Kak Industry167516230
Kak Ar15 Bcg M16 556 K-Spec Fde De$215.96
Availability: In Stock
The Kak Industry AR15 BCG M16 5.56 K-Spec NP3 is a lightweight bolt carrier group engineered for mid-length and rifle-length gas systems on your AR platform. This isn't a duty-grade component built for extreme abuse—it's a performance-oriented consumable part designed for shooters who maintain their rifle's gas and buffer tuning. The NP3 coating on the carrier and cam pin delivers smooth operation and easier cleaning between range sessions or hunting trips, while the dual-ejector 9310 bolt ensures reliable case ejection across 5.56 NATO and .223 Remington loads.
The aluminum carrier sports a satin gold anodize finish that matches Mil-Spec buffer tube colors, giving your build a cohesive look. Because this is a lower-mass BCG, it benefits most from a gas system properly tuned to your barrel length and ammunition—whether you're running mid-length, rifle-length, or a comparable setup. Pair it with a quality adjustable gas block and appropriately weighted buffer, and you'll get crisp bolt closure and predictable reliability without unnecessary carrier tilt or accelerated wear.
If you're assembling a precision 5.56 upper, upgrading from a milspec carrier, or building a lightweight rifle where every ounce counts, this Kak BCG offers a smart middle ground: superior coating and ergonomic bolt design without the expense of a full-race component. Just remember that consistent maintenance and proper gas tuning are your responsibility—this part rewards an informed builder.
| Brand | Kak Industry |
| Caliber | 5.56 NATO / .223 Remington (M16 profile) |
| Bolt Material | 9310 steel (dual ejector) |
| Carrier Material | Aluminum |
| Carrier Finish | Satin Gold Anodize (Mil-Spec) |
| Cam Pin Coating | NP3 |
| Type | Low-mass bolt carrier group |
| Recommended Gas Systems | Mid-length, Rifle-length, or similar |
Yes, the Kak K-Spec is a standard M16 profile bolt carrier group compatible with any AR-15 or M16 upper receiver. For best results, pair it with a mid-length or rifle-length gas system tuned to your specific barrel and ammunition.
NP3 is a nickel-PTFE composite plating that reduces friction and makes the bolt and cam pin easier to clean and maintain. It also resists corrosion better than bare steel, which helps if you're shooting in wet or salt-air conditions.
No. This is a consumable-grade BCG optimized for standard shooting and hunting. It's not rated for extreme duty cycles or military-grade reliability testing. Proper gas tuning and regular maintenance will extend its service life significantly.
Because this is a low-mass carrier, you'll want to ensure your buffer system is tuned to your gas tube length and barrel profile. Consult the gas block manufacturer's recommendations and your load data to avoid over or undergassing.
SKU: 152744764 • Width: 1.5in • Height: 1.5in • Depth: 8in • Weight: 0.5oz
Availability: In Stock
The Kak Industry AR15 BCG M16 5.56 K-Spec NP3 is a lightweight bolt carrier group engineered for mid-length and rifle-length gas systems on your AR platform. This isn't a duty-grade component built for extreme abuse—it's a performance-oriented consumable part designed for shooters who maintain their rifle's gas and buffer tuning. The NP3 coating on the carrier and cam pin delivers smooth operation and easier cleaning between range sessions or hunting trips, while the dual-ejector 9310 bolt ensures reliable case ejection across 5.56 NATO and .223 Remington loads.
The aluminum carrier sports a satin gold anodize finish that matches Mil-Spec buffer tube colors, giving your build a cohesive look. Because this is a lower-mass BCG, it benefits most from a gas system properly tuned to your barrel length and ammunition—whether you're running mid-length, rifle-length, or a comparable setup. Pair it with a quality adjustable gas block and appropriately weighted buffer, and you'll get crisp bolt closure and predictable reliability without unnecessary carrier tilt or accelerated wear.
If you're assembling a precision 5.56 upper, upgrading from a milspec carrier, or building a lightweight rifle where every ounce counts, this Kak BCG offers a smart middle ground: superior coating and ergonomic bolt design without the expense of a full-race component. Just remember that consistent maintenance and proper gas tuning are your responsibility—this part rewards an informed builder.
| Brand | Kak Industry |
| Caliber | 5.56 NATO / .223 Remington (M16 profile) |
| Bolt Material | 9310 steel (dual ejector) |
| Carrier Material | Aluminum |
| Carrier Finish | Satin Gold Anodize (Mil-Spec) |
| Cam Pin Coating | NP3 |
| Type | Low-mass bolt carrier group |
| Recommended Gas Systems | Mid-length, Rifle-length, or similar |
Yes, the Kak K-Spec is a standard M16 profile bolt carrier group compatible with any AR-15 or M16 upper receiver. For best results, pair it with a mid-length or rifle-length gas system tuned to your specific barrel and ammunition.
NP3 is a nickel-PTFE composite plating that reduces friction and makes the bolt and cam pin easier to clean and maintain. It also resists corrosion better than bare steel, which helps if you're shooting in wet or salt-air conditions.
No. This is a consumable-grade BCG optimized for standard shooting and hunting. It's not rated for extreme duty cycles or military-grade reliability testing. Proper gas tuning and regular maintenance will extend its service life significantly.
Because this is a low-mass carrier, you'll want to ensure your buffer system is tuned to your gas tube length and barrel profile. Consult the gas block manufacturer's recommendations and your load data to avoid over or undergassing.
SKU: 152744764 • Width: 1.5in • Height: 1.5in • Depth: 8in • Weight: 0.5oz