lee Carbide Breech Lock Bushings 4-Die Set .38 Special/357 Mag$71.99
Loading...
Loading...
Loading...
Availability: In Stock
The Lee Carbide Breech Lock Bushings 4-Die Set for .44 Special and .44 Magnum is purpose-built for reloaders using Lee's Breech Lock quick-change press systems. If you're working with mixed range brass or shooting high-volume pistol rounds, this carbide die set handles the full sizing, expanding, seating, and crimping cycle in one efficient package. The colored quick-change bushings make it easy to swap between calibers or grab the right die at a glance—no fumbling with wrench adjustments between rounds.
Carbide dies mean less maintenance than traditional steel dies and no need for case lube on most pistol brass, which speeds up your prep work. The micrometer bullet seating die gives you precise control over load consistency, and the included factory crimp die ensures every round seats and crimps in one straightforward motion. Whether you're loading for target practice, cowboy action shooting, or hunting with a .44 Magnum, this set covers the core operations you need.
Lee includes a universal shell holder, powder dipper, and load data for both .44 Special and .44 Magnum, so you're ready to start reloading out of the box. The set also works with .445 Super Mag if you're willing to source appropriate load data from powder manufacturers. This is a no-frills, high-value setup that rewards careful technique and attention to detail—classic Lee philosophy.
| Brand | Lee Precision |
| Product Type | 4-Die Reloading Set with Breech Lock Bushings |
| Caliber | .44 Special / .44 Magnum |
| Die Material | Carbide |
| Seating Die Type | Micrometer |
| Included Components | Carbide Full Length Sizing Die, Powder Through Expanding Die, Micrometer Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper, Load Data/Instructions |
| Press Compatibility | Lee Breech Lock Quick Change presses |
Yes—this set is specifically designed for Lee presses with Breech Lock quick-change capability. The colored bushings install directly into your press's Breech Lock slot for tool-free swaps.
Yes, the dies will work with .445 Super Mag, but you'll need to obtain appropriate load data from a powder manufacturer. Lee does not provide .445 Super Mag load data with this set.
The set includes four carbide dies (full length sizer, expanding die, micrometer seating die, and factory crimp die), colored Breech Lock bushings for die identification, a universal shell holder, a powder dipper, and load data for .44 Special and .44 Magnum.
Carbide dies reduce friction significantly, so most pistol brass can be sized without lube. Check your specific load data to confirm, but the reduced prep work is one major advantage of carbide over traditional steel dies.
SKU: 167525373 • Width: 5in • Height: 1.5in • Depth: 5.75in • Weight: 1.52oz
Availability: In Stock
The Lee Carbide Breech Lock Bushings 4-Die Set for .44 Special and .44 Magnum is purpose-built for reloaders using Lee's Breech Lock quick-change press systems. If you're working with mixed range brass or shooting high-volume pistol rounds, this carbide die set handles the full sizing, expanding, seating, and crimping cycle in one efficient package. The colored quick-change bushings make it easy to swap between calibers or grab the right die at a glance—no fumbling with wrench adjustments between rounds.
Carbide dies mean less maintenance than traditional steel dies and no need for case lube on most pistol brass, which speeds up your prep work. The micrometer bullet seating die gives you precise control over load consistency, and the included factory crimp die ensures every round seats and crimps in one straightforward motion. Whether you're loading for target practice, cowboy action shooting, or hunting with a .44 Magnum, this set covers the core operations you need.
Lee includes a universal shell holder, powder dipper, and load data for both .44 Special and .44 Magnum, so you're ready to start reloading out of the box. The set also works with .445 Super Mag if you're willing to source appropriate load data from powder manufacturers. This is a no-frills, high-value setup that rewards careful technique and attention to detail—classic Lee philosophy.
| Brand | Lee Precision |
| Product Type | 4-Die Reloading Set with Breech Lock Bushings |
| Caliber | .44 Special / .44 Magnum |
| Die Material | Carbide |
| Seating Die Type | Micrometer |
| Included Components | Carbide Full Length Sizing Die, Powder Through Expanding Die, Micrometer Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper, Load Data/Instructions |
| Press Compatibility | Lee Breech Lock Quick Change presses |
Yes—this set is specifically designed for Lee presses with Breech Lock quick-change capability. The colored bushings install directly into your press's Breech Lock slot for tool-free swaps.
Yes, the dies will work with .445 Super Mag, but you'll need to obtain appropriate load data from a powder manufacturer. Lee does not provide .445 Super Mag load data with this set.
The set includes four carbide dies (full length sizer, expanding die, micrometer seating die, and factory crimp die), colored Breech Lock bushings for die identification, a universal shell holder, a powder dipper, and load data for .44 Special and .44 Magnum.
Carbide dies reduce friction significantly, so most pistol brass can be sized without lube. Check your specific load data to confirm, but the reduced prep work is one major advantage of carbide over traditional steel dies.
SKU: 167525373 • Width: 5in • Height: 1.5in • Depth: 5.75in • Weight: 1.52oz