Hornady197550395
Hornady 40 S&W, 10Mm Bullet Seating Die$29.46
Availability: In Stock
The Hornady 095332 Bullet Feeder Die for .40 S&W and 10mm Auto is a purpose-built reloading component designed to automate bullet seating on progressive presses. If you're running high-volume pistol loads and want to eliminate the tedium of hand-feeding bullets, this die integrates seamlessly with Hornady's Lock-N-Load system to keep rounds moving through your press without interruption.
The core innovation here is the tube and collet design: bullets sit securely until a fresh case indexes into position, then the collet releases the round for seating. That workflow means you're not fumbling with individual rounds mid-press cycle—you're feeding, sizing, and seating in one smooth motion. The solid steel construction is built to handle the volume if you're a serious handloader, and it threads into standard 7/8"-14 die stations so it fits most progressive press setups.
This is a die-only purchase; you'll need the Lock-N-Load Bullet Feeder system and compatible bullet tubes (sold separately) to complete the setup. If you're already committed to the Hornady platform and want to shave minutes off a reloading session—especially if you're prepping ammo for competition or regular range trips—this die is a solid upgrade to your bench.
| Caliber | .40 S&W, 10mm Auto |
| Die Thread | 7/8"-14 (industry standard) |
| Manufacturer | Hornady |
| Part Number | 095332 |
Yes, provided your press has a standard 7/8"-14 threaded die station. The Hornady 095332 is designed for the Lock-N-Load system. Verify compatibility with your specific press model before purchase.
Yes. This die alone will not function; you'll need the separate Lock-N-Load Bullet Feeder system and the appropriate bullet tubes for your caliber (.40 S&W or 10mm Auto). Both are sold separately.
The Hornady 095332 is engineered for .40 S&W and 10mm Auto ammunition only. Do not attempt to use it for other pistol or rifle calibers.
No special reloading tools are required to install or operate the die. Standard die installation into your press's threaded station is all that's needed.
SKU: 115684579 • Width: 4.1in • Height: 1.4in • Depth: 6.8in • Weight: 0.8oz
Availability: In Stock
The Hornady 095332 Bullet Feeder Die for .40 S&W and 10mm Auto is a purpose-built reloading component designed to automate bullet seating on progressive presses. If you're running high-volume pistol loads and want to eliminate the tedium of hand-feeding bullets, this die integrates seamlessly with Hornady's Lock-N-Load system to keep rounds moving through your press without interruption.
The core innovation here is the tube and collet design: bullets sit securely until a fresh case indexes into position, then the collet releases the round for seating. That workflow means you're not fumbling with individual rounds mid-press cycle—you're feeding, sizing, and seating in one smooth motion. The solid steel construction is built to handle the volume if you're a serious handloader, and it threads into standard 7/8"-14 die stations so it fits most progressive press setups.
This is a die-only purchase; you'll need the Lock-N-Load Bullet Feeder system and compatible bullet tubes (sold separately) to complete the setup. If you're already committed to the Hornady platform and want to shave minutes off a reloading session—especially if you're prepping ammo for competition or regular range trips—this die is a solid upgrade to your bench.
| Caliber | .40 S&W, 10mm Auto |
| Die Thread | 7/8"-14 (industry standard) |
| Manufacturer | Hornady |
| Part Number | 095332 |
Yes, provided your press has a standard 7/8"-14 threaded die station. The Hornady 095332 is designed for the Lock-N-Load system. Verify compatibility with your specific press model before purchase.
Yes. This die alone will not function; you'll need the separate Lock-N-Load Bullet Feeder system and the appropriate bullet tubes for your caliber (.40 S&W or 10mm Auto). Both are sold separately.
The Hornady 095332 is engineered for .40 S&W and 10mm Auto ammunition only. Do not attempt to use it for other pistol or rifle calibers.
No special reloading tools are required to install or operate the die. Standard die installation into your press's threaded station is all that's needed.
SKU: 115684579 • Width: 4.1in • Height: 1.4in • Depth: 6.8in • Weight: 0.8oz