Hornady197558949
Hornady Match Grade Bushing .259"$23.63
Loading...
Loading...
Loading...
Availability: In Stock
The Hornady Match Grade Bushing .278" is a precision neck sizing bushing designed for reloaders who demand consistent case neck tension and minimal brass working. If you're running Hornady Match Grade or Neck sizing dies, these interchangeable bushings let you fine-tune your setup to achieve the exact bullet tension your load needs—without the guesswork or risk of over-sizing your brass. Available in .002 inch increments, the .278" bushing gives you repeatable, controlled sizing that extends case life and improves shot-to-shot consistency downrange.
The bushing's self-centering design works in tandem with Match Grade dies to eliminate the centering variables that plague traditional full-length sizing. This means your case necks are sized concentrically every single time, which translates to tighter groups and more predictable velocity. Whether you're loading for precision rifle competition, long-range hunting, or benchrest shooting, this level of control is what separates good reloading from excellent reloading.
Hornady engineered these bushings to pair seamlessly with their Match Grade Full Length and Neck sizing dies. The bushings are built to tight tolerances and finished to a professional standard—they're tools meant to last and perform. If you've already invested in Match Grade dies or are considering the system, having the right bushing for your caliber and desired tension is essential to unlocking their full potential.
| Caliber/Size | .278" |
| Type | Neck Sizing Bushing |
| Brand | Hornady |
| Sizing Increments | .002 inch |
The .278" bushing is designed for Hornady Match Grade Full Length and Match Grade Neck sizing dies. It installs in the die's self-centering bushing system to control neck sizing during the reloading process.
Hornady Match Grade bushings come in .002 inch increments. You select the size based on your desired bullet tension and your specific cartridge and bullet combination. Starting with a bushing that sizes your case neck slightly smaller than your bullet diameter, then stepping up as needed, helps you dial in the fit you want.
Yes. By allowing you to size only what's necessary—with the exact tension you need—the self-centering bushing design eliminates unnecessary over-sizing, which reduces stress on your brass and extends its reloading life.
These bushings are engineered for Hornady Match Grade dies, which feature the self-centering bushing system. They are not compatible with standard full-length sizing dies.
SKU: 197561601 • Weight: 0.01oz
Availability: In Stock
The Hornady Match Grade Bushing .278" is a precision neck sizing bushing designed for reloaders who demand consistent case neck tension and minimal brass working. If you're running Hornady Match Grade or Neck sizing dies, these interchangeable bushings let you fine-tune your setup to achieve the exact bullet tension your load needs—without the guesswork or risk of over-sizing your brass. Available in .002 inch increments, the .278" bushing gives you repeatable, controlled sizing that extends case life and improves shot-to-shot consistency downrange.
The bushing's self-centering design works in tandem with Match Grade dies to eliminate the centering variables that plague traditional full-length sizing. This means your case necks are sized concentrically every single time, which translates to tighter groups and more predictable velocity. Whether you're loading for precision rifle competition, long-range hunting, or benchrest shooting, this level of control is what separates good reloading from excellent reloading.
Hornady engineered these bushings to pair seamlessly with their Match Grade Full Length and Neck sizing dies. The bushings are built to tight tolerances and finished to a professional standard—they're tools meant to last and perform. If you've already invested in Match Grade dies or are considering the system, having the right bushing for your caliber and desired tension is essential to unlocking their full potential.
| Caliber/Size | .278" |
| Type | Neck Sizing Bushing |
| Brand | Hornady |
| Sizing Increments | .002 inch |
The .278" bushing is designed for Hornady Match Grade Full Length and Match Grade Neck sizing dies. It installs in the die's self-centering bushing system to control neck sizing during the reloading process.
Hornady Match Grade bushings come in .002 inch increments. You select the size based on your desired bullet tension and your specific cartridge and bullet combination. Starting with a bushing that sizes your case neck slightly smaller than your bullet diameter, then stepping up as needed, helps you dial in the fit you want.
Yes. By allowing you to size only what's necessary—with the exact tension you need—the self-centering bushing design eliminates unnecessary over-sizing, which reduces stress on your brass and extends its reloading life.
These bushings are engineered for Hornady Match Grade dies, which feature the self-centering bushing system. They are not compatible with standard full-length sizing dies.
SKU: 197561601 • Weight: 0.01oz