L.E. Wilson194197661
Wilson Die Kit with Plastic Case .308 Win$209.44
Loading...
Loading...
Loading...
Availability: In Stock
The L.E. Wilson Die Kit 2 for .308 Winchester is a complete reloading system built for shooters who demand consistency and precision in every loaded round. This stainless steel die set combines Wilson's reputation for quality with a thoughtful kit layout: a full-length bushing resizing die, a micrometer seater die, and a case-length headspace gauge. Whether you're loading match-grade ammo for long-range hunting, precision rifle competition, or general-purpose shooting, this kit gives you the tools to control every variable that affects finished-cartridge quality.
The core of the system is Wilson's bushing-type full-length sizing die, which resizes the case body while letting you dial in neck tension independently—a huge advantage if you're tuning loads for specific bullet weights or managing neck runout. The die includes an adjustable decapping rod and a spare decapping punch tip, and threads into any standard 7/8"-14 reloading press. The matching seater die features a micrometer top that allows adjustment in .001" increments, giving you fine control over seating depth. Both die and case stay in perfect alignment throughout the seating stroke. Note that the seater die is hand-operated—designed for use with a mallet or arbor press, not a conventional reloading press.
The included case-length headspace gauge is the third leg of the stool. This one-piece, non-adjustable cylinder-type tool measures case length from base to shoulder and confirms maximum case length, letting you verify that resized and finished rounds fall within SAAMI minimum and maximum dimensions for both case length and headspace. This step separates careful reloaders from those who just push through the motions.
If you already have brass and a press, this kit gets you straight to work. If you need to round out your setup, you'll want to source a powder scale, calipers, and cases separately—those items are not included.
| Caliber | .308 Winchester |
| Die Type | Full-length bushing resizing die with micrometer seater die |
| Material | Stainless steel |
| Thread Size | 7/8"-14 |
| Seater Adjustment | .001" increments |
| Included Accessories | Case-length headspace gauge, adjustable decapping rod, spare decapping punch tip |
| Case Included | Yes (plastic) |
The full-length resizing die uses standard 7/8"-14 threads and will fit most common reloading presses. However, the seater die is hand-operated and requires a mallet or arbor press—it is not designed for use in a conventional reloading press.
A bushing-type die lets you resize the case body while controlling neck tension separately. This is valuable if you're loading multiple bullet weights or working to minimize neck runout, since you can dial in the exact neck fit your specific bullet needs rather than relying on a one-size-fits-all expander ball.
The kit includes a full-length bushing resizing die with adjustable decapping rod and spare punch tip, a micrometer seater die, a case-length headspace gauge, and a plastic storage case. You will need to source your own brass, powder, primers, and bullets.
The gauge verifies that resized and finished cartridges meet SAAMI specifications for case length (base to shoulder) and maximum case length. This quality-control step ensures your loaded rounds are within safe dimensions and helps identify cases that may be worn or out of tolerance.
SKU: 167522849 • Width: 5.5in • Height: 2.25in • Depth: 8.75in • Weight: 2.3oz
Availability: In Stock
The L.E. Wilson Die Kit 2 for .308 Winchester is a complete reloading system built for shooters who demand consistency and precision in every loaded round. This stainless steel die set combines Wilson's reputation for quality with a thoughtful kit layout: a full-length bushing resizing die, a micrometer seater die, and a case-length headspace gauge. Whether you're loading match-grade ammo for long-range hunting, precision rifle competition, or general-purpose shooting, this kit gives you the tools to control every variable that affects finished-cartridge quality.
The core of the system is Wilson's bushing-type full-length sizing die, which resizes the case body while letting you dial in neck tension independently—a huge advantage if you're tuning loads for specific bullet weights or managing neck runout. The die includes an adjustable decapping rod and a spare decapping punch tip, and threads into any standard 7/8"-14 reloading press. The matching seater die features a micrometer top that allows adjustment in .001" increments, giving you fine control over seating depth. Both die and case stay in perfect alignment throughout the seating stroke. Note that the seater die is hand-operated—designed for use with a mallet or arbor press, not a conventional reloading press.
The included case-length headspace gauge is the third leg of the stool. This one-piece, non-adjustable cylinder-type tool measures case length from base to shoulder and confirms maximum case length, letting you verify that resized and finished rounds fall within SAAMI minimum and maximum dimensions for both case length and headspace. This step separates careful reloaders from those who just push through the motions.
If you already have brass and a press, this kit gets you straight to work. If you need to round out your setup, you'll want to source a powder scale, calipers, and cases separately—those items are not included.
| Caliber | .308 Winchester |
| Die Type | Full-length bushing resizing die with micrometer seater die |
| Material | Stainless steel |
| Thread Size | 7/8"-14 |
| Seater Adjustment | .001" increments |
| Included Accessories | Case-length headspace gauge, adjustable decapping rod, spare decapping punch tip |
| Case Included | Yes (plastic) |
The full-length resizing die uses standard 7/8"-14 threads and will fit most common reloading presses. However, the seater die is hand-operated and requires a mallet or arbor press—it is not designed for use in a conventional reloading press.
A bushing-type die lets you resize the case body while controlling neck tension separately. This is valuable if you're loading multiple bullet weights or working to minimize neck runout, since you can dial in the exact neck fit your specific bullet needs rather than relying on a one-size-fits-all expander ball.
The kit includes a full-length bushing resizing die with adjustable decapping rod and spare punch tip, a micrometer seater die, a case-length headspace gauge, and a plastic storage case. You will need to source your own brass, powder, primers, and bullets.
The gauge verifies that resized and finished cartridges meet SAAMI specifications for case length (base to shoulder) and maximum case length. This quality-control step ensures your loaded rounds are within safe dimensions and helps identify cases that may be worn or out of tolerance.
SKU: 167522849 • Width: 5.5in • Height: 2.25in • Depth: 8.75in • Weight: 2.3oz