L
Lee Precisiom115781742
Lee 90128 Case Length Gauge w|Shell Holder 2 Piece 270 Winchester $5.83
Availability: In Stock
The Lee 90136 Case Length Gauge with Shell Holder is a two-piece reloading tool set sized specifically for 30-30 Winchester cartridges. If you're handloading rifle ammunition, maintaining consistent case length is critical for both accuracy and safe chamber fit. This gauge-and-holder combo gives you a straightforward way to measure and trim your brass to spec, then square the case mouth—two essential steps that separators casual reloaders from serious ones.
The case length gauge itself lets you quickly check whether your trimmed brass falls within SAAMI specifications for the 30-30 Winchester. The matching shell holder keeps your case steady and properly positioned during trimming operations, whether you're using it with a Lee Case Trimmer or another compatible trimming setup. Working together, these tools help eliminate the guesswork and inconsistencies that can creep into batch brass prep.
Built from hardened steel, this two-piece set is engineered for the kind of precision and durability you need in reloading work. It's the kind of unglamorous but absolutely necessary equipment that separates tight, safe loads from sloppy ones. If you're serious about 30-30 Winchester ammunition—whether for hunting, range work, or competition—this set belongs on your reloading bench.
| Product Name | Lee 90136 Case Length Gauge with Shell Holder |
| Caliber | 30-30 Winchester |
| Piece Count | 2 pieces (gauge and shell holder) |
| Material | Hardened steel |
| Manufacturer | Lee Precision |
Yes—this set is specifically sized and spec'd for 30-30 Winchester cartridges. The gauge is designed to check case length against SAAMI tolerances for that caliber, and the shell holder is matched to hold 30-30 cases securely during trimming.
The shell holder is designed to work with the Lee Case Trimmer and other compatible reloading equipment. It holds the 30-30 Winchester case firmly in place during trimming and case mouth squaring operations.
This two-piece set provides the measurement gauge and case-holding components. You'll need a separate case trimmer (such as the Lee Case Trimmer) to actually trim and square the brass. The gauge and holder prepare and support your cases for that work.
Trimming ensures all your cases are uniform in length, which improves accuracy and reliability. Squaring the case mouth helps ammunition chamber consistently and safely. This consistency is especially important in rifle reloading, where even small variations in case prep can affect how rounds perform downrange.
SKU: 115737031 • Width: 2.3in • Height: 0.2in • Depth: 3in • Weight: 0.05oz
Availability: In Stock
The Lee 90136 Case Length Gauge with Shell Holder is a two-piece reloading tool set sized specifically for 30-30 Winchester cartridges. If you're handloading rifle ammunition, maintaining consistent case length is critical for both accuracy and safe chamber fit. This gauge-and-holder combo gives you a straightforward way to measure and trim your brass to spec, then square the case mouth—two essential steps that separators casual reloaders from serious ones.
The case length gauge itself lets you quickly check whether your trimmed brass falls within SAAMI specifications for the 30-30 Winchester. The matching shell holder keeps your case steady and properly positioned during trimming operations, whether you're using it with a Lee Case Trimmer or another compatible trimming setup. Working together, these tools help eliminate the guesswork and inconsistencies that can creep into batch brass prep.
Built from hardened steel, this two-piece set is engineered for the kind of precision and durability you need in reloading work. It's the kind of unglamorous but absolutely necessary equipment that separates tight, safe loads from sloppy ones. If you're serious about 30-30 Winchester ammunition—whether for hunting, range work, or competition—this set belongs on your reloading bench.
| Product Name | Lee 90136 Case Length Gauge with Shell Holder |
| Caliber | 30-30 Winchester |
| Piece Count | 2 pieces (gauge and shell holder) |
| Material | Hardened steel |
| Manufacturer | Lee Precision |
Yes—this set is specifically sized and spec'd for 30-30 Winchester cartridges. The gauge is designed to check case length against SAAMI tolerances for that caliber, and the shell holder is matched to hold 30-30 cases securely during trimming.
The shell holder is designed to work with the Lee Case Trimmer and other compatible reloading equipment. It holds the 30-30 Winchester case firmly in place during trimming and case mouth squaring operations.
This two-piece set provides the measurement gauge and case-holding components. You'll need a separate case trimmer (such as the Lee Case Trimmer) to actually trim and square the brass. The gauge and holder prepare and support your cases for that work.
Trimming ensures all your cases are uniform in length, which improves accuracy and reliability. Squaring the case mouth helps ammunition chamber consistently and safely. This consistency is especially important in rifle reloading, where even small variations in case prep can affect how rounds perform downrange.
SKU: 115737031 • Width: 2.3in • Height: 0.2in • Depth: 3in • Weight: 0.05oz