L.E. Wilson194196978
L.E. Wilson 222 Remington Bullet Seating Die$79.20
Availability: In Stock
The L.E. Wilson 260 Remington bullet seating die brings benchrest-grade precision to your reloading bench. Unlike conventional seating dies, this chamber-type seater uses a capture design that controls both bullet and case alignment before seating begins, resulting in tighter runout and more consistent rounds. If you're serious about 260 Remington loads—whether for long-range hunting, precision rifle competition, or dedicated accuracy work—this die delivers the kind of control that separates good loads from great ones.
Chamber-type seating dies work differently than standard 7/8"-14 TPI designs. Your case and bullet are fully captured by the die before the close-fitting seating stem pushes the bullet straight into the case mouth. That alignment control is what makes the difference: less bullet tip runout, more uniform seating depth, and tighter shot groups. It's the reason benchrest shooters have favored this style for decades.
Built entirely from stainless steel for durability, the die includes a seater base and a precision cap screw (3/8"-24 TPI) for depth adjustment. You get fine-tuned control over seating depth without guesswork. Everything arrives in a box with an allen wrench and instruction card—ready to integrate into your reloading setup.
| Caliber | 260 Remington |
| Die Type | Chamber-type bullet seating die |
| Material | Stainless steel |
| Depth Adjustment | Cap screw, 3/8"-24 TPI |
| Included Components | Seater die, seater base, allen wrench, instruction card |
| Manufacturer | L.E. Wilson, Inc. (USA) |
A chamber-type seater fully captures both the case and bullet before seating, aligning them precisely before the stem pushes the bullet into the case. Standard 7/8"-14 TPI dies don't provide this pre-seating capture, resulting in higher runout and less consistent results. The chamber-type design is significantly more accurate.
This die is designed for use in standard reloading presses that accept the seater base. Check your press manual and the L.E. Wilson instructions to confirm compatibility with your specific setup. The seater base threads into your press die station.
You receive the seater die, seater base, an allen wrench for adjustments, and an instruction card with setup guidance—everything you need to get started.
Yes. The die includes a precision cap screw with 3/8"-24 TPI threading that lets you fine-tune seating depth for consistent cartridge dimensions and performance.
SKU: 194197070 • Weight: 0.9oz
Availability: In Stock
The L.E. Wilson 260 Remington bullet seating die brings benchrest-grade precision to your reloading bench. Unlike conventional seating dies, this chamber-type seater uses a capture design that controls both bullet and case alignment before seating begins, resulting in tighter runout and more consistent rounds. If you're serious about 260 Remington loads—whether for long-range hunting, precision rifle competition, or dedicated accuracy work—this die delivers the kind of control that separates good loads from great ones.
Chamber-type seating dies work differently than standard 7/8"-14 TPI designs. Your case and bullet are fully captured by the die before the close-fitting seating stem pushes the bullet straight into the case mouth. That alignment control is what makes the difference: less bullet tip runout, more uniform seating depth, and tighter shot groups. It's the reason benchrest shooters have favored this style for decades.
Built entirely from stainless steel for durability, the die includes a seater base and a precision cap screw (3/8"-24 TPI) for depth adjustment. You get fine-tuned control over seating depth without guesswork. Everything arrives in a box with an allen wrench and instruction card—ready to integrate into your reloading setup.
| Caliber | 260 Remington |
| Die Type | Chamber-type bullet seating die |
| Material | Stainless steel |
| Depth Adjustment | Cap screw, 3/8"-24 TPI |
| Included Components | Seater die, seater base, allen wrench, instruction card |
| Manufacturer | L.E. Wilson, Inc. (USA) |
A chamber-type seater fully captures both the case and bullet before seating, aligning them precisely before the stem pushes the bullet into the case. Standard 7/8"-14 TPI dies don't provide this pre-seating capture, resulting in higher runout and less consistent results. The chamber-type design is significantly more accurate.
This die is designed for use in standard reloading presses that accept the seater base. Check your press manual and the L.E. Wilson instructions to confirm compatibility with your specific setup. The seater base threads into your press die station.
You receive the seater die, seater base, an allen wrench for adjustments, and an instruction card with setup guidance—everything you need to get started.
Yes. The die includes a precision cap screw with 3/8"-24 TPI threading that lets you fine-tune seating depth for consistent cartridge dimensions and performance.
SKU: 194197070 • Weight: 0.9oz