Availability: In Stock
The Hi-Viz MiniComp is a fiber optic front sight designed to replace the factory bead on most vent-ribbed shotguns with removable front beads. If you shoot a lot and find that traditional bead sight harder to locate in varied light, or if you want faster sight acquisition for hunting or clay shooting, the MiniComp's bright, interchangeable fiber optic tubes deliver a visible aiming point that stands out in the field or on the range. It threads onto your gun like the original bead, so there's no gunsmithing required.
What makes this sight practical is the three swap-out LitePipes: red, green, and orange. Fiber optic sights gather ambient light and glow along their length, and different colors perform differently depending on the time of day and lighting conditions. You get the flexibility to find what works best for your hunting situation—or to match your preference on the clays course. The .100-inch diameter is standard shotgun front bead sizing, keeping the sight profile low and unobtrusive.
Installation is straightforward: if your shotgun has a vent rib and a threaded front bead that comes off easily, you can swap it for the MiniComp in minutes. It's a small upgrade that can genuinely improve sight picture and speed, especially if you're shooting in low light or hunting birds in overcast conditions.
| Sight Type | Fiber Optic Front Sight |
| LitePipe Colors Included | Red, Green, Orange |
| LitePipe Diameter | .100 inch |
| Attachment Method | Screw-on (replaces removable front bead) |
| Compatible Shotguns | Most vent-ribbed shotguns with removable front bead |
The MiniComp is designed for most vent-ribbed shotguns that use a removable, threaded front bead. If your shotgun has a standard vent rib and the factory bead screws off easily, it should work. Uncommon or proprietary bead systems may not be compatible—verify your gun's front sight is removable before purchasing.
Yes. The three LitePipes are interchangeable, so you can swap them based on light conditions or preference without tools. Orange often works best in bright sunlight, green in mixed light, and red in low light.
No. The MiniComp screws onto your shotgun the same way the original bead does. If you can unscrew the factory bead, you can install the MiniComp in under a minute.
The sight comes with three interchangeable LitePipes (red, green, and orange) already assembled in the sight body.
SKU: 115766019 • Width: 3.1in • Height: 1.4in • Depth: 5.6in • Weight: 0.06oz
Availability: In Stock
The Hi-Viz MiniComp is a fiber optic front sight designed to replace the factory bead on most vent-ribbed shotguns with removable front beads. If you shoot a lot and find that traditional bead sight harder to locate in varied light, or if you want faster sight acquisition for hunting or clay shooting, the MiniComp's bright, interchangeable fiber optic tubes deliver a visible aiming point that stands out in the field or on the range. It threads onto your gun like the original bead, so there's no gunsmithing required.
What makes this sight practical is the three swap-out LitePipes: red, green, and orange. Fiber optic sights gather ambient light and glow along their length, and different colors perform differently depending on the time of day and lighting conditions. You get the flexibility to find what works best for your hunting situation—or to match your preference on the clays course. The .100-inch diameter is standard shotgun front bead sizing, keeping the sight profile low and unobtrusive.
Installation is straightforward: if your shotgun has a vent rib and a threaded front bead that comes off easily, you can swap it for the MiniComp in minutes. It's a small upgrade that can genuinely improve sight picture and speed, especially if you're shooting in low light or hunting birds in overcast conditions.
| Sight Type | Fiber Optic Front Sight |
| LitePipe Colors Included | Red, Green, Orange |
| LitePipe Diameter | .100 inch |
| Attachment Method | Screw-on (replaces removable front bead) |
| Compatible Shotguns | Most vent-ribbed shotguns with removable front bead |
The MiniComp is designed for most vent-ribbed shotguns that use a removable, threaded front bead. If your shotgun has a standard vent rib and the factory bead screws off easily, it should work. Uncommon or proprietary bead systems may not be compatible—verify your gun's front sight is removable before purchasing.
Yes. The three LitePipes are interchangeable, so you can swap them based on light conditions or preference without tools. Orange often works best in bright sunlight, green in mixed light, and red in low light.
No. The MiniComp screws onto your shotgun the same way the original bead does. If you can unscrew the factory bead, you can install the MiniComp in under a minute.
The sight comes with three interchangeable LitePipes (red, green, and orange) already assembled in the sight body.
SKU: 115766019 • Width: 3.1in • Height: 1.4in • Depth: 5.6in • Weight: 0.06oz
