Hatsan144598545
Hatsan Usa Ha91010 Pcp Hand Pump 4500 Psi Black$113.33
Availability: In Stock
The Hatsan USA HA91015 PCP hand pump is built for airgun shooters who need a portable, manual way to charge their pre-charged pneumatic rifles and pistols to full capacity. Whether you're at the range, in the field, or between compressor visits, this 3625 PSI rated pump gives you independence and control over your gun's fill cycle without relying on external power or a fill station.
Hand pumps have earned their place in the airgun world because they work anywhere—no electricity, no compressor noise, no complicated setup. The Hatsan three-stage design breaks the work into manageable pressure steps, making the final fills less brutal on your body while you're chasing that last few hundred PSI. The built-in microbore hose and inline filter mean you're not hunting down adapters or worrying about moisture and contaminants getting into your gun's valve.
This pump is honest kit: it'll take some muscle and patience, especially as pressure climbs, but it's the kind of tool that makes sense for hunters who don't always have access to compressor networks, shooters maintaining backup guns, or anyone who values self-sufficiency at the range. Rated to 3625 PSI, it matches the fill requirements of most quality PCP airguns in circulation.
| Brand | Hatsan USA |
| Model | HA91015 |
| Type | Manual PCP Hand Pump |
| Maximum Pressure Rating | 3625 PSI |
| Design | 3-Stage |
| Hose Type | Microbore |
| Filter | Inline |
| Color | Black |
The Hatsan HA91015 is rated to 3625 PSI, which matches the fill pressure of most modern PCP rifles and pistols. Check your gun's manual or markings to confirm its recommended fill pressure—this pump will handle standard airgun fills at that spec.
The pump comes with a microbore hose and inline filter already attached, so you have everything needed to connect and fill. Depending on your gun's quick-disconnect fitting, you may want to verify compatibility beforehand, but the microbore standard is common across most quality airguns.
Hand pumps are practical for occasional fills, small-batch shooting sessions, or maintaining a backup gun. If you shoot heavily every weekend, a compressor makes more sense. Many serious airgunners keep a hand pump as emergency backup—it's reliable, quiet, and doesn't fail. The three-stage design makes high-pressure fills more manageable than older single-stage pumps.
The filter traps moisture, dust, and contaminants from the air you're pumping, so they don't get forced into your gun's valve and cylinder. This protects your airgun's lifespan and maintains consistent performance shot to shot.
SKU: 144598546 • Width: 7.6in • Height: 2.6in • Depth: 25.4in • Weight: 6.3oz
Availability: In Stock
The Hatsan USA HA91015 PCP hand pump is built for airgun shooters who need a portable, manual way to charge their pre-charged pneumatic rifles and pistols to full capacity. Whether you're at the range, in the field, or between compressor visits, this 3625 PSI rated pump gives you independence and control over your gun's fill cycle without relying on external power or a fill station.
Hand pumps have earned their place in the airgun world because they work anywhere—no electricity, no compressor noise, no complicated setup. The Hatsan three-stage design breaks the work into manageable pressure steps, making the final fills less brutal on your body while you're chasing that last few hundred PSI. The built-in microbore hose and inline filter mean you're not hunting down adapters or worrying about moisture and contaminants getting into your gun's valve.
This pump is honest kit: it'll take some muscle and patience, especially as pressure climbs, but it's the kind of tool that makes sense for hunters who don't always have access to compressor networks, shooters maintaining backup guns, or anyone who values self-sufficiency at the range. Rated to 3625 PSI, it matches the fill requirements of most quality PCP airguns in circulation.
| Brand | Hatsan USA |
| Model | HA91015 |
| Type | Manual PCP Hand Pump |
| Maximum Pressure Rating | 3625 PSI |
| Design | 3-Stage |
| Hose Type | Microbore |
| Filter | Inline |
| Color | Black |
The Hatsan HA91015 is rated to 3625 PSI, which matches the fill pressure of most modern PCP rifles and pistols. Check your gun's manual or markings to confirm its recommended fill pressure—this pump will handle standard airgun fills at that spec.
The pump comes with a microbore hose and inline filter already attached, so you have everything needed to connect and fill. Depending on your gun's quick-disconnect fitting, you may want to verify compatibility beforehand, but the microbore standard is common across most quality airguns.
Hand pumps are practical for occasional fills, small-batch shooting sessions, or maintaining a backup gun. If you shoot heavily every weekend, a compressor makes more sense. Many serious airgunners keep a hand pump as emergency backup—it's reliable, quiet, and doesn't fail. The three-stage design makes high-pressure fills more manageable than older single-stage pumps.
The filter traps moisture, dust, and contaminants from the air you're pumping, so they don't get forced into your gun's valve and cylinder. This protects your airgun's lifespan and maintains consistent performance shot to shot.
SKU: 144598546 • Width: 7.6in • Height: 2.6in • Depth: 25.4in • Weight: 6.3oz