$123.91
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The Hornady Lock-N-Load AP Primer Pocket Swage Tool is a dedicated case-prep accessory for reloaders working with 223 Rem/5.56 ammunition on a Lock-N-Load AP press. If you're loading military brass or matching cases with crimped primer pockets, swaging—rather than cutting—those crimps is faster, cleaner, and eliminates the mess and trimmings that come with mechanical depriming. This tool integrates directly into your AP press setup and handles the job in a single station.
Crimped primer pockets are common on military and some commercial 223/5.56 cases and need to be dealt with before you can seat a fresh primer. The swage approach compresses the crimp inward instead of removing material, so you're not chasing tiny brass shards around your bench. Swage depth is adjustable, which matters because case brands vary slightly—you can fine-tune it to work reliably across the ammunition you're prepping without over-working any single brand.
The tool ships with everything you need to mount it on your AP press: a shell holder, feed die, swage tool, and eject die. If you're already running a Lock-N-Load AP, this is a straightforward add-on that turns primer pocket prep from a separate, tedious step into part of your normal press cycle.
| Brand | Hornady |
| Product Type | Primer Pocket Swage Tool |
| Caliber | 223 Rem/5.56 |
| Press Compatibility | Hornady Lock-N-Load AP |
| Adjustable Swage Depth | Yes |
| Included Components | Shell holder, feed die, swage tool, eject die |
Yes. This tool is designed specifically for the Hornady Lock-N-Load AP press and mounts directly to it.
Swaging compresses the crimp inward; cutting removes material. Swaging is faster, cleaner, produces no trimmings, and leaves your workbench much less messy.
Yes. The swage depth is adjustable to accommodate variations between case manufacturers, so you can dial it in for whatever brass you're working with.
The tool includes a shell holder, feed die, swage tool, and eject die—all the components needed to mount and run it on your AP press.
SKU: 115796346 • Width: 6.7in • Height: 3.6in • Depth: 6.7in • Weight: 2.5oz
Availability: In Stock
Current Stock: Out of stock
The Hornady Lock-N-Load AP Primer Pocket Swage Tool is a dedicated case-prep accessory for reloaders working with 223 Rem/5.56 ammunition on a Lock-N-Load AP press. If you're loading military brass or matching cases with crimped primer pockets, swaging—rather than cutting—those crimps is faster, cleaner, and eliminates the mess and trimmings that come with mechanical depriming. This tool integrates directly into your AP press setup and handles the job in a single station.
Crimped primer pockets are common on military and some commercial 223/5.56 cases and need to be dealt with before you can seat a fresh primer. The swage approach compresses the crimp inward instead of removing material, so you're not chasing tiny brass shards around your bench. Swage depth is adjustable, which matters because case brands vary slightly—you can fine-tune it to work reliably across the ammunition you're prepping without over-working any single brand.
The tool ships with everything you need to mount it on your AP press: a shell holder, feed die, swage tool, and eject die. If you're already running a Lock-N-Load AP, this is a straightforward add-on that turns primer pocket prep from a separate, tedious step into part of your normal press cycle.
| Brand | Hornady |
| Product Type | Primer Pocket Swage Tool |
| Caliber | 223 Rem/5.56 |
| Press Compatibility | Hornady Lock-N-Load AP |
| Adjustable Swage Depth | Yes |
| Included Components | Shell holder, feed die, swage tool, eject die |
Yes. This tool is designed specifically for the Hornady Lock-N-Load AP press and mounts directly to it.
Swaging compresses the crimp inward; cutting removes material. Swaging is faster, cleaner, produces no trimmings, and leaves your workbench much less messy.
Yes. The swage depth is adjustable to accommodate variations between case manufacturers, so you can dial it in for whatever brass you're working with.
The tool includes a shell holder, feed die, swage tool, and eject die—all the components needed to mount and run it on your AP press.
SKU: 115796346 • Width: 6.7in • Height: 3.6in • Depth: 6.7in • Weight: 2.5oz
