Availability: In Stock
The Kriss USA Vector SDP Gen3 in 9mm Luger is a compact, modular platform built for shooters who want control, customization, and ergonomics in a personal protection or home defense carbine. This is the lightest iteration of the Vector family, redesigned from the ground up with a completely overhauled upper and lower housing architecture. If you've run Glock-pattern pistols or carbines, you'll feel at home immediately—the Vector SDP accepts standard full-size Glock magazines, giving you familiar manual-of-arms and ammunition compatibility across your lineup.
What sets the SDP Gen3 apart is its commitment to ambidextrous operation and configurable ergonomics. The magazine release, safety lever, and controls are all ambidextrous, meaning left- or right-handed shooters operate the gun without compromise. The new interchangeable pistol grip system (compatible with AR15/M16 grips) lets you dial in comfort and control to your hand. The M-LOK handguard and full-length Picatinny top rail provide straightforward rail real estate for optics, lights, and accessories, while the rear Picatinny rail accepts your choice of stabilizing brace or stock. The 5.5-inch barrel is threaded 1/2×28 RH, opening the door to suppressors or flash hiders, and finished in hard black nitride for corrosion resistance.
The action is a closed-bolt delayed blowback system—smooth, reliable, and softer shooting than straight blowback 9mm guns. Field stripping is tool-less via a 4-pin design, and the short charging handle with brass-check function keeps the gun running clean. You get a skeletonized trigger with minimal pre-travel, an ambidextrous short-throw safety, and a low-profile Gen3 upper that doesn't interfere with sight lines. Out of the box, you'll receive one 40-round magazine, a cleaning kit, cable lock, user manual, and warranty documentation.
| Caliber | 9mm Luger (9×19) |
| Action | Semi-Automatic, Closed-Bolt Delayed Blowback |
| Barrel Length | 5.5 inches (139.7 mm) |
| Barrel Material & Finish | 4140 Chrome Moly, Black Nitride (QPQ) |
| Barrel Threading | 1/2×28 RH |
| Overall Length (Collapsed) | 15.35 inches (390 mm) |
| Weight | 5.6 lbs (2.5 kg) |
| Magazine Capacity | 40 rounds (Glock-compatible) |
| Grip | Black Polymer, Interchangeable AR15/M16 Pattern |
| Safety | Ambidextrous Short-Throw Lever |
| Trigger | Skeletonized Single-Stage Pivoting, 0.7 mm Pre-Travel |
| Rails & Attachments | Full-Length Picatinny Top Rail, M-LOK Handguard, Rear Picatinny Rail for Stock/Brace |
| Charging Handle | Short Form with Brass-Check Function |
| Field Stripping | Tool-Less 4-Pin Disassembly |
Yes. The Vector SDP Gen3 is designed to accept full-size Glock-pattern magazines. One 40-round Glock-compatible magazine is included with the firearm, and standard Glock mags will function seamlessly in the gun.
Yes. The 5.5-inch barrel is threaded 1/2×28 RH, so it will accept any standard suppressor or muzzle device with compatible threading. You'll need to source a suppressor separately—none is included.
Yes. The safety lever, magazine release, bolt release, and all major controls are ambidextrous, making it equally suitable for left- and right-handed shooters without modification.
The firearm comes with one 40-round Glock-pattern magazine, a cleaning kit, cable lock, user manual, and warranty card.
Yes. The Vector SDP Gen3 features an interchangeable grip system compatible with AR15/M16 pistol grips, so you can customize fit and ergonomics to your preference.
SKU: 198467320 • Weight: 11oz
Availability: In Stock
The Kriss USA Vector SDP Gen3 in 9mm Luger is a compact, modular platform built for shooters who want control, customization, and ergonomics in a personal protection or home defense carbine. This is the lightest iteration of the Vector family, redesigned from the ground up with a completely overhauled upper and lower housing architecture. If you've run Glock-pattern pistols or carbines, you'll feel at home immediately—the Vector SDP accepts standard full-size Glock magazines, giving you familiar manual-of-arms and ammunition compatibility across your lineup.
What sets the SDP Gen3 apart is its commitment to ambidextrous operation and configurable ergonomics. The magazine release, safety lever, and controls are all ambidextrous, meaning left- or right-handed shooters operate the gun without compromise. The new interchangeable pistol grip system (compatible with AR15/M16 grips) lets you dial in comfort and control to your hand. The M-LOK handguard and full-length Picatinny top rail provide straightforward rail real estate for optics, lights, and accessories, while the rear Picatinny rail accepts your choice of stabilizing brace or stock. The 5.5-inch barrel is threaded 1/2×28 RH, opening the door to suppressors or flash hiders, and finished in hard black nitride for corrosion resistance.
The action is a closed-bolt delayed blowback system—smooth, reliable, and softer shooting than straight blowback 9mm guns. Field stripping is tool-less via a 4-pin design, and the short charging handle with brass-check function keeps the gun running clean. You get a skeletonized trigger with minimal pre-travel, an ambidextrous short-throw safety, and a low-profile Gen3 upper that doesn't interfere with sight lines. Out of the box, you'll receive one 40-round magazine, a cleaning kit, cable lock, user manual, and warranty documentation.
| Caliber | 9mm Luger (9×19) |
| Action | Semi-Automatic, Closed-Bolt Delayed Blowback |
| Barrel Length | 5.5 inches (139.7 mm) |
| Barrel Material & Finish | 4140 Chrome Moly, Black Nitride (QPQ) |
| Barrel Threading | 1/2×28 RH |
| Overall Length (Collapsed) | 15.35 inches (390 mm) |
| Weight | 5.6 lbs (2.5 kg) |
| Magazine Capacity | 40 rounds (Glock-compatible) |
| Grip | Black Polymer, Interchangeable AR15/M16 Pattern |
| Safety | Ambidextrous Short-Throw Lever |
| Trigger | Skeletonized Single-Stage Pivoting, 0.7 mm Pre-Travel |
| Rails & Attachments | Full-Length Picatinny Top Rail, M-LOK Handguard, Rear Picatinny Rail for Stock/Brace |
| Charging Handle | Short Form with Brass-Check Function |
| Field Stripping | Tool-Less 4-Pin Disassembly |
Yes. The Vector SDP Gen3 is designed to accept full-size Glock-pattern magazines. One 40-round Glock-compatible magazine is included with the firearm, and standard Glock mags will function seamlessly in the gun.
Yes. The 5.5-inch barrel is threaded 1/2×28 RH, so it will accept any standard suppressor or muzzle device with compatible threading. You'll need to source a suppressor separately—none is included.
Yes. The safety lever, magazine release, bolt release, and all major controls are ambidextrous, making it equally suitable for left- and right-handed shooters without modification.
The firearm comes with one 40-round Glock-pattern magazine, a cleaning kit, cable lock, user manual, and warranty card.
Yes. The Vector SDP Gen3 features an interchangeable grip system compatible with AR15/M16 pistol grips, so you can customize fit and ergonomics to your preference.
SKU: 198467320 • Weight: 11oz