Loading...
Loading...
Loading...
Availability: In Stock
The Hiperfire HPTE Hipertouch Elite single-stage curved trigger for AR-platform rifles brings match-grade performance to shooters who demand a crisp, predictable break with minimal pre-travel. Built on Hiperfire's dual-coil spring design, the Elite delivers 35% more hammer striking power than a standard mil-spec trigger while keeping the pull weight in your choice of 2.5 or 3.5 pounds. Whether you're running precision drills at the range, competing in tactical matches, or hunting, this curved trigger shoe gives you the control and responsiveness that separates good shooting from great shooting.
What sets the Elite apart is its refined geometry: shorter pre-travel than the Genesis model, snappier reset, and a break so clean you won't telegraph your shot. The curved trigger bow sits naturally in your finger, and the consistency of the pull eliminates the guesswork that can creep into your trigger control. You get a smooth, fast locktime without the creep that can throw off your sight picture or introduce flinch. The interchangeable hammer springs—color-coded for easy identification—let you dial in the exact pull weight your technique demands, and there's no need to fuss with set screws that can loosen over time.
The Elite is engineered to fit small-pin (.153") AR-15 lower receivers and AR-308 rifles that accept AR-15-pattern triggers. It's a purpose-built upgrade for shooters who want more out of their platform without the complexity of adjustable systems or the bulk of unnecessary hardware. If you're serious about tightening your groups and improving shot-to-shot consistency, the Hipertouch Elite gives you the mechanical foundation to do it.
| Trigger Type | Single-stage curved |
| Pull Weight Options | 2.5 lbs or 3.5 lbs (interchangeable springs) |
| Compatibility | AR-15 lower receivers (small pin .153\"), AR-308 rifles using AR-15 triggers |
| Springs Included | 2 interchangeable color-coded hammer springs |
| Hammer Energy | 35% increase over mil-spec triggers |
Yes, the Elite is designed for small-pin (.153\") AR-15 lower receivers. It also works with AR-308 rifles that accept AR-15-pattern triggers. Check your lower receiver's pin diameter to confirm compatibility before ordering.
Yes. The Elite includes two interchangeable, color-coded hammer springs—one for each weight. You can swap them without tools or set screws; simply remove the trigger group and exchange the springs to change your pull weight.
The Elite offers shorter pre-travel and faster reset than the Genesis, along with a quicker break designed for match-grade precision. Both share the dual-coil spring system and interchangeable spring weights, but the Elite is tuned for shooters who want maximum refinement.
The HPTE Elite includes the trigger assembly and two interchangeable hammer springs for your chosen pull weights. No additional tools or components are required for installation in a compatible lower receiver.
SKU: 115835757 • Width: 4in • Height: 0.8in • Depth: 6.1in • Weight: 0.31oz
Availability: In Stock
The Hiperfire HPTE Hipertouch Elite single-stage curved trigger for AR-platform rifles brings match-grade performance to shooters who demand a crisp, predictable break with minimal pre-travel. Built on Hiperfire's dual-coil spring design, the Elite delivers 35% more hammer striking power than a standard mil-spec trigger while keeping the pull weight in your choice of 2.5 or 3.5 pounds. Whether you're running precision drills at the range, competing in tactical matches, or hunting, this curved trigger shoe gives you the control and responsiveness that separates good shooting from great shooting.
What sets the Elite apart is its refined geometry: shorter pre-travel than the Genesis model, snappier reset, and a break so clean you won't telegraph your shot. The curved trigger bow sits naturally in your finger, and the consistency of the pull eliminates the guesswork that can creep into your trigger control. You get a smooth, fast locktime without the creep that can throw off your sight picture or introduce flinch. The interchangeable hammer springs—color-coded for easy identification—let you dial in the exact pull weight your technique demands, and there's no need to fuss with set screws that can loosen over time.
The Elite is engineered to fit small-pin (.153") AR-15 lower receivers and AR-308 rifles that accept AR-15-pattern triggers. It's a purpose-built upgrade for shooters who want more out of their platform without the complexity of adjustable systems or the bulk of unnecessary hardware. If you're serious about tightening your groups and improving shot-to-shot consistency, the Hipertouch Elite gives you the mechanical foundation to do it.
| Trigger Type | Single-stage curved |
| Pull Weight Options | 2.5 lbs or 3.5 lbs (interchangeable springs) |
| Compatibility | AR-15 lower receivers (small pin .153\"), AR-308 rifles using AR-15 triggers |
| Springs Included | 2 interchangeable color-coded hammer springs |
| Hammer Energy | 35% increase over mil-spec triggers |
Yes, the Elite is designed for small-pin (.153\") AR-15 lower receivers. It also works with AR-308 rifles that accept AR-15-pattern triggers. Check your lower receiver's pin diameter to confirm compatibility before ordering.
Yes. The Elite includes two interchangeable, color-coded hammer springs—one for each weight. You can swap them without tools or set screws; simply remove the trigger group and exchange the springs to change your pull weight.
The Elite offers shorter pre-travel and faster reset than the Genesis, along with a quicker break designed for match-grade precision. Both share the dual-coil spring system and interchangeable spring weights, but the Elite is tuned for shooters who want maximum refinement.
The HPTE Elite includes the trigger assembly and two interchangeable hammer springs for your chosen pull weights. No additional tools or components are required for installation in a compatible lower receiver.
SKU: 115835757 • Width: 4in • Height: 0.8in • Depth: 6.1in • Weight: 0.31oz