L.E. Wilson197558427
L.E. Wilson 260 Remington Case Gage$38.72
Availability: In Stock
The L.E. Wilson 17 Remington case gage is a precision measuring tool built for handloaders who take brass prep seriously. Whether you're setting up full-length resizing dies or validating headspace on fired cases, this one-piece gage gives you the accuracy to avoid the most common reloading mistake: oversizing brass. Pair it with a caliper and you've got a straightforward, repeatable way to confirm your cases are ready for the press—and to catch brass that needs trimming before it becomes a problem.
Proper headspace control is the foundation of safe, consistent loads. The L.E. Wilson 17 Remington gage measures both overall length and datum-to-head distance, letting you dial in your die setup with confidence and keep case life from needlessly shortening. If you're running a progressive or single-stage press with 7/8"-14 dies, this tool belongs in your reloading bench. It's the kind of simple, durable check that separates dialed-in handloaders from guesswork.
Built from durable materials with knurled grip zones for steady handling, this gage is designed to last through thousands of cases. The compact, one-piece design means no fidgety adjustments or calibration; it's always ready to verify the dimensions that matter most.
| Brand | L.E. Wilson |
| Caliber | 17 Remington |
| Type | Case Gage (One-Piece) |
| Overall Length | 2.494" |
| Large End ID | .473" |
| Small End ID | .347" |
| Outside Diameter | .991" |
| Finish | Silver with knurled center |
| Included | Gage and instructions |
A case gage lets you quickly measure fired brass to confirm headspace and overall length. This tells you whether your brass is safe to reload and helps you set up your full-length resizing dies correctly—preventing the oversizing that shortens case life and compromises safety.
Insert a fired case into the gage and measure the distance from the head of the case to the datum line using a standard caliper. This confirms headspace. You can also use it to check overall length to determine if brass needs trimming. The gage comes with instructions for setup.
This gage is designed for use with standard 7/8"-14 press type full-length resizing dies, the most common die size for reloading presses.
The package includes the gage itself and instructions. You'll need your own caliper to take measurements.
SKU: 197558436 • Weight: 0.35oz
Availability: In Stock
The L.E. Wilson 17 Remington case gage is a precision measuring tool built for handloaders who take brass prep seriously. Whether you're setting up full-length resizing dies or validating headspace on fired cases, this one-piece gage gives you the accuracy to avoid the most common reloading mistake: oversizing brass. Pair it with a caliper and you've got a straightforward, repeatable way to confirm your cases are ready for the press—and to catch brass that needs trimming before it becomes a problem.
Proper headspace control is the foundation of safe, consistent loads. The L.E. Wilson 17 Remington gage measures both overall length and datum-to-head distance, letting you dial in your die setup with confidence and keep case life from needlessly shortening. If you're running a progressive or single-stage press with 7/8"-14 dies, this tool belongs in your reloading bench. It's the kind of simple, durable check that separates dialed-in handloaders from guesswork.
Built from durable materials with knurled grip zones for steady handling, this gage is designed to last through thousands of cases. The compact, one-piece design means no fidgety adjustments or calibration; it's always ready to verify the dimensions that matter most.
| Brand | L.E. Wilson |
| Caliber | 17 Remington |
| Type | Case Gage (One-Piece) |
| Overall Length | 2.494" |
| Large End ID | .473" |
| Small End ID | .347" |
| Outside Diameter | .991" |
| Finish | Silver with knurled center |
| Included | Gage and instructions |
A case gage lets you quickly measure fired brass to confirm headspace and overall length. This tells you whether your brass is safe to reload and helps you set up your full-length resizing dies correctly—preventing the oversizing that shortens case life and compromises safety.
Insert a fired case into the gage and measure the distance from the head of the case to the datum line using a standard caliper. This confirms headspace. You can also use it to check overall length to determine if brass needs trimming. The gage comes with instructions for setup.
This gage is designed for use with standard 7/8"-14 press type full-length resizing dies, the most common die size for reloading presses.
The package includes the gage itself and instructions. You'll need your own caliper to take measurements.
SKU: 197558436 • Weight: 0.35oz