Grey Ghost Gear115647937
Ggp Slide For Glk 19 Gen3 Rmr$413.99
Availability: In Stock
Current Stock: Out of stock
The Grey Ghost Precision GGP Slide for Glock 19 Gen5 RMR V6 in OD Green is a precision-machined replacement slide built for shooters who want to run an optic on their duty or carry gun without sacrificing accuracy or reliability. Machined from 17-4 billet stainless steel, this slide delivers tighter tolerances than factory Glock slides while keeping weight down—a real advantage if you're running your pistol hard at the range or in competition. The Gen5 compatibility means it drops right into your existing Glock 19 Gen5 frame with no gunsmithing required.
The Version 6 pattern is pure function: angled plateaus and valleys machine-cut into the sides and top of the slide reduce weight without sacrificing rigidity, and they give the gun a distinctive, tactical look. More importantly, the dual optic mounting cuts accept both Trijicon RMR and Leupold DeltaPoint Pro optics—two of the most proven red dots in the pistol world. GGP includes shim plates so you can dial in your zero precisely, plus a custom G10 cover plate and all the correct screws needed for RMR, DeltaPoint Pro, or cover-plate mounting. The OD Green finish offers a modern aesthetic while holding up to the wear and tear of serious shooting.
This is a stripped slide, meaning you're buying the housing—bolt catch, firing pin, extractor, and internals are not included. It's a straight swap onto your Gen5 lower receiver. If you're upgrading from a factory slide or building a dedicated optics-ready Glock 19, the GGP gives you precision manufacturing and proven dual-mount compatibility in one package.
| Brand | Grey Ghost Precision |
| Model | GGP Slide for Glock 19 Gen5 RMR V6 |
| Material | 17-4 Billet Stainless Steel |
| Finish | OD Green Cerakote |
| Compatible Optics | Trijicon RMR, Leupold DeltaPoint Pro |
| Compatibility | Glock 19 Gen5 |
| Slide Type | Stripped (internals not included) |
| Included Accessories | Shim plates, custom G10 cover plate, mounting screws (RMR, DPP, cover plate) |
Yes. The GGP slide is machined specifically for Glock 19 Gen5 compatibility and will install directly onto your Gen5 lower receiver. This is a stripped slide, so you'll keep your existing trigger assembly, firing pin, and internals—it's purely a slide-for-slide swap.
The dual optic cutout is machined for Trijicon RMR and Leupold DeltaPoint Pro. Shim plates are included to fine-tune your mount. The slide is not compatible with Vortex or Aimpoint optics.
This is a stripped slide—you're purchasing the housing only. Internals such as the firing pin, extractor, and bolt catch are not included. Those components transfer from your factory Glock 19 Gen5 slide or must be purchased separately.
The slide comes with shim plates for optic mounting, a custom G10 cover plate, and all necessary screws for mounting an RMR, DeltaPoint Pro, or the cover plate itself.
SKU: 115847459 • Width: 3in • Height: 2.58in • Depth: 9.12in • Weight: 1oz
Availability: In Stock
Current Stock: Out of stock
The Grey Ghost Precision GGP Slide for Glock 19 Gen5 RMR V6 in OD Green is a precision-machined replacement slide built for shooters who want to run an optic on their duty or carry gun without sacrificing accuracy or reliability. Machined from 17-4 billet stainless steel, this slide delivers tighter tolerances than factory Glock slides while keeping weight down—a real advantage if you're running your pistol hard at the range or in competition. The Gen5 compatibility means it drops right into your existing Glock 19 Gen5 frame with no gunsmithing required.
The Version 6 pattern is pure function: angled plateaus and valleys machine-cut into the sides and top of the slide reduce weight without sacrificing rigidity, and they give the gun a distinctive, tactical look. More importantly, the dual optic mounting cuts accept both Trijicon RMR and Leupold DeltaPoint Pro optics—two of the most proven red dots in the pistol world. GGP includes shim plates so you can dial in your zero precisely, plus a custom G10 cover plate and all the correct screws needed for RMR, DeltaPoint Pro, or cover-plate mounting. The OD Green finish offers a modern aesthetic while holding up to the wear and tear of serious shooting.
This is a stripped slide, meaning you're buying the housing—bolt catch, firing pin, extractor, and internals are not included. It's a straight swap onto your Gen5 lower receiver. If you're upgrading from a factory slide or building a dedicated optics-ready Glock 19, the GGP gives you precision manufacturing and proven dual-mount compatibility in one package.
| Brand | Grey Ghost Precision |
| Model | GGP Slide for Glock 19 Gen5 RMR V6 |
| Material | 17-4 Billet Stainless Steel |
| Finish | OD Green Cerakote |
| Compatible Optics | Trijicon RMR, Leupold DeltaPoint Pro |
| Compatibility | Glock 19 Gen5 |
| Slide Type | Stripped (internals not included) |
| Included Accessories | Shim plates, custom G10 cover plate, mounting screws (RMR, DPP, cover plate) |
Yes. The GGP slide is machined specifically for Glock 19 Gen5 compatibility and will install directly onto your Gen5 lower receiver. This is a stripped slide, so you'll keep your existing trigger assembly, firing pin, and internals—it's purely a slide-for-slide swap.
The dual optic cutout is machined for Trijicon RMR and Leupold DeltaPoint Pro. Shim plates are included to fine-tune your mount. The slide is not compatible with Vortex or Aimpoint optics.
This is a stripped slide—you're purchasing the housing only. Internals such as the firing pin, extractor, and bolt catch are not included. Those components transfer from your factory Glock 19 Gen5 slide or must be purchased separately.
The slide comes with shim plates for optic mounting, a custom G10 cover plate, and all necessary screws for mounting an RMR, DeltaPoint Pro, or the cover plate itself.
SKU: 115847459 • Width: 3in • Height: 2.58in • Depth: 9.12in • Weight: 1oz