Hiperfire121686901
Hiperfire Hipercomp Gen2 9mm Black Threaded Muzzle Brake 1/2"x28$65.55
Availability: In Stock
The Hiperfire Hipercomp Gen2 7.62x39mm muzzle brake is engineered to tame the recoil and muzzle rise that comes with intermediate-power rifle shooting. Built for shooters running 7.62×39 platforms—whether you're behind an AK-pattern rifle or a 7.62×39 precision build—this threaded muzzle device uses a compensator design to manage felt recoil and help you stay on target through rapid fire or multiple shots. At just 3.2 ounces, it adds minimal weight to your setup while delivering noticeable recoil reduction that makes a real difference in practical shooting and training scenarios.
Hiperfire's design is backed by comparative live-fire testing to validate performance claims—not marketing hype. The Hipercomp Gen2 threads on with a left-hand metric pitch (M14x1 LH), common on many 7.62×39 barrels. Its .95-inch diameter keeps the profile clean and proportional, fitting naturally on mid-length builds without looking oversized. The brake comes with a crush washer, so you have everything needed for installation.
This is a solid choice for shooters who want to reduce recoil and muzzle climb on a 7.62×39 without breaking the bank or adding significant weight. Whether you're running steel-cased ammo at the range, training for accuracy, or setting up a reliable intermediate-power rifle, the Hipercomp Gen2 gives you a practical way to control your gun's behavior.
| Caliber | 7.62×39 |
| Thread Pattern | M14x1 Metric LH (Left-Hand) |
| Diameter | .95 inch |
| Weight | 3.2 oz |
| Finish | Black |
| Included | Crush washer |
Yes, as long as your barrel has an M14x1 left-hand metric thread. This is a common factory spec for 7.62×39 barrels. If you're unsure about your barrel's thread pitch, measure or contact the manufacturer before ordering.
The muzzle brake and a crush washer for installation. You'll need an armorer's wrench or proper tools to thread it on securely.
The Hipercomp Gen2 is designed to provide noticeable recoil and muzzle rise reduction during shooting. Exact felt reduction varies with ammunition power level and shooter setup, but the design has been verified through live-fire testing.
Yes. The Hipercomp Gen2 works well for both range training and hunting applications where you run 7.62×39. Its lightweight design keeps your rifle balanced, and the recoil reduction helps you manage follow-up shots and accuracy.
SKU: 121688284 • Width: 4.5in • Height: 2in • Depth: 6.5in • Weight: 0.31oz
Availability: In Stock
The Hiperfire Hipercomp Gen2 7.62x39mm muzzle brake is engineered to tame the recoil and muzzle rise that comes with intermediate-power rifle shooting. Built for shooters running 7.62×39 platforms—whether you're behind an AK-pattern rifle or a 7.62×39 precision build—this threaded muzzle device uses a compensator design to manage felt recoil and help you stay on target through rapid fire or multiple shots. At just 3.2 ounces, it adds minimal weight to your setup while delivering noticeable recoil reduction that makes a real difference in practical shooting and training scenarios.
Hiperfire's design is backed by comparative live-fire testing to validate performance claims—not marketing hype. The Hipercomp Gen2 threads on with a left-hand metric pitch (M14x1 LH), common on many 7.62×39 barrels. Its .95-inch diameter keeps the profile clean and proportional, fitting naturally on mid-length builds without looking oversized. The brake comes with a crush washer, so you have everything needed for installation.
This is a solid choice for shooters who want to reduce recoil and muzzle climb on a 7.62×39 without breaking the bank or adding significant weight. Whether you're running steel-cased ammo at the range, training for accuracy, or setting up a reliable intermediate-power rifle, the Hipercomp Gen2 gives you a practical way to control your gun's behavior.
| Caliber | 7.62×39 |
| Thread Pattern | M14x1 Metric LH (Left-Hand) |
| Diameter | .95 inch |
| Weight | 3.2 oz |
| Finish | Black |
| Included | Crush washer |
Yes, as long as your barrel has an M14x1 left-hand metric thread. This is a common factory spec for 7.62×39 barrels. If you're unsure about your barrel's thread pitch, measure or contact the manufacturer before ordering.
The muzzle brake and a crush washer for installation. You'll need an armorer's wrench or proper tools to thread it on securely.
The Hipercomp Gen2 is designed to provide noticeable recoil and muzzle rise reduction during shooting. Exact felt reduction varies with ammunition power level and shooter setup, but the design has been verified through live-fire testing.
Yes. The Hipercomp Gen2 works well for both range training and hunting applications where you run 7.62×39. Its lightweight design keeps your rifle balanced, and the recoil reduction helps you manage follow-up shots and accuracy.
SKU: 121688284 • Width: 4.5in • Height: 2in • Depth: 6.5in • Weight: 0.31oz