Availability: In Stock
The LaserMax LMS1131P Guide Rod Laser is a 5mW red laser sighting system built into a Glock guide rod replacement, designed for Glock 19, 23, 32, and 38 pistols in generations 1–3. If you're after faster target acquisition and a backup aiming point that doesn't require a holster change or aftermarket slide cuts, this aluminum-built laser rides in the frame where the factory spring guide sits. It's the kind of upgrade that stays put once installed and doesn't force you to rethink your gear ecosystem.
Installation is straightforward—no gunsmithing or special tools needed. The laser uses a 635nM wavelength red beam and pulses for better visibility in variable light. Because it's mounted close to the bore axis, point-of-aim/point-of-impact alignment is consistent, and the ambidextrous ON/OFF switch sits where your thumb naturally lands, reinforcing safe handling habits. The construction pairs aircraft-grade aluminum with genuine Wolff springs for durability in the frame.
This works whether you carry in a traditional holster or appendix rig—the guide rod design keeps your grip and draw uncompromised. It's the kind of sighting tool that appeals to shooters who want redundancy without reinvention: a compact, proven way to add a laser to a platform you already trust.
| Laser Output | 5mW |
| Wavelength | 635nM (red) |
| Construction Material | Aircraft-grade aluminum |
| Spring Component | Genuine Wolff spring |
| Compatibility | Glock 19, 23, 32, 38 (Gen1–Gen3) |
| Installation | User-installed; no gunsmithing required |
| Beam Function | Pulsing |
No. The LMS1131P is designed for Glock 19, 23, 32, and 38 models in generations 1–3 only. Later generations have different frame geometries and are not compatible with this guide rod laser.
No. The LMS1131P installs without gunsmithing or special tools. It replaces your factory spring guide assembly directly, and the installation process is user-friendly.
The laser is built into the guide rod assembly inside the frame, so it does not alter grip texture or external dimensions. You can continue using your existing holsters and carry method without modification.
The laser uses a pulsing function to improve visibility in variable lighting. The pulsing beam is designed for faster identification, though the visibility of any laser depends on ambient light, distance, and target surface.
SKU: 115676758 • Width: 3.9in • Height: 1.4in • Depth: 7.9in • Weight: 0.25oz
Availability: In Stock
The LaserMax LMS1131P Guide Rod Laser is a 5mW red laser sighting system built into a Glock guide rod replacement, designed for Glock 19, 23, 32, and 38 pistols in generations 1–3. If you're after faster target acquisition and a backup aiming point that doesn't require a holster change or aftermarket slide cuts, this aluminum-built laser rides in the frame where the factory spring guide sits. It's the kind of upgrade that stays put once installed and doesn't force you to rethink your gear ecosystem.
Installation is straightforward—no gunsmithing or special tools needed. The laser uses a 635nM wavelength red beam and pulses for better visibility in variable light. Because it's mounted close to the bore axis, point-of-aim/point-of-impact alignment is consistent, and the ambidextrous ON/OFF switch sits where your thumb naturally lands, reinforcing safe handling habits. The construction pairs aircraft-grade aluminum with genuine Wolff springs for durability in the frame.
This works whether you carry in a traditional holster or appendix rig—the guide rod design keeps your grip and draw uncompromised. It's the kind of sighting tool that appeals to shooters who want redundancy without reinvention: a compact, proven way to add a laser to a platform you already trust.
| Laser Output | 5mW |
| Wavelength | 635nM (red) |
| Construction Material | Aircraft-grade aluminum |
| Spring Component | Genuine Wolff spring |
| Compatibility | Glock 19, 23, 32, 38 (Gen1–Gen3) |
| Installation | User-installed; no gunsmithing required |
| Beam Function | Pulsing |
No. The LMS1131P is designed for Glock 19, 23, 32, and 38 models in generations 1–3 only. Later generations have different frame geometries and are not compatible with this guide rod laser.
No. The LMS1131P installs without gunsmithing or special tools. It replaces your factory spring guide assembly directly, and the installation process is user-friendly.
The laser is built into the guide rod assembly inside the frame, so it does not alter grip texture or external dimensions. You can continue using your existing holsters and carry method without modification.
The laser uses a pulsing function to improve visibility in variable lighting. The pulsing beam is designed for faster identification, though the visibility of any laser depends on ambient light, distance, and target surface.
SKU: 115676758 • Width: 3.9in • Height: 1.4in • Depth: 7.9in • Weight: 0.25oz