Kriss USA115847799
KRISS USA 10MM Magazine Extension +18 Rounds FDE for Kriss VECTOR - 3 Pack (KVA-MX2K10FD01)$85.99
Availability: In Stock
The KRISS USA MagEx2 extension system transforms your factory Glock magazines into high-capacity feeders purpose-built for the KRISS Vector and compatible platforms. This 10mm extension kit adds 18 rounds to a standard Glock 20 magazine, bringing total capacity to 33 rounds—a significant boost for shooters who want more trigger time between reloads. Whether you're running a KRISS Vector, Glock 20, Glock 40, or any Glock-compatible PCC, this caliber-specific kit is engineered to maintain the reliability and ergonomics your platform demands.
The MagEx2 system consists of three components: an extended baseplate, outer sleeve, and lengthened spring—all built from durable, lightweight reinforced composite materials. This construction keeps weight minimal while withstanding the rigors of regular use. By pairing the extension with your existing Glock magazine body and follower, you get a proven feeding geometry and a look that integrates seamlessly with your gun, not an aftermarket compromise that sticks out awkwardly.
Compatibility matters when you're betting on a magazine in the field or at the range. This kit is designed specifically for 10mm and works with standard-capacity Glock 20 magazines—verify your magazine model before ordering. The reinforced composite materials resist wear and corrosion, and the design has been refined for the KRISS platform, where reliable feeding under recoil is non-negotiable. If you shoot a KRISS Vector in 10mm or rely on a Glock 20 for hunting or defensive use, the extra rounds in the mag mean fewer stops to top off.
| Brand | KRISS USA |
| Model | KVA-MX2K10BL01 |
| Caliber | 10mm |
| Capacity Increase | +18 rounds |
| Total Capacity | 33 rounds (with standard Glock 20 magazine) |
| Compatible With | Glock 20, Glock 40, KRISS Vector, Glock-compatible PCC platforms |
| Materials | Reinforced composite (baseplate, sleeve, spring) |
| What's Included | Extended baseplate, outer sleeve, extended spring |
Yes. The MagEx2 10mm extension is designed for standard-capacity Glock 20 and Glock 40 magazines. Verify that you have a factory Glock magazine in the correct caliber before purchasing, as this kit is caliber-specific.
Absolutely. The MagEx2 kit was engineered with the KRISS Vector in mind, and this 10mm version brings your magazine capacity to 33 rounds for extended shooting sessions without mag changes.
The MagEx2 system includes three components: an extended baseplate, an outer sleeve, and an extended spring. You supply the factory Glock magazine body and follower.
No. By keeping the original Glock magazine body and follower and upgrading only the baseplate, spring, and sleeve, the MagEx2 maintains the proven feeding geometry of your magazine while simply adding capacity.
SKU: 121688301 • Width: 6in • Height: 2in • Depth: 17.5in • Weight: 0.88oz
Availability: In Stock
The KRISS USA MagEx2 extension system transforms your factory Glock magazines into high-capacity feeders purpose-built for the KRISS Vector and compatible platforms. This 10mm extension kit adds 18 rounds to a standard Glock 20 magazine, bringing total capacity to 33 rounds—a significant boost for shooters who want more trigger time between reloads. Whether you're running a KRISS Vector, Glock 20, Glock 40, or any Glock-compatible PCC, this caliber-specific kit is engineered to maintain the reliability and ergonomics your platform demands.
The MagEx2 system consists of three components: an extended baseplate, outer sleeve, and lengthened spring—all built from durable, lightweight reinforced composite materials. This construction keeps weight minimal while withstanding the rigors of regular use. By pairing the extension with your existing Glock magazine body and follower, you get a proven feeding geometry and a look that integrates seamlessly with your gun, not an aftermarket compromise that sticks out awkwardly.
Compatibility matters when you're betting on a magazine in the field or at the range. This kit is designed specifically for 10mm and works with standard-capacity Glock 20 magazines—verify your magazine model before ordering. The reinforced composite materials resist wear and corrosion, and the design has been refined for the KRISS platform, where reliable feeding under recoil is non-negotiable. If you shoot a KRISS Vector in 10mm or rely on a Glock 20 for hunting or defensive use, the extra rounds in the mag mean fewer stops to top off.
| Brand | KRISS USA |
| Model | KVA-MX2K10BL01 |
| Caliber | 10mm |
| Capacity Increase | +18 rounds |
| Total Capacity | 33 rounds (with standard Glock 20 magazine) |
| Compatible With | Glock 20, Glock 40, KRISS Vector, Glock-compatible PCC platforms |
| Materials | Reinforced composite (baseplate, sleeve, spring) |
| What's Included | Extended baseplate, outer sleeve, extended spring |
Yes. The MagEx2 10mm extension is designed for standard-capacity Glock 20 and Glock 40 magazines. Verify that you have a factory Glock magazine in the correct caliber before purchasing, as this kit is caliber-specific.
Absolutely. The MagEx2 kit was engineered with the KRISS Vector in mind, and this 10mm version brings your magazine capacity to 33 rounds for extended shooting sessions without mag changes.
The MagEx2 system includes three components: an extended baseplate, an outer sleeve, and an extended spring. You supply the factory Glock magazine body and follower.
No. By keeping the original Glock magazine body and follower and upgrading only the baseplate, spring, and sleeve, the MagEx2 maintains the proven feeding geometry of your magazine while simply adding capacity.
SKU: 121688301 • Width: 6in • Height: 2in • Depth: 17.5in • Weight: 0.88oz