Grovtec121686986
Grovtec G-nite Flsh Hider 9mm 1/2x28$39.56
Availability: In Stock
Current Stock: Out of stock
The Grovtec G-Nite Pronged Flash Hider for .223/5.56mm AR-platform rifles brings straightforward flash signature reduction to your rifle without unnecessary complexity. Built from one-piece steel, this 1/2x28 threaded muzzle device is designed for shooters who want effective flash control in dim-light or tactical scenarios—whether you're running drills at the range, hunting in low-light conditions, or training with your modern sporting rifle. Grovtec's commitment to American-made quality means you get a rugged accessory built to the same standards as tools trusted by serious shooters and military users.
Installation is simple: thread it directly onto your barrel using the included crush washer, which ensures a secure, properly-timed fit. The pronged design helps mitigate muzzle flash by directing gases and flame away from the shooter's field of view—a practical feature when every shot matters or when you need to maintain sight picture in variable lighting. The all-steel construction resists wear and heat cycling, so it'll keep performing through countless rounds without degradation.
This is a no-frills, effective flash hider for .223/5.56mm shooters who prioritize function over fashion. It fits any rifle with a 1/2x28 muzzle thread, making it a drop-in upgrade for most AR-15 builds and many other modern rifle platforms chambered in those cartridges.
| Caliber | .223/5.56mm |
| Thread Pitch | 1/2x28 |
| Material | Steel |
| Design | Pronged Flash Hider |
| Includes | Crush Washer |
Yes, if your barrel has a 1/2x28 thread pitch. This is the standard thread for .223/5.56mm AR-15 barrels. Check your rifle's barrel to confirm the thread pitch before ordering.
The crush washer ensures the flash hider times correctly on your barrel and creates a solid mounting base. It compresses slightly during installation to lock the device in place and maintain proper alignment.
This is a direct-thread device. It screws straight onto a 1/2x28 threaded barrel—no adapters needed. Just use the included crush washer during installation.
This is a flash hider, designed primarily to reduce the visible muzzle flash your rifle produces. A muzzle brake is optimized to manage recoil. This device focuses on keeping your sight picture clear in low-light shooting by minimizing flash signature.
SKU: 194201191 • Width: 3in • Height: 1.75in • Depth: 5.75in • Weight: 0.284oz
Availability: In Stock
Current Stock: Out of stock
The Grovtec G-Nite Pronged Flash Hider for .223/5.56mm AR-platform rifles brings straightforward flash signature reduction to your rifle without unnecessary complexity. Built from one-piece steel, this 1/2x28 threaded muzzle device is designed for shooters who want effective flash control in dim-light or tactical scenarios—whether you're running drills at the range, hunting in low-light conditions, or training with your modern sporting rifle. Grovtec's commitment to American-made quality means you get a rugged accessory built to the same standards as tools trusted by serious shooters and military users.
Installation is simple: thread it directly onto your barrel using the included crush washer, which ensures a secure, properly-timed fit. The pronged design helps mitigate muzzle flash by directing gases and flame away from the shooter's field of view—a practical feature when every shot matters or when you need to maintain sight picture in variable lighting. The all-steel construction resists wear and heat cycling, so it'll keep performing through countless rounds without degradation.
This is a no-frills, effective flash hider for .223/5.56mm shooters who prioritize function over fashion. It fits any rifle with a 1/2x28 muzzle thread, making it a drop-in upgrade for most AR-15 builds and many other modern rifle platforms chambered in those cartridges.
| Caliber | .223/5.56mm |
| Thread Pitch | 1/2x28 |
| Material | Steel |
| Design | Pronged Flash Hider |
| Includes | Crush Washer |
Yes, if your barrel has a 1/2x28 thread pitch. This is the standard thread for .223/5.56mm AR-15 barrels. Check your rifle's barrel to confirm the thread pitch before ordering.
The crush washer ensures the flash hider times correctly on your barrel and creates a solid mounting base. It compresses slightly during installation to lock the device in place and maintain proper alignment.
This is a direct-thread device. It screws straight onto a 1/2x28 threaded barrel—no adapters needed. Just use the included crush washer during installation.
This is a flash hider, designed primarily to reduce the visible muzzle flash your rifle produces. A muzzle brake is optimized to manage recoil. This device focuses on keeping your sight picture clear in low-light shooting by minimizing flash signature.
SKU: 194201191 • Width: 3in • Height: 1.75in • Depth: 5.75in • Weight: 0.284oz