JTS Group145480573
Jts Ss41026 410Ga 26 Single Shot Adult Wood$189.99
Availability: In Stock
Current Stock: Out of stock
The JTS SS41026 is a no-frills .410-gauge break-action shotgun built for shooters who value simplicity and reliability over complexity. This single-shot design strips away the unnecessary—you get a straightforward, hammer-fired action that's easy to maintain and quick to reload between shots. The 26-inch barrel and synthetic stock make it light enough to carry all day, whether you're hunting small game, working around the homestead, or introducing a shooter to shotgun fundamentals. The blued steel receiver wears its working finish without apology.
Out of the box, the SS41026 ships with a Rem-choke Extra Full constriction already threaded into the muzzle, giving you a solid starting point for tighter patterns. The receiver is drilled and tapped for a Weaver 82 rail, so mounting optics or a red dot is straightforward if you want them. The 3-inch chamber handles both 2.75-inch and 3-inch .410 loads, giving you flexibility at the reloading bench or the ammo shelf. A few minutes with a cleaning rod and you're done—no gas tubes, no complex triggers, no surprises.
This is the gun for the hunter who doesn't need magazine capacity or tactical styling, the reloader experimenting with .410 loads, or the shooter building a collection of useful, unpretentious tools. It's honest, functional, and priced to work.
| Gauge | .410 |
| Action | Break-action, single shot |
| Barrel Length | 26 inches |
| Chamber | 3 inches |
| Stock Material | Synthetic |
| Finish | Blued steel |
| Choke System | Rem-choke threaded (Extra Full included) |
| Rail | Weaver 82 compatible receiver mounting |
| Firing Mechanism | Hammer-fired |
| Ejector | Yes |
The SS41026 uses Rem-choke threading and ships with an Extra Full choke already installed. Any standard Rem-choke constriction will work, so you can swap between Full, Modified, Improved Cylinder, and others depending on your load and target.
Yes. The receiver is drilled and tapped for a Weaver 82 rail, which will accept most standard low-profile optics or scout-style mounts. Installation is straightforward and requires no gunsmithing.
The SS41026 has a 3-inch chamber, so it safely fires both 2.75-inch and 3-inch .410-gauge shotshell ammunition. Always verify ammo specification before loading.
The lightweight synthetic stock and simple break-action design make this a practical choice for introducing new shooters to shotgun fundamentals. Recoil will depend on the specific loads used, so always select appropriate ammunition for the shooter.
SKU: 145479293 • Width: 7.65in • Height: 2.4in • Depth: 45.1in • Weight: 7.75oz
Availability: In Stock
Current Stock: Out of stock
The JTS SS41026 is a no-frills .410-gauge break-action shotgun built for shooters who value simplicity and reliability over complexity. This single-shot design strips away the unnecessary—you get a straightforward, hammer-fired action that's easy to maintain and quick to reload between shots. The 26-inch barrel and synthetic stock make it light enough to carry all day, whether you're hunting small game, working around the homestead, or introducing a shooter to shotgun fundamentals. The blued steel receiver wears its working finish without apology.
Out of the box, the SS41026 ships with a Rem-choke Extra Full constriction already threaded into the muzzle, giving you a solid starting point for tighter patterns. The receiver is drilled and tapped for a Weaver 82 rail, so mounting optics or a red dot is straightforward if you want them. The 3-inch chamber handles both 2.75-inch and 3-inch .410 loads, giving you flexibility at the reloading bench or the ammo shelf. A few minutes with a cleaning rod and you're done—no gas tubes, no complex triggers, no surprises.
This is the gun for the hunter who doesn't need magazine capacity or tactical styling, the reloader experimenting with .410 loads, or the shooter building a collection of useful, unpretentious tools. It's honest, functional, and priced to work.
| Gauge | .410 |
| Action | Break-action, single shot |
| Barrel Length | 26 inches |
| Chamber | 3 inches |
| Stock Material | Synthetic |
| Finish | Blued steel |
| Choke System | Rem-choke threaded (Extra Full included) |
| Rail | Weaver 82 compatible receiver mounting |
| Firing Mechanism | Hammer-fired |
| Ejector | Yes |
The SS41026 uses Rem-choke threading and ships with an Extra Full choke already installed. Any standard Rem-choke constriction will work, so you can swap between Full, Modified, Improved Cylinder, and others depending on your load and target.
Yes. The receiver is drilled and tapped for a Weaver 82 rail, which will accept most standard low-profile optics or scout-style mounts. Installation is straightforward and requires no gunsmithing.
The SS41026 has a 3-inch chamber, so it safely fires both 2.75-inch and 3-inch .410-gauge shotshell ammunition. Always verify ammo specification before loading.
The lightweight synthetic stock and simple break-action design make this a practical choice for introducing new shooters to shotgun fundamentals. Recoil will depend on the specific loads used, so always select appropriate ammunition for the shooter.
SKU: 145479293 • Width: 7.65in • Height: 2.4in • Depth: 45.1in • Weight: 7.75oz