Griffin Armament115711558
Griffin Armament CAM-LOK Barrel Adapter - 9/16x24 PI91624$55.15
Availability: In Stock
The Griffin Armament CAM-LOK Barrel Adapter (PI1351LH) is a quick-detach piston interface designed for Browning-style tilting-barrel pistols. If you run a suppressor on a pistol that uses a tilt-barrel action—think most modern handguns—this adapter lets you swap between suppressed and unsuppressed configurations in seconds, with a rock-solid lock-up that beats traditional single-piece direct-thread pistons. The CAM-LOK system is patented and built around a covert application mount architecture that prioritizes both speed and security on the firing line or in the field.
Built for shooters who demand reliability under pressure, the adapter features a forward taper surface that locks securely with the interfacing piston, which helps eliminate the baffle and end cap strikes that can plague poorly-seated suppressors. The coarse threads are cut at the top for added durability and wear resistance—important when you're mounting and dismounting regularly. Installation is straightforward: the 3/4-inch (19mm) wrench pattern accepts a standard socket wrench for snug, confident installation every time.
This is a 13.5×1 left-hand threaded adapter, compatible with Griffin's Universal QD pistons (sold separately). The QPQ Nitride finish delivers both aesthetics and protection, with a clean black appearance that resists corrosion. Total system weight matches legacy direct-thread pistons, so you're not adding bulk to your suppressor package. The internal bore geometry is optimized to reduce side concussion and visual disturbance compared to blind muzzle designs, keeping your shooting experience smooth and your sight picture uncompromised.
| Adapter Type | CAM-LOK Quick-Detach Piston Interface |
| Thread Size | 13.5×1 Left-Hand |
| Compatible Pistol Action | Browning-style tilt-barrel |
| Wrench Pattern | 3/4" (19mm) |
| Mounting Positions | 3, separated 120 degrees |
| Finish | QPQ Nitride |
| Piston Compatibility | Universal QD pistons (sold separately) |
The CAM-LOK is designed for Browning-style tilt-barrel action pistols. Verify that your pistol has a tilt-barrel design and a compatible 13.5×1 left-hand threaded barrel before purchase. The adapter threads directly onto the barrel.
The adapter itself is the barrel interface; you'll need to purchase a Griffin Armament Universal QD piston separately. The piston attaches to the adapter and mates with your suppressor.
The 3/4-inch wrench pattern accepts a standard socket wrench for installation on the barrel. Use the wrench to thread the adapter onto your barrel with a secure, firm fit. No special tools beyond a standard socket wrench are required.
Yes. The forward taper surface locks securely with the interfacing piston, which is designed to reduce or eliminate common baffle and end cap strikes that can occur with less secure mounting systems.
SKU: 115693095 • Width: 4.25in • Height: 0.75in • Depth: 5.75in • Weight: 0.06oz
Availability: In Stock
The Griffin Armament CAM-LOK Barrel Adapter (PI1351LH) is a quick-detach piston interface designed for Browning-style tilting-barrel pistols. If you run a suppressor on a pistol that uses a tilt-barrel action—think most modern handguns—this adapter lets you swap between suppressed and unsuppressed configurations in seconds, with a rock-solid lock-up that beats traditional single-piece direct-thread pistons. The CAM-LOK system is patented and built around a covert application mount architecture that prioritizes both speed and security on the firing line or in the field.
Built for shooters who demand reliability under pressure, the adapter features a forward taper surface that locks securely with the interfacing piston, which helps eliminate the baffle and end cap strikes that can plague poorly-seated suppressors. The coarse threads are cut at the top for added durability and wear resistance—important when you're mounting and dismounting regularly. Installation is straightforward: the 3/4-inch (19mm) wrench pattern accepts a standard socket wrench for snug, confident installation every time.
This is a 13.5×1 left-hand threaded adapter, compatible with Griffin's Universal QD pistons (sold separately). The QPQ Nitride finish delivers both aesthetics and protection, with a clean black appearance that resists corrosion. Total system weight matches legacy direct-thread pistons, so you're not adding bulk to your suppressor package. The internal bore geometry is optimized to reduce side concussion and visual disturbance compared to blind muzzle designs, keeping your shooting experience smooth and your sight picture uncompromised.
| Adapter Type | CAM-LOK Quick-Detach Piston Interface |
| Thread Size | 13.5×1 Left-Hand |
| Compatible Pistol Action | Browning-style tilt-barrel |
| Wrench Pattern | 3/4" (19mm) |
| Mounting Positions | 3, separated 120 degrees |
| Finish | QPQ Nitride |
| Piston Compatibility | Universal QD pistons (sold separately) |
The CAM-LOK is designed for Browning-style tilt-barrel action pistols. Verify that your pistol has a tilt-barrel design and a compatible 13.5×1 left-hand threaded barrel before purchase. The adapter threads directly onto the barrel.
The adapter itself is the barrel interface; you'll need to purchase a Griffin Armament Universal QD piston separately. The piston attaches to the adapter and mates with your suppressor.
The 3/4-inch wrench pattern accepts a standard socket wrench for installation on the barrel. Use the wrench to thread the adapter onto your barrel with a secure, firm fit. No special tools beyond a standard socket wrench are required.
Yes. The forward taper surface locks securely with the interfacing piston, which is designed to reduce or eliminate common baffle and end cap strikes that can occur with less secure mounting systems.
SKU: 115693095 • Width: 4.25in • Height: 0.75in • Depth: 5.75in • Weight: 0.06oz