Griffin Armament198468880
Griffin Armament GAOP7UMFDE-W Optimus 7 Utility Mount FDE$759.95
Availability: In Stock
The Griffin Armament Optimus 7 Utility Mount is a .30-caliber suppressor built on cutting-edge additive manufacturing technology—3D-printed core with a machined exterior that looks and performs like a traditionally built can. This is a serious suppressor for shooters who want low back pressure, excellent flash reduction, and a genuine lifetime warranty backing every shot. The Utility Mount (HUB 1.375″ 24 TPI) variant gives you flexibility to pair it with your choice of muzzle device, making it a smart pick if you're running different uppers or want to optimize the mounting system for your specific rifle.
What sets the Optimus 7 apart is Griffin's focus on gas flow and flash control without the penalty of excessive back pressure. The baffle stack is tuned lean for velocity retention and reliability, while the quad-tine flash-killer end cap does serious work downrange—especially valuable if you shoot suppressed in low light or care about muzzle signature. The 1.73-inch tube diameter gives you internal volume where it counts, and the full 17-4 stainless steel construction (including in-house machined blast shield and laser-welded assembly) means this thing will run hard for decades.
Note: this Utility Mount model does not include a muzzle device or HUB insert—you'll source those separately based on your caliber and rifle setup. That's actually a feature if you're building a suppressor ecosystem across multiple hosts. All Griffin Armament suppressors carry a Perpetual Lifetime Warranty, full auto rated, and backed by a company that's been serious about silencer engineering long before 3D printing became affordable.
| Caliber | .30 caliber (.308 WIN, .300 WM, etc.) |
| Tube Diameter | 1.73 inches |
| Mount Type | Utility Mount (HUB) 1.375″ 24 TPI |
| Material | 17-4 H900 stainless steel |
| Sound Reduction | -32.9 dB (135.9 dB measured on 16″ Troy .308-M118LR) |
| Finish | Black high-temp Cerakote |
| Full Auto Rated | Yes |
| Warranty | Perpetual Lifetime Warranty |
No. The Utility Mount (HUB) variant does not include a muzzle device or HUB insert—you must purchase those separately based on your rifle's caliber and thread pitch. This gives you the flexibility to match the suppressor to your preferred mounting system.
The Optimus 7 comes in three mounting variants: Taper Mount DUAL-LOK®, Taper Mount (with included EZ-Brake), and Utility Mount (HUB). The Utility Mount uses a 1.375″ 24 TPI hub interface and requires you to source your own muzzle device, making it ideal if you already have compatible equipment or want to standardize across multiple rifles.
Yes. The Optimus 7 is full auto rated and features a low back pressure baffle design that minimizes system pressure while maintaining flash and sound reduction. The 17-4 stainless steel construction and laser-welded assembly are built to handle sustained fire.
The additive manufacturing process allows Griffin to optimize the baffle stack for low back pressure and gas flow while maintaining excellent flash and sound reduction—something harder to achieve with traditional machining. The core is 3D-printed, then the exterior is machined smooth, and the blast shield and mount are machined in-house and laser-welded on, giving you a finished product that looks and performs like a conventional suppressor with the engineering advantages of modern manufacturing.
SKU: 198468874 • Weight: 0.956oz
Availability: In Stock
The Griffin Armament Optimus 7 Utility Mount is a .30-caliber suppressor built on cutting-edge additive manufacturing technology—3D-printed core with a machined exterior that looks and performs like a traditionally built can. This is a serious suppressor for shooters who want low back pressure, excellent flash reduction, and a genuine lifetime warranty backing every shot. The Utility Mount (HUB 1.375″ 24 TPI) variant gives you flexibility to pair it with your choice of muzzle device, making it a smart pick if you're running different uppers or want to optimize the mounting system for your specific rifle.
What sets the Optimus 7 apart is Griffin's focus on gas flow and flash control without the penalty of excessive back pressure. The baffle stack is tuned lean for velocity retention and reliability, while the quad-tine flash-killer end cap does serious work downrange—especially valuable if you shoot suppressed in low light or care about muzzle signature. The 1.73-inch tube diameter gives you internal volume where it counts, and the full 17-4 stainless steel construction (including in-house machined blast shield and laser-welded assembly) means this thing will run hard for decades.
Note: this Utility Mount model does not include a muzzle device or HUB insert—you'll source those separately based on your caliber and rifle setup. That's actually a feature if you're building a suppressor ecosystem across multiple hosts. All Griffin Armament suppressors carry a Perpetual Lifetime Warranty, full auto rated, and backed by a company that's been serious about silencer engineering long before 3D printing became affordable.
| Caliber | .30 caliber (.308 WIN, .300 WM, etc.) |
| Tube Diameter | 1.73 inches |
| Mount Type | Utility Mount (HUB) 1.375″ 24 TPI |
| Material | 17-4 H900 stainless steel |
| Sound Reduction | -32.9 dB (135.9 dB measured on 16″ Troy .308-M118LR) |
| Finish | Black high-temp Cerakote |
| Full Auto Rated | Yes |
| Warranty | Perpetual Lifetime Warranty |
No. The Utility Mount (HUB) variant does not include a muzzle device or HUB insert—you must purchase those separately based on your rifle's caliber and thread pitch. This gives you the flexibility to match the suppressor to your preferred mounting system.
The Optimus 7 comes in three mounting variants: Taper Mount DUAL-LOK®, Taper Mount (with included EZ-Brake), and Utility Mount (HUB). The Utility Mount uses a 1.375″ 24 TPI hub interface and requires you to source your own muzzle device, making it ideal if you already have compatible equipment or want to standardize across multiple rifles.
Yes. The Optimus 7 is full auto rated and features a low back pressure baffle design that minimizes system pressure while maintaining flash and sound reduction. The 17-4 stainless steel construction and laser-welded assembly are built to handle sustained fire.
The additive manufacturing process allows Griffin to optimize the baffle stack for low back pressure and gas flow while maintaining excellent flash and sound reduction—something harder to achieve with traditional machining. The core is 3D-printed, then the exterior is machined smooth, and the blast shield and mount are machined in-house and laser-welded on, giving you a finished product that looks and performs like a conventional suppressor with the engineering advantages of modern manufacturing.
SKU: 198468874 • Weight: 0.956oz