Kidd Innovative Design197557261
Kidd Innovative Design Guide Rod & Recoil Spring Assembly Ruger 10/22 Black Viton$69.76
Availability: In Stock
Current Stock: Out of stock
The Kidd Innovative Design Guide Rod & Recoil Spring Assembly for Ruger 10/22 with silver finish and Viton cushion is a precision upgrade that transforms how your rifle cycles. This isn't just a bolt handle swap—it's a complete system that gives you a longer, more ergonomic grip point, a match-grade guide rod machined to exacting tolerances, and the ability to dial in your action's recoil characteristics without permanent modifications. If you run your 10/22 hard—whether for tactical rimfire, small-game hunting, or serious plinking—this assembly puts control back in your hands.
The silver handle with black Viton cushion weighs 0.6 oz and stretches 1¾ inches long, a full quarter-inch longer than the factory bolt handle. That extra length gives your knuckles real breathing room when racking the bolt, especially under gloves or when you're working the rifle quickly. The guide rod is precision-ground from hardened tool steel, held to 2/10,000-inch tolerance, then nitride-treated to a 70C Rockwell surface hardness—harder than a file and guaranteed smooth. Racking the bolt should feel effortless; Kidd's rod delivers exactly that.
What sets this assembly apart is the three interchangeable tuning springs. The white spring is standard tension and works across most ammunition velocities. Red increases tension by 10 percent; grey reduces it by 10 percent. If your 10/22 develops a short-stroke hiccup or you just want to fine-tune cycling with a particular load, you swap springs in minutes—no more cutting coils and hoping for the best. Installation requires removing the stock, trigger, and bolt stop to clear the ejection port, then the assembly slides in from the top. Kidd includes everything: bolt handle, guide rod, and all three springs.
This is a genuine performance upgrade for shooters who demand reliability and precision from their rimfire. Whether you're building a dedicated 10/22 platform or refreshing an aging rifle, the Kidd system pays dividends in smoother operation and genuine tuning capability.
| Brand | Kidd Innovative Design |
| Firearm Compatibility | Ruger 10/22 |
| Handle Finish | Silver |
| Cushion Material | Black Viton |
| Handle Length | 1¾ inches |
| Handle Weight | 0.6 oz |
| Guide Rod Material | Hardened tool steel |
| Guide Rod Tolerance | 2/10,000 inch |
| Guide Rod Surface Hardness | 70C Rockwell (nitride-treated) |
| Included Springs | Three tuning springs (white/standard, red/+10%, grey/−10%) |
| What's Included | Bolt handle, guide rod, three tuning springs |
Yes, this assembly is designed specifically for the Ruger 10/22. Installation involves removing the stock, trigger, and bolt stop to access the ejection port, then the assembly slides in from the top.
The three springs allow you to adjust recoil and cycling characteristics without permanent modifications. White is standard tension and works across most ammunition velocities. Red increases tension by 10 percent for heavier loads or tighter cycling; grey decreases tension by 10 percent for lighter loads or looser cycling. If your rifle develops short-stroking or you want to optimize for a specific ammunition type, you swap springs rather than cutting coils.
The silver Kidd handle is 1¾ inches long, which is ¼ inch longer than the factory Ruger 10/22 bolt handle. That extra length gives your knuckles more clearance when racking the bolt, especially if you're wearing gloves or working the rifle quickly.
The assembly includes the silver bolt handle with black Viton cushion, the precision-ground hardened steel guide rod, and all three tuning springs (white standard, red +10%, and grey −10%).
SKU: 197557299 • Weight: 0.1oz
Availability: In Stock
Current Stock: Out of stock
The Kidd Innovative Design Guide Rod & Recoil Spring Assembly for Ruger 10/22 with silver finish and Viton cushion is a precision upgrade that transforms how your rifle cycles. This isn't just a bolt handle swap—it's a complete system that gives you a longer, more ergonomic grip point, a match-grade guide rod machined to exacting tolerances, and the ability to dial in your action's recoil characteristics without permanent modifications. If you run your 10/22 hard—whether for tactical rimfire, small-game hunting, or serious plinking—this assembly puts control back in your hands.
The silver handle with black Viton cushion weighs 0.6 oz and stretches 1¾ inches long, a full quarter-inch longer than the factory bolt handle. That extra length gives your knuckles real breathing room when racking the bolt, especially under gloves or when you're working the rifle quickly. The guide rod is precision-ground from hardened tool steel, held to 2/10,000-inch tolerance, then nitride-treated to a 70C Rockwell surface hardness—harder than a file and guaranteed smooth. Racking the bolt should feel effortless; Kidd's rod delivers exactly that.
What sets this assembly apart is the three interchangeable tuning springs. The white spring is standard tension and works across most ammunition velocities. Red increases tension by 10 percent; grey reduces it by 10 percent. If your 10/22 develops a short-stroke hiccup or you just want to fine-tune cycling with a particular load, you swap springs in minutes—no more cutting coils and hoping for the best. Installation requires removing the stock, trigger, and bolt stop to clear the ejection port, then the assembly slides in from the top. Kidd includes everything: bolt handle, guide rod, and all three springs.
This is a genuine performance upgrade for shooters who demand reliability and precision from their rimfire. Whether you're building a dedicated 10/22 platform or refreshing an aging rifle, the Kidd system pays dividends in smoother operation and genuine tuning capability.
| Brand | Kidd Innovative Design |
| Firearm Compatibility | Ruger 10/22 |
| Handle Finish | Silver |
| Cushion Material | Black Viton |
| Handle Length | 1¾ inches |
| Handle Weight | 0.6 oz |
| Guide Rod Material | Hardened tool steel |
| Guide Rod Tolerance | 2/10,000 inch |
| Guide Rod Surface Hardness | 70C Rockwell (nitride-treated) |
| Included Springs | Three tuning springs (white/standard, red/+10%, grey/−10%) |
| What's Included | Bolt handle, guide rod, three tuning springs |
Yes, this assembly is designed specifically for the Ruger 10/22. Installation involves removing the stock, trigger, and bolt stop to access the ejection port, then the assembly slides in from the top.
The three springs allow you to adjust recoil and cycling characteristics without permanent modifications. White is standard tension and works across most ammunition velocities. Red increases tension by 10 percent for heavier loads or tighter cycling; grey decreases tension by 10 percent for lighter loads or looser cycling. If your rifle develops short-stroking or you want to optimize for a specific ammunition type, you swap springs rather than cutting coils.
The silver Kidd handle is 1¾ inches long, which is ¼ inch longer than the factory Ruger 10/22 bolt handle. That extra length gives your knuckles more clearance when racking the bolt, especially if you're wearing gloves or working the rifle quickly.
The assembly includes the silver bolt handle with black Viton cushion, the precision-ground hardened steel guide rod, and all three tuning springs (white standard, red +10%, and grey −10%).
SKU: 197557299 • Weight: 0.1oz