Hornady197550926
Hornady Lock-N-Load AP Progressive Press Shell Plate - #9$52.81
Availability: In Stock
The Hornady Shell Plate #11 is the precision component that makes your Lock-N-Load AP or Pro-Jector press work smoothly through every reload. Whether you're running high-volume pistol sessions or rifle rounds, this shell plate positions your case correctly at each station—a small part that matters enormously when you're chasing consistent brass prep and bullet seating. Shell Plate #11 fits multiple calibers that share the same case head diameter, so it's worth checking Hornady's shell plate compatibility chart to see what you can run before buying additional plates.
Installation is straightforward on both Lock-N-Load AP (EZ-Ject and wire ejector versions) and Pro-Jector equipment. If your press uses the older spring-type cartridge case ejector system, you'll need to order the Hornady Auto press retrofit kit (749-012-552) to use modern shell plates—something worth confirming before you load. Once you're set up, this plate is built to handle the precise indexing these progressive presses demand.
Hornady shell plates are engineered to tight tolerances so cases seat and eject reliably, trip after trip. If you're not sure which shell plate number you need or have questions about retrofit compatibility, Sinclair's tech line is available to help.
Shell Plate #11 is designed for cartridges that share the same case head diameter. Hornady publishes a detailed shell plate compatibility chart to help you identify which rounds work with this plate. Check that resource to confirm your caliber before purchasing.
Yes, Shell Plate #11 is compatible with both EZ-Ject and wire ejector versions of the Lock-N-Load AP. However, if your press still uses the older spring-type cartridge case ejector system, you'll need to purchase the Hornady Auto press retrofit kit (749-012-552) to use this modern shell plate.
Yes, Shell Plate #11 is designed for Hornady Pro-Jector equipment. Confirm your press model and ejector type to ensure compatibility.
You'll need the Hornady Auto press retrofit kit (749-012-552) to upgrade your press for use with current shell plates like this one. Contact Sinclair at 800-717-8211 if you're unsure about your press configuration.
SKU: 197550932 • Width: 4.4in • Height: 1.7in • Depth: 5in • Weight: 1.5oz
Availability: In Stock
The Hornady Shell Plate #11 is the precision component that makes your Lock-N-Load AP or Pro-Jector press work smoothly through every reload. Whether you're running high-volume pistol sessions or rifle rounds, this shell plate positions your case correctly at each station—a small part that matters enormously when you're chasing consistent brass prep and bullet seating. Shell Plate #11 fits multiple calibers that share the same case head diameter, so it's worth checking Hornady's shell plate compatibility chart to see what you can run before buying additional plates.
Installation is straightforward on both Lock-N-Load AP (EZ-Ject and wire ejector versions) and Pro-Jector equipment. If your press uses the older spring-type cartridge case ejector system, you'll need to order the Hornady Auto press retrofit kit (749-012-552) to use modern shell plates—something worth confirming before you load. Once you're set up, this plate is built to handle the precise indexing these progressive presses demand.
Hornady shell plates are engineered to tight tolerances so cases seat and eject reliably, trip after trip. If you're not sure which shell plate number you need or have questions about retrofit compatibility, Sinclair's tech line is available to help.
Shell Plate #11 is designed for cartridges that share the same case head diameter. Hornady publishes a detailed shell plate compatibility chart to help you identify which rounds work with this plate. Check that resource to confirm your caliber before purchasing.
Yes, Shell Plate #11 is compatible with both EZ-Ject and wire ejector versions of the Lock-N-Load AP. However, if your press still uses the older spring-type cartridge case ejector system, you'll need to purchase the Hornady Auto press retrofit kit (749-012-552) to use this modern shell plate.
Yes, Shell Plate #11 is designed for Hornady Pro-Jector equipment. Confirm your press model and ejector type to ensure compatibility.
You'll need the Hornady Auto press retrofit kit (749-012-552) to upgrade your press for use with current shell plates like this one. Contact Sinclair at 800-717-8211 if you're unsure about your press configuration.
SKU: 197550932 • Width: 4.4in • Height: 1.7in • Depth: 5in • Weight: 1.5oz