Heckler & Koch114464083
Heckler & Koch VP9 Optics Mounting Plate #3 Black, C-More STS2$45.00
Availability: In Stock
The Heckler & Koch VP9 Optics Mounting Plate #1 is the direct-mount solution for shooters who want to add a compact red dot to their optics-ready VP9. This plate bridges the gap between your VP9's factory slide cut and the optics you actually want to run—no gunsmith required. If you've already invested in a Meopta MeoSight III, EoTech MRDS, Noblex Sight 3, or Meprolight microRDS, this plate lets you use that optic on your VP9 without modification.
Installation is straightforward: use the screws that hold the factory filler plate to secure the mounting plate to your slide. The engineering is clean and minimal—just what you need to co-witness your favorite compact red dot with your iron sights. This plate works exclusively with VP9 Optics Ready models, so confirm your slide cut before ordering. H&K does not perform custom optics cuts, so this factory plate is your path forward if you want factory-spec mounting.
Note that mounting plate compatibility is specific to optic model. The Plate #1 works with the Meopta MeoSight III, EoTech MRDS, Noblex Sight 3, and Meprolight microRDS. If you run an EoTech EFLX, you'll need the Plate #4 instead. Double-check your optic model number before buying to ensure the right fit.
| Manufacturer | Heckler & Koch |
| Model | VP9 Optics Mounting Plate #1 |
| Finish | Black |
| Compatible Firearms | VP9 Optics Ready models |
| Compatible Optics | Meopta MeoSight III, EoTech MRDS, Noblex Sight 3, Meprolight microRDS |
| Type | Direct-mount red dot plate |
No. The Plate #1 is compatible with the EoTech MRDS, not the EFLX. If you own an EFLX, you need the Heckler & Koch VP9 Optics Mounting Plate #4 instead.
No. The plate uses the screws that hold the factory filler plate, so installation is straightforward on any VP9 Optics Ready model. Your gun comes ready to accept this plate without modification.
This plate works only with VP9 Optics Ready models that have a factory-cut optics mounting surface. If your VP9 does not have this cut, H&K does not perform custom optics cuts on slides.
The Meopta MeoSight III, EoTech MRDS, Noblex Sight 3, and Meprolight microRDS are all compatible with this plate. Verify your exact optic model before ordering.
SKU: 114462481 • Width: 8.1in • Height: 0.3in • Depth: 16.3in • Weight: 0.07oz
Availability: In Stock
The Heckler & Koch VP9 Optics Mounting Plate #1 is the direct-mount solution for shooters who want to add a compact red dot to their optics-ready VP9. This plate bridges the gap between your VP9's factory slide cut and the optics you actually want to run—no gunsmith required. If you've already invested in a Meopta MeoSight III, EoTech MRDS, Noblex Sight 3, or Meprolight microRDS, this plate lets you use that optic on your VP9 without modification.
Installation is straightforward: use the screws that hold the factory filler plate to secure the mounting plate to your slide. The engineering is clean and minimal—just what you need to co-witness your favorite compact red dot with your iron sights. This plate works exclusively with VP9 Optics Ready models, so confirm your slide cut before ordering. H&K does not perform custom optics cuts, so this factory plate is your path forward if you want factory-spec mounting.
Note that mounting plate compatibility is specific to optic model. The Plate #1 works with the Meopta MeoSight III, EoTech MRDS, Noblex Sight 3, and Meprolight microRDS. If you run an EoTech EFLX, you'll need the Plate #4 instead. Double-check your optic model number before buying to ensure the right fit.
| Manufacturer | Heckler & Koch |
| Model | VP9 Optics Mounting Plate #1 |
| Finish | Black |
| Compatible Firearms | VP9 Optics Ready models |
| Compatible Optics | Meopta MeoSight III, EoTech MRDS, Noblex Sight 3, Meprolight microRDS |
| Type | Direct-mount red dot plate |
No. The Plate #1 is compatible with the EoTech MRDS, not the EFLX. If you own an EFLX, you need the Heckler & Koch VP9 Optics Mounting Plate #4 instead.
No. The plate uses the screws that hold the factory filler plate, so installation is straightforward on any VP9 Optics Ready model. Your gun comes ready to accept this plate without modification.
This plate works only with VP9 Optics Ready models that have a factory-cut optics mounting surface. If your VP9 does not have this cut, H&K does not perform custom optics cuts on slides.
The Meopta MeoSight III, EoTech MRDS, Noblex Sight 3, and Meprolight microRDS are all compatible with this plate. Verify your exact optic model before ordering.
SKU: 114462481 • Width: 8.1in • Height: 0.3in • Depth: 16.3in • Weight: 0.07oz