Hornady144600313
Hornady 546444 Ser3 2-Die Set 338Arc .338$62.88
Availability: In Stock
The Hornady Custom Grade New Dimension 2-Die Set for 25 Creedmoor gives serious reloaders the core tools needed to produce accurate, consistent ammunition. This two-die set pairs a full-length sizer die with a seating die, both built to Hornady's Custom Grade specifications for reliable performance at the press. Whether you're fine-tuning loads for a long-range rifle or developing hunting rounds, this set handles the essential sizing and seating operations that define reloading precision.
The full-length sizer die features Hornady's Zip Spindle design—a series of shallow threads cut into both the spindle and collet that eliminate slippage and make lock-down adjustments smooth and repeatable. This means less fidgeting mid-session and more confidence that your die position stays put. The seating die includes a floating bullet alignment sleeve and stem that pre-align the bullet and case before seating begins, helping you avoid runout and improving accuracy. The seating operation also applies a crimp to secure the bullet firmly in the case.
The set comes packaged in a plastic storage box with two Sure-Loc die-locking rings included, keeping your dies organized and your setup locked in place once you've dialed in your pressures. Note that the shellholder is sold separately—choose the correct holder for your 25 Creedmoor brass to complete your reloading station.
| Cartridge | 25 Creedmoor |
| Die Count | 2 |
| Die Type | Full Length Sizer and Seater |
| Thread Size | 7/8-14 |
| Die Locking Rings | 2 Sure-Loc rings included |
| Storage | Plastic box included |
| Shellholder | Sold separately |
The set contains a full-length sizer die and a seating die, both Custom Grade New Dimension quality. You also get two Sure-Loc die-locking rings and a plastic storage box. The shellholder must be purchased separately.
The dies have standard 7/8-14 threads, which fit all common single-stage and progressive reloading presses that accept this thread size.
You'll need to add a shellholder for 25 Creedmoor brass to complete this die set. The shellholder is sold separately and is required to hold your case during the sizing and seating operations.
The floating sleeve and stem in the seating die pre-position the bullet relative to the case before seating occurs, which helps reduce bullet runout and inconsistency—factors that directly improve shot-to-shot accuracy.
SKU: 144599176 • Width: 5.3in • Height: 1.9in • Depth: 7.5in • Weight: 1.325oz
Availability: In Stock
The Hornady Custom Grade New Dimension 2-Die Set for 25 Creedmoor gives serious reloaders the core tools needed to produce accurate, consistent ammunition. This two-die set pairs a full-length sizer die with a seating die, both built to Hornady's Custom Grade specifications for reliable performance at the press. Whether you're fine-tuning loads for a long-range rifle or developing hunting rounds, this set handles the essential sizing and seating operations that define reloading precision.
The full-length sizer die features Hornady's Zip Spindle design—a series of shallow threads cut into both the spindle and collet that eliminate slippage and make lock-down adjustments smooth and repeatable. This means less fidgeting mid-session and more confidence that your die position stays put. The seating die includes a floating bullet alignment sleeve and stem that pre-align the bullet and case before seating begins, helping you avoid runout and improving accuracy. The seating operation also applies a crimp to secure the bullet firmly in the case.
The set comes packaged in a plastic storage box with two Sure-Loc die-locking rings included, keeping your dies organized and your setup locked in place once you've dialed in your pressures. Note that the shellholder is sold separately—choose the correct holder for your 25 Creedmoor brass to complete your reloading station.
| Cartridge | 25 Creedmoor |
| Die Count | 2 |
| Die Type | Full Length Sizer and Seater |
| Thread Size | 7/8-14 |
| Die Locking Rings | 2 Sure-Loc rings included |
| Storage | Plastic box included |
| Shellholder | Sold separately |
The set contains a full-length sizer die and a seating die, both Custom Grade New Dimension quality. You also get two Sure-Loc die-locking rings and a plastic storage box. The shellholder must be purchased separately.
The dies have standard 7/8-14 threads, which fit all common single-stage and progressive reloading presses that accept this thread size.
You'll need to add a shellholder for 25 Creedmoor brass to complete this die set. The shellholder is sold separately and is required to hold your case during the sizing and seating operations.
The floating sleeve and stem in the seating die pre-position the bullet relative to the case before seating occurs, which helps reduce bullet runout and inconsistency—factors that directly improve shot-to-shot accuracy.
SKU: 144599176 • Width: 5.3in • Height: 1.9in • Depth: 7.5in • Weight: 1.325oz