Hornady197558073
Hornady Cam Lock Bullet Collets #14 .204"$12.68
Availability: In Stock
Current Stock: Out of stock
The Hornady Cam Lock Bullet Collet #9 is a replacement collet for reloaders working with .338" and .358" diameter bullets. If you're running a progressive or single-stage press setup for pulling bullets, this collet swaps into the Hornady Cam-Lock puller body to grip and extract bullets in those calibers. It's the consumable part that takes the wear, so having spares on hand means you're never caught waiting when an existing collet gets scored or needs retirement.
Hornady's cam-lock design uses your press leverage to secure the collet around the bullet, then pulls it clean. Since the collet is what actually contacts your bullet, sizing matters—get the right number for your caliber, and the tool works smoothly. This is the #9 collet, sized specifically for .338" and .358" bullets, covering magnum rifle cartridges and common lever-action rounds in that bore range.
Reloaders who pull bullets regularly—whether you're salvaging brass from loaded ammo, experimenting with loads, or managing inventory—benefit from keeping replacement collets on the shelf. They're inexpensive insurance against a tool failure mid-session, and collets do wear over time with repeated use.
| Collet Number | #9 |
| Bullet Diameter | .338" / .358" |
| Brand | Hornady |
| Compatibility | Hornady Cam-Lock Bullet Puller |
The #9 collet is sized for .338" and .358" diameter bullets. That covers magnum rifle calibers like .338 Win Mag and .338 Lapua, as well as .358 Winchester and similar rounds.
This is the replacement collet only. It installs into an existing Hornady Cam-Lock Bullet Puller body. If you don't have the puller frame already, you'll need to purchase that separately.
Collets are sized by bullet diameter, not weight. As long as your bullets are .338" or .358" in diameter, this #9 collet will grip them regardless of weight.
SKU: 197558164 • Weight: 0.04oz
Availability: In Stock
Current Stock: Out of stock
The Hornady Cam Lock Bullet Collet #9 is a replacement collet for reloaders working with .338" and .358" diameter bullets. If you're running a progressive or single-stage press setup for pulling bullets, this collet swaps into the Hornady Cam-Lock puller body to grip and extract bullets in those calibers. It's the consumable part that takes the wear, so having spares on hand means you're never caught waiting when an existing collet gets scored or needs retirement.
Hornady's cam-lock design uses your press leverage to secure the collet around the bullet, then pulls it clean. Since the collet is what actually contacts your bullet, sizing matters—get the right number for your caliber, and the tool works smoothly. This is the #9 collet, sized specifically for .338" and .358" bullets, covering magnum rifle cartridges and common lever-action rounds in that bore range.
Reloaders who pull bullets regularly—whether you're salvaging brass from loaded ammo, experimenting with loads, or managing inventory—benefit from keeping replacement collets on the shelf. They're inexpensive insurance against a tool failure mid-session, and collets do wear over time with repeated use.
| Collet Number | #9 |
| Bullet Diameter | .338" / .358" |
| Brand | Hornady |
| Compatibility | Hornady Cam-Lock Bullet Puller |
The #9 collet is sized for .338" and .358" diameter bullets. That covers magnum rifle calibers like .338 Win Mag and .338 Lapua, as well as .358 Winchester and similar rounds.
This is the replacement collet only. It installs into an existing Hornady Cam-Lock Bullet Puller body. If you don't have the puller frame already, you'll need to purchase that separately.
Collets are sized by bullet diameter, not weight. As long as your bullets are .338" or .358" in diameter, this #9 collet will grip them regardless of weight.
SKU: 197558164 • Weight: 0.04oz