Promag115860130
PROMAG MAG AR-308 LR-308 SR25 308WIN 10RD STEEL$24.55
Availability: In Stock
Current Stock: Out of stock
The Geissele Reaction Rod Vise Block for LR-308, AR-10, and SR25 is a precision steel gunsmithing tool that transforms barrel work on large-frame rifles. If you're building or maintaining an AR-10, this rod solves a real problem: instead of clamping your upper receiver in a vise block—where twisting forces can ding the aluminum and bind on the receiver pin—the Reaction Rod transfers all that torque directly to the barrel extension. You mount the rod horizontally or vertically in a bench vise, slide your upper onto it, and the integral splines lock into the barrel extension. That means barrel nut, flash hider, gas block, and handguard removal and installation happen faster and cleaner, without marring your receiver's finish or requiring you to remove optics and rail furniture.
Built from precision steel, the Reaction Rod weighs 3.52 lbs and measures 12.80 × 1.80 × 1.50 inches. It's designed for SR25 Pattern, DPMS/LR308 Pattern, and AR10 Pattern upper receivers—the three dominant large-frame platforms in the AR world. This is essential kit for anyone who swaps barrels regularly, whether you're optimizing for different ranges or calibers, troubleshooting a build, or just maintaining your rifle. The engineering is simple and elegant: by keeping stress off the receiver itself, you preserve your rifle's structural integrity and cosmetics, and you'll actually finish the job faster than wrestling with a conventional block.
If you work on AR-10s in any capacity—gunsmiths, serious builders, or precision shooters who take their own rifles apart—this tool pays for itself in saved receivers and sanity. It's not flashy, but it's exactly what you need on the bench.
| Weight | 3.52 lbs (57 oz) |
| Dimensions | 12.80 × 1.80 × 1.50 inches |
| Material | Precision steel |
| Compatible Patterns | SR25, DPMS/LR308, AR10 |
The Reaction Rod is designed for SR25 Pattern, DPMS/LR308 Pattern, and AR10 Pattern upper receivers. It is not compatible with DPMS G2 Pattern, DD5 V4, .308 HK MR7.62, or HK417 platforms.
Yes. Unlike traditional vise blocks that require you to clamp the receiver itself, the Reaction Rod works via the barrel extension, so you don't need to remove sights, scopes, mounts, or other M1913 rail furniture.
The Reaction Rod is designed to be gripped in a standard bench vise and can be positioned horizontally or vertically depending on your setup and preference.
A reaction rod transfers barrel-nut torque directly to the barrel extension via its integral splines, rather than through the upper receiver and its receiver pin. This protects your receiver from being marred or distorted, and it's a more direct, efficient way to do the work.
SKU: 115693336 • Width: 1.8in • Height: 1.5in • Depth: 12.8in • Weight: 3.56oz
Availability: In Stock
Current Stock: Out of stock
The Geissele Reaction Rod Vise Block for LR-308, AR-10, and SR25 is a precision steel gunsmithing tool that transforms barrel work on large-frame rifles. If you're building or maintaining an AR-10, this rod solves a real problem: instead of clamping your upper receiver in a vise block—where twisting forces can ding the aluminum and bind on the receiver pin—the Reaction Rod transfers all that torque directly to the barrel extension. You mount the rod horizontally or vertically in a bench vise, slide your upper onto it, and the integral splines lock into the barrel extension. That means barrel nut, flash hider, gas block, and handguard removal and installation happen faster and cleaner, without marring your receiver's finish or requiring you to remove optics and rail furniture.
Built from precision steel, the Reaction Rod weighs 3.52 lbs and measures 12.80 × 1.80 × 1.50 inches. It's designed for SR25 Pattern, DPMS/LR308 Pattern, and AR10 Pattern upper receivers—the three dominant large-frame platforms in the AR world. This is essential kit for anyone who swaps barrels regularly, whether you're optimizing for different ranges or calibers, troubleshooting a build, or just maintaining your rifle. The engineering is simple and elegant: by keeping stress off the receiver itself, you preserve your rifle's structural integrity and cosmetics, and you'll actually finish the job faster than wrestling with a conventional block.
If you work on AR-10s in any capacity—gunsmiths, serious builders, or precision shooters who take their own rifles apart—this tool pays for itself in saved receivers and sanity. It's not flashy, but it's exactly what you need on the bench.
| Weight | 3.52 lbs (57 oz) |
| Dimensions | 12.80 × 1.80 × 1.50 inches |
| Material | Precision steel |
| Compatible Patterns | SR25, DPMS/LR308, AR10 |
The Reaction Rod is designed for SR25 Pattern, DPMS/LR308 Pattern, and AR10 Pattern upper receivers. It is not compatible with DPMS G2 Pattern, DD5 V4, .308 HK MR7.62, or HK417 platforms.
Yes. Unlike traditional vise blocks that require you to clamp the receiver itself, the Reaction Rod works via the barrel extension, so you don't need to remove sights, scopes, mounts, or other M1913 rail furniture.
The Reaction Rod is designed to be gripped in a standard bench vise and can be positioned horizontally or vertically depending on your setup and preference.
A reaction rod transfers barrel-nut torque directly to the barrel extension via its integral splines, rather than through the upper receiver and its receiver pin. This protects your receiver from being marred or distorted, and it's a more direct, efficient way to do the work.
SKU: 115693336 • Width: 1.8in • Height: 1.5in • Depth: 12.8in • Weight: 3.56oz