Hornady115723397
Hornady 050125 Silver Powder Measure Drain Insert for Reloading$14.55
Availability: In Stock
The Hornady Powder Cop is a quality control station designed for progressive reloading presses that use 7/8-inch-14 threading. If you're running high-volume rifle or handgun loads and want to catch powder charge errors before they become dangerous—or wasteful—this accessory lets you inspect every drop automatically as it happens. Install it right after your powder drop station, and the internal stem rises to display the O-ring, giving you a visual confirmation that each charge meets spec. It's a simple but effective safeguard that takes seconds per round and eliminates the guesswork.
Hornady has been building reloading equipment for over 60 years, and this die reflects that expertise. The steel construction is tough enough for thousands of rounds, and the design is straightforward enough that you won't add time to your press cycle. Whether you're a precision rifle reloader who demands consistency or a high-volume handgun enthusiast who can't afford a squib or overcharge, this powder check system pays for itself the first time it catches a mistake.
Compatible with most progressive presses that accept standard 7/8-inch-14 dies, the Powder Cop integrates seamlessly into your existing setup. No special modifications, no learning curve—just install, run, and inspect.
| Manufacturer | Hornady |
| Product Code | 050063 |
| Thread Size | 7/8-inch-14 |
| Material | Steel |
| Compatible Press Type | Progressive reloading presses with 7/8-inch-14 dies |
The Powder Cop is designed for progressive presses that accept 7/8-inch-14 threaded dies, which covers most common brands. Check that your press uses standard 7/8-14 threading before ordering.
Install it immediately after your powder drop station so that each charge can be checked as it drops into the case.
The internal stem rises as the charge is deposited, and the O-ring moves up with it. The position of the O-ring gives you a visual reference to confirm the charge size; an unusually high or low stem position signals a charge that's out of spec.
SKU: 115692702 • Width: 0.1in • Height: 0.1in • Depth: 6in • Weight: 0.45oz
Availability: In Stock
The Hornady Powder Cop is a quality control station designed for progressive reloading presses that use 7/8-inch-14 threading. If you're running high-volume rifle or handgun loads and want to catch powder charge errors before they become dangerous—or wasteful—this accessory lets you inspect every drop automatically as it happens. Install it right after your powder drop station, and the internal stem rises to display the O-ring, giving you a visual confirmation that each charge meets spec. It's a simple but effective safeguard that takes seconds per round and eliminates the guesswork.
Hornady has been building reloading equipment for over 60 years, and this die reflects that expertise. The steel construction is tough enough for thousands of rounds, and the design is straightforward enough that you won't add time to your press cycle. Whether you're a precision rifle reloader who demands consistency or a high-volume handgun enthusiast who can't afford a squib or overcharge, this powder check system pays for itself the first time it catches a mistake.
Compatible with most progressive presses that accept standard 7/8-inch-14 dies, the Powder Cop integrates seamlessly into your existing setup. No special modifications, no learning curve—just install, run, and inspect.
| Manufacturer | Hornady |
| Product Code | 050063 |
| Thread Size | 7/8-inch-14 |
| Material | Steel |
| Compatible Press Type | Progressive reloading presses with 7/8-inch-14 dies |
The Powder Cop is designed for progressive presses that accept 7/8-inch-14 threaded dies, which covers most common brands. Check that your press uses standard 7/8-14 threading before ordering.
Install it immediately after your powder drop station so that each charge can be checked as it drops into the case.
The internal stem rises as the charge is deposited, and the O-ring moves up with it. The position of the O-ring gives you a visual reference to confirm the charge size; an unusually high or low stem position signals a charge that's out of spec.
SKU: 115692702 • Width: 0.1in • Height: 0.1in • Depth: 6in • Weight: 0.45oz