K
Availability: In Stock
The Ka-Bar 1214 Fighting/Utility Knife is a purpose-built fixed blade that handles the jobs where a general-purpose knife falls short. With a 7-inch blade combining a straight edge and partial serration, it cuts through rope, webbing, and synthetic materials that would bind up a smooth edge—ideal for tactical work, utility tasks, camp chores, and field dressing. The clip-point profile gives you precision and control without sacrificing reach, and the flat-ground 1095 Cro-Van steel holds an edge worth maintaining while staying affordable enough to use hard without losing sleep over scuffs.
Built in the USA with a full tang and backed by Ka-Bar's reputation for reliability in the field, this knife won't let you down when conditions get rough. The handle is molded Kraton G—a material that grips just as well wet or cold as it does dry—and the guard and butt cap are commercial-grade carbon steel. At 0.7 lb with an overall length of just under 12 inches, it balances weight and reach for extended carry and use.
The included hard plastic sheath is MOLLE-compatible, so you can integrate it into plate carriers, chest rigs, or pack systems without fumbling. Whether you're prepping for the field, building out a survival kit, or just need a knife that does its job without fuss, the 1214 delivers.
| Blade Length | 7 inches |
| Overall Length | 11.875 inches |
| Blade Material | 1095 Cro-Van |
| Blade Thickness | 0.165 inches |
| Blade Width | 1.188 inches |
| Blade Grind | Flat |
| Edge Configuration | Partially serrated |
| Edge Angle | 20 degrees |
| Handle Material | Kraton G |
| Guard / Butt Cap | 12GA commercial-grade carbon steel |
| Rockwell Hardness | 56–58 HRC |
| Weight | 0.7 lb |
| Sheath | Hard plastic, MOLLE-compatible |
| Country of Origin | USA (blade); Taiwan (sheath) |
Yes. The partial serration and 7-inch blade make it excellent for cutting cordage and utility materials in the field, and the Kraton G handle performs reliably in wet or cold conditions. The 1095 Cro-Van steel is tough and can be field-sharpened. It's a solid choice for camping, hiking, and backcountry work.
Absolutely. The included sheath is MOLLE-compatible, so you can mount it directly to any MOLLE webbing on your gear system.
The Ka-Bar 1214 comes with a hard plastic MOLLE-compatible sheath. The knife is made in the USA; the sheath is made in Taiwan.
The 1095 Cro-Van blade is hardened to 56–58 Rockwell hardness, which means it holds an edge well and remains maintainable in the field with a standard sharpening stone or steel. You won't need specialized equipment to keep it sharp.
SKU: 115860200 • Weight: 1.25oz
Availability: In Stock
The Ka-Bar 1214 Fighting/Utility Knife is a purpose-built fixed blade that handles the jobs where a general-purpose knife falls short. With a 7-inch blade combining a straight edge and partial serration, it cuts through rope, webbing, and synthetic materials that would bind up a smooth edge—ideal for tactical work, utility tasks, camp chores, and field dressing. The clip-point profile gives you precision and control without sacrificing reach, and the flat-ground 1095 Cro-Van steel holds an edge worth maintaining while staying affordable enough to use hard without losing sleep over scuffs.
Built in the USA with a full tang and backed by Ka-Bar's reputation for reliability in the field, this knife won't let you down when conditions get rough. The handle is molded Kraton G—a material that grips just as well wet or cold as it does dry—and the guard and butt cap are commercial-grade carbon steel. At 0.7 lb with an overall length of just under 12 inches, it balances weight and reach for extended carry and use.
The included hard plastic sheath is MOLLE-compatible, so you can integrate it into plate carriers, chest rigs, or pack systems without fumbling. Whether you're prepping for the field, building out a survival kit, or just need a knife that does its job without fuss, the 1214 delivers.
| Blade Length | 7 inches |
| Overall Length | 11.875 inches |
| Blade Material | 1095 Cro-Van |
| Blade Thickness | 0.165 inches |
| Blade Width | 1.188 inches |
| Blade Grind | Flat |
| Edge Configuration | Partially serrated |
| Edge Angle | 20 degrees |
| Handle Material | Kraton G |
| Guard / Butt Cap | 12GA commercial-grade carbon steel |
| Rockwell Hardness | 56–58 HRC |
| Weight | 0.7 lb |
| Sheath | Hard plastic, MOLLE-compatible |
| Country of Origin | USA (blade); Taiwan (sheath) |
Yes. The partial serration and 7-inch blade make it excellent for cutting cordage and utility materials in the field, and the Kraton G handle performs reliably in wet or cold conditions. The 1095 Cro-Van steel is tough and can be field-sharpened. It's a solid choice for camping, hiking, and backcountry work.
Absolutely. The included sheath is MOLLE-compatible, so you can mount it directly to any MOLLE webbing on your gear system.
The Ka-Bar 1214 comes with a hard plastic MOLLE-compatible sheath. The knife is made in the USA; the sheath is made in Taiwan.
The 1095 Cro-Van blade is hardened to 56–58 Rockwell hardness, which means it holds an edge well and remains maintainable in the field with a standard sharpening stone or steel. You won't need specialized equipment to keep it sharp.
SKU: 115860200 • Weight: 1.25oz
