Lantac152828922
Lantac 7.62X39 Dead Air Keymodlantac Dragon Muzzle Brake$147.99
Availability: In Stock
The LANTAC Dragon muzzle brake for 7.62x39 AK platforms is engineered for shooters who demand measurable recoil reduction and shot-to-shot control. Threaded 14x1 LH and caliber-specific to 7.62x39, this device combines LanTac's patented gas-handling system with precision engineering to keep your rifle stable during rapid fire. Whether you're running a piston AK or tuning a converted rifle, the Dragon's recoil mitigation means faster follow-up shots and flatter shooting in tactical or hunting scenarios.
Built from 4140 gun steel and finished in black nitride for corrosion resistance, this brake is precision-machined to 48Rc hardness and serial-numbered for quality control. The design incorporates LanTac's Short Energy Pulse system, which prevents recoil energy from stacking between shots—critical when you need all rounds on target, especially in rapid-fire or full-auto applications. Weight is kept minimal at 4 ounces, so you won't notice it shifting your rifle's balance.
The brake ships with a complete timing shim set (includes four shim sizes plus a washer) for proper indexing during installation, though thread locker such as Rocksett will need to be sourced separately. The unit also features a SilencerCo ASR quick-mount interface, making it compatible with the Omega suppressor and Blast Shield if you're planning a suppressed setup. LanTac manufactures this brake in the USA, ensuring tight tolerances and consistent performance across every unit.
| Caliber | 7.62x39 |
| Thread Pattern | 14x1 LH (left-hand) |
| Material | 4140 gun steel |
| Finish | Black Nitride QPQ |
| Length | 2.570" |
| Body Diameter | 0.824" |
| Mount Diameter | 1.120" |
| Weight | 4.0 oz |
| Included Shims | Two .34mm, three .22mm, three .11mm, four .075mm, one 2mm washer |
| Quick-Mount System | SilencerCo ASR compatible |
| Country of Origin | USA |
The Dragon is threaded 14x1 LH and designed specifically for 7.62x39 caliber. Verify that your AK barrel is threaded to this specification before ordering. It is not compatible with other thread patterns or calibers.
Yes. The Dragon features a SilencerCo ASR quick-mount interface, allowing you to attach SilencerCo's Omega suppressor and Blast Shield. This makes it a versatile platform if you plan a suppressed setup. Note that it does not work with the BMD Blast Mitigation Device.
The brake comes with a complete timing shim set consisting of shims in four different thicknesses (.34mm, .22mm, .11mm, .075mm) plus a 2mm washer to help you properly index the brake on your barrel. Thread locker such as Rocksett is not included and should be purchased separately.
No. The Dragon muzzle brake is not classified as a flash hider under California law and therefore would not be considered compliant in that jurisdiction. Check your local and state regulations before purchasing.
SKU: 121688454 • Weight: 0.25oz
Availability: In Stock
The LANTAC Dragon muzzle brake for 7.62x39 AK platforms is engineered for shooters who demand measurable recoil reduction and shot-to-shot control. Threaded 14x1 LH and caliber-specific to 7.62x39, this device combines LanTac's patented gas-handling system with precision engineering to keep your rifle stable during rapid fire. Whether you're running a piston AK or tuning a converted rifle, the Dragon's recoil mitigation means faster follow-up shots and flatter shooting in tactical or hunting scenarios.
Built from 4140 gun steel and finished in black nitride for corrosion resistance, this brake is precision-machined to 48Rc hardness and serial-numbered for quality control. The design incorporates LanTac's Short Energy Pulse system, which prevents recoil energy from stacking between shots—critical when you need all rounds on target, especially in rapid-fire or full-auto applications. Weight is kept minimal at 4 ounces, so you won't notice it shifting your rifle's balance.
The brake ships with a complete timing shim set (includes four shim sizes plus a washer) for proper indexing during installation, though thread locker such as Rocksett will need to be sourced separately. The unit also features a SilencerCo ASR quick-mount interface, making it compatible with the Omega suppressor and Blast Shield if you're planning a suppressed setup. LanTac manufactures this brake in the USA, ensuring tight tolerances and consistent performance across every unit.
| Caliber | 7.62x39 |
| Thread Pattern | 14x1 LH (left-hand) |
| Material | 4140 gun steel |
| Finish | Black Nitride QPQ |
| Length | 2.570" |
| Body Diameter | 0.824" |
| Mount Diameter | 1.120" |
| Weight | 4.0 oz |
| Included Shims | Two .34mm, three .22mm, three .11mm, four .075mm, one 2mm washer |
| Quick-Mount System | SilencerCo ASR compatible |
| Country of Origin | USA |
The Dragon is threaded 14x1 LH and designed specifically for 7.62x39 caliber. Verify that your AK barrel is threaded to this specification before ordering. It is not compatible with other thread patterns or calibers.
Yes. The Dragon features a SilencerCo ASR quick-mount interface, allowing you to attach SilencerCo's Omega suppressor and Blast Shield. This makes it a versatile platform if you plan a suppressed setup. Note that it does not work with the BMD Blast Mitigation Device.
The brake comes with a complete timing shim set consisting of shims in four different thicknesses (.34mm, .22mm, .11mm, .075mm) plus a 2mm washer to help you properly index the brake on your barrel. Thread locker such as Rocksett is not included and should be purchased separately.
No. The Dragon muzzle brake is not classified as a flash hider under California law and therefore would not be considered compliant in that jurisdiction. Check your local and state regulations before purchasing.
SKU: 121688454 • Weight: 0.25oz