H
$37.33
Availability: In Stock
Speed up your 9mm reloading workflow with the Hornady Lock-N-Load Bullet Feeder 3 Pack (Model 095350). If you're running a progressive press and want to eliminate manual bullet positioning, these tubes pair with a Hornady bullet feeder die to automate bullet feeding station by station. Each tube holds 40+ bullets, depending on weight, so you load fewer interruptions and more rounds downrange.
The Lock-N-Load system works on any progressive press equipped with 7/8-14 thread die-stations—which covers most modern Hornady setups and many competitors' presses. Pre-load your tubes at the bench, drop them into the feeder die, and let the press handle the repetitive work. A milled window on each tube lets you see at a glance when you're running low, so you're never caught mid-session without ammunition.
This 3-pack gives you the flexibility to keep multiple tubes loaded and ready, or rotate them as you work through a session. Unlike traditional hoppers, the tube design is compact, precise, and eliminates jams and doubles that can plague gravity-fed systems. You'll need a separate Hornady bullet feeder die to use these tubes; they're the consumable part of the system, not the die itself.
| Caliber | 9mm |
| Quantity | 3 tubes per pack |
| Capacity per Tube | 40+ rounds (caliber and bullet weight dependent) |
| Thread Compatibility | 7/8-14 progressive press die-stations |
| Model Number | 095350 |
| Brand | Hornady |
Lock-N-Load Bullet Tubes work with any progressive press that has 7/8-14 thread die-stations and is used in combination with a Hornady bullet feeder die. If your press accepts standard 7/8-14 dies, you're good to go.
You'll need a Hornady bullet feeder die (sold separately) installed in a compatible progressive press. The tubes simply load into the top of that die; they are not a standalone component.
No. This 3-pack is specifically designed for 9mm. Hornady offers separate packs for 40 cal/10mm and 45 cal.
Each tube features a milled window so you can visually inspect the bullet level inside without opening it, letting you swap in a fresh tube before you run dry.
SKU: 115776762 • Width: 4.7in • Height: 0.8in • Depth: 21.5in • Weight: 0.63oz
Availability: In Stock
Speed up your 9mm reloading workflow with the Hornady Lock-N-Load Bullet Feeder 3 Pack (Model 095350). If you're running a progressive press and want to eliminate manual bullet positioning, these tubes pair with a Hornady bullet feeder die to automate bullet feeding station by station. Each tube holds 40+ bullets, depending on weight, so you load fewer interruptions and more rounds downrange.
The Lock-N-Load system works on any progressive press equipped with 7/8-14 thread die-stations—which covers most modern Hornady setups and many competitors' presses. Pre-load your tubes at the bench, drop them into the feeder die, and let the press handle the repetitive work. A milled window on each tube lets you see at a glance when you're running low, so you're never caught mid-session without ammunition.
This 3-pack gives you the flexibility to keep multiple tubes loaded and ready, or rotate them as you work through a session. Unlike traditional hoppers, the tube design is compact, precise, and eliminates jams and doubles that can plague gravity-fed systems. You'll need a separate Hornady bullet feeder die to use these tubes; they're the consumable part of the system, not the die itself.
| Caliber | 9mm |
| Quantity | 3 tubes per pack |
| Capacity per Tube | 40+ rounds (caliber and bullet weight dependent) |
| Thread Compatibility | 7/8-14 progressive press die-stations |
| Model Number | 095350 |
| Brand | Hornady |
Lock-N-Load Bullet Tubes work with any progressive press that has 7/8-14 thread die-stations and is used in combination with a Hornady bullet feeder die. If your press accepts standard 7/8-14 dies, you're good to go.
You'll need a Hornady bullet feeder die (sold separately) installed in a compatible progressive press. The tubes simply load into the top of that die; they are not a standalone component.
No. This 3-pack is specifically designed for 9mm. Hornady offers separate packs for 40 cal/10mm and 45 cal.
Each tube features a milled window so you can visually inspect the bullet level inside without opening it, letting you swap in a fresh tube before you run dry.
SKU: 115776762 • Width: 4.7in • Height: 0.8in • Depth: 21.5in • Weight: 0.63oz