Lantac115654579
Lantac Ultimate Takedown Pin Set Tin$45.99
Availability: In Stock
If you're tired of struggling with standard AR-15 takedown pins, the Lantac Ultimate Takedown Pin Set offers a tool-free alternative designed by someone who actually uses an AR. This precision-machined pin set lets you install and remove your pivot and takedown pins without hunting for a punch or screwdriver—a genuine quality-of-life upgrade on the bench or in the field. Made in the USA from 17-4PH stainless steel in H900 condition and finished with QPQ nitride, these pins are built to handle real-world use without wearing out.
The secret is in the geometry: ramped grooves on each pin hold the detent in place during installation and rotation, while aggressive crenulation on the pin heads gives you actual purchase when your fingers are cold, wet, or gloved. The rear pin slides to a halfway position, then rotates—the detent rides the ramp and pops free. No frustration, no tools, no second-guessing. The set ships with a 3D-printed rear pin removal tool and includes KNS detents and stainless detent springs, so you're ready to go straight out of the box.
There's also a built-in safety feature called QuickSafe if you want to lock down your lower receiver: install the pivot pin through the rear takedown hole, rotate it so the detent registers with the groove, and the upper won't mount without removing the castle nut and end plate. It's a simple mechanical safety lock that doesn't require batteries or external hardware.
| Material | 17-4PH Stainless Steel, H900 Condition |
| Finish | QPQ Nitride Black |
| Pivot Pin Weight | 0.25 oz |
| Takedown Pin Weight | 0.20 oz |
| Included Components | Pivot pin, takedown pin, 3D-printed rear pin removal tool, KNS detents, stainless detent springs |
| Compatibility | AR-15 |
| Country of Origin | USA |
No. The Lantac Ultimate Takedown Pin Set is designed for tool-free installation and removal. The ramped grooves on each pin allow you to install, remove, and rotate them by hand. A 3D-printed rear pin removal tool is included, but it's optional—the pins work without it.
The set includes the pivot pin, takedown pin, a 3D-printed rear pin removal tool, KNS detents, and stainless detent springs. Everything you need to swap out your stock pins is in the box.
Yes, this set is designed for the AR-15 platform. The pins are precision-machined to standard AR-15 specifications.
QuickSafe is a built-in mechanical safety lock. By installing the pivot pin through the rear takedown hole and rotating it so the detent registers with the groove, you can prevent the upper receiver from being mounted to the lower without removing the castle nut and end plate. It's a simple way to secure your lower receiver when it's not in use.
SKU: 115708078 • Width: 3.25in • Height: 0.75in • Depth: 5.5in • Weight: 0.06oz
Availability: In Stock
If you're tired of struggling with standard AR-15 takedown pins, the Lantac Ultimate Takedown Pin Set offers a tool-free alternative designed by someone who actually uses an AR. This precision-machined pin set lets you install and remove your pivot and takedown pins without hunting for a punch or screwdriver—a genuine quality-of-life upgrade on the bench or in the field. Made in the USA from 17-4PH stainless steel in H900 condition and finished with QPQ nitride, these pins are built to handle real-world use without wearing out.
The secret is in the geometry: ramped grooves on each pin hold the detent in place during installation and rotation, while aggressive crenulation on the pin heads gives you actual purchase when your fingers are cold, wet, or gloved. The rear pin slides to a halfway position, then rotates—the detent rides the ramp and pops free. No frustration, no tools, no second-guessing. The set ships with a 3D-printed rear pin removal tool and includes KNS detents and stainless detent springs, so you're ready to go straight out of the box.
There's also a built-in safety feature called QuickSafe if you want to lock down your lower receiver: install the pivot pin through the rear takedown hole, rotate it so the detent registers with the groove, and the upper won't mount without removing the castle nut and end plate. It's a simple mechanical safety lock that doesn't require batteries or external hardware.
| Material | 17-4PH Stainless Steel, H900 Condition |
| Finish | QPQ Nitride Black |
| Pivot Pin Weight | 0.25 oz |
| Takedown Pin Weight | 0.20 oz |
| Included Components | Pivot pin, takedown pin, 3D-printed rear pin removal tool, KNS detents, stainless detent springs |
| Compatibility | AR-15 |
| Country of Origin | USA |
No. The Lantac Ultimate Takedown Pin Set is designed for tool-free installation and removal. The ramped grooves on each pin allow you to install, remove, and rotate them by hand. A 3D-printed rear pin removal tool is included, but it's optional—the pins work without it.
The set includes the pivot pin, takedown pin, a 3D-printed rear pin removal tool, KNS detents, and stainless detent springs. Everything you need to swap out your stock pins is in the box.
Yes, this set is designed for the AR-15 platform. The pins are precision-machined to standard AR-15 specifications.
QuickSafe is a built-in mechanical safety lock. By installing the pivot pin through the rear takedown hole and rotating it so the detent registers with the groove, you can prevent the upper receiver from being mounted to the lower without removing the castle nut and end plate. It's a simple way to secure your lower receiver when it's not in use.
SKU: 115708078 • Width: 3.25in • Height: 0.75in • Depth: 5.5in • Weight: 0.06oz