$149.97
Availability: In Stock
The Inforce WML White Gen 3 FDE tactical weapon light is a rail-mounted light built for shooters who need serious illumination on pistols, carbines, and rifles. This generation delivers 450 lumens with 10,000 candelas of beam intensity—more than double the original WML—on a single CR123a battery while maintaining the same 1.5-hour runtime. Whether you're working close quarters with a shotgun or reaching out on a rifle, the 656-foot (200-meter) beam range gives you the light throw to match your setup.
Built tough for field use, the WML Gen 3 uses glass-reinforced nylon construction that shrugs off dirt, sand, and rough handling. The housing is waterproof to 66 feet, so rain or creek crossings won't sideline your light. Setup is tool-free thanks to the integrated clamp that locks directly to any MIL-STD-1913 rail, and the intuitive, non-slip thumb switch handles constant-on, momentary, and strobe modes without fumbling.
The real advantage here is intelligent design: the flip safety lever keeps the light from accidentally firing in your pack, and the ergonomic button is a step up from tape switches if you've used older generation models. You get serious output and reliability without the bulk or complexity of heavier duty lights, making it a genuine asset for home defense, hunting rigs, or range guns where you actually need to see your target.
| Output | 450 lumens (high mode) |
| Beam Intensity | 10,000 candelas |
| Beam Range | 656 feet (200 meters) |
| Battery | CR123a |
| Runtime | 1.5 hours on high |
| Housing Material | Glass-reinforced nylon |
| Water Resistance | Waterproof to 66 feet (20 meters) |
| Rail Interface | MIL-STD-1913 (Picatinny) |
| Switch Modes | Constant-on, momentary, strobe |
| Finish | FDE (Flat Dark Earth) |
| Model | IF71011DE |
The integrated clamp fits any firearm with a MIL-STD-1913 (Picatinny) rail, including pistols, shotguns, carbines, and rifles. No tools are required for mounting or removal.
You get 1.5 hours of runtime on a single CR123a battery at full output, making it practical for extended use during training, hunting, or home-defense scenarios.
Yes—the light is waterproof to 66 feet, which covers rain, wet brush, and creek crossings. The glass-reinforced nylon housing also resists sand, mud, and debris without degrading.
The non-slip thumb switch lets you toggle between constant illumination for sustained target identification, momentary activation for brief checks, and strobe mode for tactical use. The flip safety can lock the light entirely when not in use.
SKU: 121689160 • Weight: 0.5oz
Availability: In Stock
The Inforce WML White Gen 3 FDE tactical weapon light is a rail-mounted light built for shooters who need serious illumination on pistols, carbines, and rifles. This generation delivers 450 lumens with 10,000 candelas of beam intensity—more than double the original WML—on a single CR123a battery while maintaining the same 1.5-hour runtime. Whether you're working close quarters with a shotgun or reaching out on a rifle, the 656-foot (200-meter) beam range gives you the light throw to match your setup.
Built tough for field use, the WML Gen 3 uses glass-reinforced nylon construction that shrugs off dirt, sand, and rough handling. The housing is waterproof to 66 feet, so rain or creek crossings won't sideline your light. Setup is tool-free thanks to the integrated clamp that locks directly to any MIL-STD-1913 rail, and the intuitive, non-slip thumb switch handles constant-on, momentary, and strobe modes without fumbling.
The real advantage here is intelligent design: the flip safety lever keeps the light from accidentally firing in your pack, and the ergonomic button is a step up from tape switches if you've used older generation models. You get serious output and reliability without the bulk or complexity of heavier duty lights, making it a genuine asset for home defense, hunting rigs, or range guns where you actually need to see your target.
| Output | 450 lumens (high mode) |
| Beam Intensity | 10,000 candelas |
| Beam Range | 656 feet (200 meters) |
| Battery | CR123a |
| Runtime | 1.5 hours on high |
| Housing Material | Glass-reinforced nylon |
| Water Resistance | Waterproof to 66 feet (20 meters) |
| Rail Interface | MIL-STD-1913 (Picatinny) |
| Switch Modes | Constant-on, momentary, strobe |
| Finish | FDE (Flat Dark Earth) |
| Model | IF71011DE |
The integrated clamp fits any firearm with a MIL-STD-1913 (Picatinny) rail, including pistols, shotguns, carbines, and rifles. No tools are required for mounting or removal.
You get 1.5 hours of runtime on a single CR123a battery at full output, making it practical for extended use during training, hunting, or home-defense scenarios.
Yes—the light is waterproof to 66 feet, which covers rain, wet brush, and creek crossings. The glass-reinforced nylon housing also resists sand, mud, and debris without degrading.
The non-slip thumb switch lets you toggle between constant illumination for sustained target identification, momentary activation for brief checks, and strobe mode for tactical use. The flip safety can lock the light entirely when not in use.
SKU: 121689160 • Weight: 0.5oz