Availability: In Stock
The HiViz MPSN521 LiteWave H3 Tritium/LitePipe sight set for S&W M&P Shield delivers a practical dual-illumination system built for shooters who need reliable sight acquisition around the clock. This front-and-rear sight set pairs fiber optic light-gathering rods with self-illuminating tritium inserts, so whether you're training at midday or responding to a threat in low light, you get a consistent, easy-to-find sight picture. The green tritium dots glow on their own after dark, while the orange-ringed front sight and green fiber optic rear give you rapid target acquisition in bright or transitional conditions.
Built from steel and finished in satin black, these sights are engineered to drop into your M&P Shield's factory dovetail or screw holes without modification. The three-dot sight pattern is intuitive and time-tested—front and rear dots in green, with that distinctive orange ring around the front to help you locate and align the sight picture faster. Size and clearance are dialed in for standard holster carry, so you won't be stuck reholstering or buying new gear.
HiViz's H3 tritium formula burns brighter than standard night sights, keeping those green dots visible in the darkest conditions. The fiber optic rods soak up available light to shine during daylight or dusk, eliminating the dead zone where some night sights fade. If you carry an M&P Shield for personal protection or duty, or run it in low-light training, this sight set covers your bases without needing a flashlight to see your sights.
| Product Name | HiViz MPSN521 LiteWave H3 Tritium/LitePipe Sight Set |
| Firearm Fit | Smith & Wesson M&P Shield |
| Sight Pattern | Three-dot (horizontal) |
| Front Dot Color | Green tritium with orange ring |
| Rear Dot Color | Green tritium and green fiber optic |
| Light Source | H3 self-illuminating tritium + fiber optic LitePipe |
| Material | Steel |
| Finish | Satin black |
| Installation | Factory dovetail or screw hole |
Yes. The MPSN521 is engineered specifically for the M&P Shield and uses the firearm's factory dovetail or screw holes for a drop-in fit. No gunsmithing required.
The sights use H3 tritium inserts that self-illuminate in darkness, providing green dots visible without any external light source. In daylight or transitional light, the fiber optic LitePipe rods gather ambient light to shine bright green. Together, they keep your sight picture visible from sunrise to the darkest night.
You receive a front and rear sight pair. The front sight has a green tritium dot ringed with orange fiber optic; the rear has green tritium and fiber optic dots. Both are ready to install into your M&P Shield's existing slide cuts.
Yes. The sight dimensions are designed to provide proper clearance in standard holsters, so you won't have to find new carry gear or modify your existing rig.
SKU: 115737672 • Width: 3.8in • Height: 0.1in • Depth: 6.5in • Weight: 0.06oz
Availability: In Stock
The HiViz MPSN521 LiteWave H3 Tritium/LitePipe sight set for S&W M&P Shield delivers a practical dual-illumination system built for shooters who need reliable sight acquisition around the clock. This front-and-rear sight set pairs fiber optic light-gathering rods with self-illuminating tritium inserts, so whether you're training at midday or responding to a threat in low light, you get a consistent, easy-to-find sight picture. The green tritium dots glow on their own after dark, while the orange-ringed front sight and green fiber optic rear give you rapid target acquisition in bright or transitional conditions.
Built from steel and finished in satin black, these sights are engineered to drop into your M&P Shield's factory dovetail or screw holes without modification. The three-dot sight pattern is intuitive and time-tested—front and rear dots in green, with that distinctive orange ring around the front to help you locate and align the sight picture faster. Size and clearance are dialed in for standard holster carry, so you won't be stuck reholstering or buying new gear.
HiViz's H3 tritium formula burns brighter than standard night sights, keeping those green dots visible in the darkest conditions. The fiber optic rods soak up available light to shine during daylight or dusk, eliminating the dead zone where some night sights fade. If you carry an M&P Shield for personal protection or duty, or run it in low-light training, this sight set covers your bases without needing a flashlight to see your sights.
| Product Name | HiViz MPSN521 LiteWave H3 Tritium/LitePipe Sight Set |
| Firearm Fit | Smith & Wesson M&P Shield |
| Sight Pattern | Three-dot (horizontal) |
| Front Dot Color | Green tritium with orange ring |
| Rear Dot Color | Green tritium and green fiber optic |
| Light Source | H3 self-illuminating tritium + fiber optic LitePipe |
| Material | Steel |
| Finish | Satin black |
| Installation | Factory dovetail or screw hole |
Yes. The MPSN521 is engineered specifically for the M&P Shield and uses the firearm's factory dovetail or screw holes for a drop-in fit. No gunsmithing required.
The sights use H3 tritium inserts that self-illuminate in darkness, providing green dots visible without any external light source. In daylight or transitional light, the fiber optic LitePipe rods gather ambient light to shine bright green. Together, they keep your sight picture visible from sunrise to the darkest night.
You receive a front and rear sight pair. The front sight has a green tritium dot ringed with orange fiber optic; the rear has green tritium and fiber optic dots. Both are ready to install into your M&P Shield's existing slide cuts.
Yes. The sight dimensions are designed to provide proper clearance in standard holsters, so you won't have to find new carry gear or modify your existing rig.
SKU: 115737672 • Width: 3.8in • Height: 0.1in • Depth: 6.5in • Weight: 0.06oz